Ghent University Academic Bibliography

Journal Article
A1
open access

Novel design for an additively manufactured nozzle to produce tubular scaffolds via fused filament fabrication

Bahaa Shaqour (UGent) , Żaneta Górecka, Agnieszka Chmielewska, Bartłomiej Wysocki, Marcin Heljak, Maarten Gernaey, Bart Verleije, Koen Beyers, Chris Vervaet (UGent) , Emilia Choińska, et al.

(2022) ADDITIVE MANUFACTURING. 49.

Add to list

Journal Article
A2
open access

Validation of devices for characterization of hybrid 3D printed embroidery TENG for energy harvesting

Hasan Riaz Tahir (UGent) , Benny Malengier (UGent) , Carla Hertleer (UGent) and Lieva Van Langenhove (UGent)

(2022) COMMUNICATIONS IN DEVELOPMENT AND ASSEMBLING OF TEXTILE PRODUCTS. 3(1). p.1-8

Add to list

Melt exit flow modelling and experimental validation for fused filament fabrication : from Newtonian to non-Newtonian effects

Tom Van Waeleghem (UGent) , Flavio H. Marchesini (UGent) , Ludwig Cardon (UGent) and Dagmar D'hooge (UGent)

(2022) JOURNAL OF MANUFACTURING PROCESSES. 77. p.138-150

Add to list

Journal Article
A1
open access

Increasing the sustainability of the hybrid mold technique through combined insert polymeric material and additive manufacturing method design

Ellen Fernandez (UGent) , Mariya Edeleva (UGent) , Rudinei Fiorio (UGent) , Ludwig Cardon (UGent) and Dagmar D'hooge (UGent)

(2022) SUSTAINABILITY. 14(2).

Add to list

Journal Article
A1
open access

Surface plastic flow of three-dimensional printed polylactic acid in the tribological study of surface patterned polymer

M. Ando, M. Birosz, G. S. Gehlen, P. D. Neis, N. F. Ferreira and Jacob Sukumaran (UGent)

(2022) MEASUREMENT SCIENCE AND TECHNOLOGY. 33(2).

Add to list

Journal Article
A1
open access

Setting the optimal laser power for sustainable powder bed fusion processing of elastomeric polyesters : a combined experimental and theoretical study

Ruben Vande Ryse (UGent) , Mariya Edeleva (UGent) , Ortwijn Van Stichel, Dagmar D'hooge (UGent) , Frederik Pille (UGent) , Rudinei Fiorio (UGent) , Patrick De Baets (UGent) and Ludwig Cardon (UGent)

(2022) MATERIALS. 15(1).

Add to list

Hydration re-initiation of borated CSA systems with a two-stage mixing process : an application in extrusion-based concrete 3D printing

Manu K Mohan (UGent) , A. V. Rahul, Yaxin Tao (UGent) , Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2022) CEMENT AND CONCRETE RESEARCH. 159.

Add to list

Transport properties of 3D printed cementitious materials with prolonged time gap between successive layers

Jolien Van Der Putten (UGent) , Melissa De Volder, Philip Van den Heede (UGent) , Maxim Deprez (UGent) , Veerle Cnudde (UGent) , Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2022) CEMENT AND CONCRETE RESEARCH. 155.

Add to list

Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content

Manu K Mohan (UGent) , Rahul Attupurathu Vijayan (UGent) , Kim Van Tittelboom (UGent) and Geert De Schutter (UGent)

(2021) CEMENT AND CONCRETE RESEARCH. 139.

Add to list

Early age hydration, rheology and pumping characteristics of CSA cement-based 3D printable concrete

Manu K Mohan (UGent) , Rahul Attupurathu Vijayan (UGent) , Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2021) CONSTRUCTION AND BUILDING MATERIALS. 275.

Academic Bibliography

Novel design for an additively manufactured nozzle to produce tubular scaffolds via fused filament fabrication

Validation of devices for characterization of hybrid 3D printed embroidery TENG for energy harvesting

Melt exit flow modelling and experimental validation for fused filament fabrication : from Newtonian to non-Newtonian effects

Increasing the sustainability of the hybrid mold technique through combined insert polymeric material and additive manufacturing method design

Surface plastic flow of three-dimensional printed polylactic acid in the tribological study of surface patterned polymer

Setting the optimal laser power for sustainable powder bed fusion processing of elastomeric polyesters : a combined experimental and theoretical study

Hydration re-initiation of borated CSA systems with a two-stage mixing process : an application in extrusion-based concrete 3D printing

Transport properties of 3D printed cementitious materials with prolonged time gap between successive layers

Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content

Early age hydration, rheology and pumping characteristics of CSA cement-based 3D printable concrete

Contents

Support

Contact