Show
Sort by
-
- Journal Article
- A1
- open access
Development of a stereovision-based technique to measure the spread patterns of granular fertilizer spreaders
-
Reduction of ammonia emissions from dairy cattle cubicle houses via improved management- or design-based strategies : a modeling approach
-
Space-time integral method for simplifying the modeling of torrefaction of a centimeter-sized biomass particle
-
Effect of sampling density on the reliability of airflow rate measurements in a naturally ventilated animal mock-up building
-
Assessing airflow rates of a naturally ventilated test facility using a fast and simple algorithm supported by local air velocity measurements
-
Effects of standard k-ε and LES turbulence models on a full scale numerical CFD simulation for a naturally ventilated pig barn prototype
-
Methodology for airflow rate measurements in a naturally ventilated mock-up animal building with side and ridge vents
-
- Journal Article
- A1
- open access
Effect of foam on temperature prediction and heat recovery potential from biological wastewater treatment
-
Finite element and space-time integral models for biomass torrefaction
-
Wind tunnel study of ammonia transfer from a manure pit fitted with a dairy cattle slatted floor
-
Finite element modeling of intraparticle heterogeneous tar conversion during pyrolysis of woody biomass particles
-
- Journal Article
- A1
- open access
Spray droplet characterization from a single nozzle by high speed image analysis using an in-focus droplet criterion
-
Spray droplet characteristics measured using high speed imaging techniques
-
Infrared heating as a disinfestation method against Sitophilus oryzae and its effect on textural and cooking properties of milled rice
-
- Journal Article
- A1
- open access
Mechanistic modeling of pollutant removal, temperature, and evaporation in chemical air scrubbers
-
3D Eulerian-Eulerian simulations of particle flow dynamics and back-mixing in a screw reactor for biomass pyrolysis
-
Comparing different methods of using collecting trays to determine the spatial distribution of fertiliser particles
-
Determining the effect of wind on the ballistic flight of fertiliser particles
-
Development of a multi-scale model for deep-bed drying of rice
-
Development of a reference method for airflow rate measurements through rectangular vents towards application in naturally ventilated animal houses, part 3: application in a test facility in the open
-
- Journal Article
- A1
- open access
Development of a high irradiance LED configuration for small field of view motion estimation of fertilizer particles
-
Development of high-speed image acquisition systems for spray characterization based on single-droplet experiments
-
Droplet generation and characterization using a piezoelectric droplet generator and high speed imaging techniques
-
Measuring the dynamic mass flow from a centrifugal fertilizer spreader
-
Comparison of different spread pattern determination techniques
-
- Conference Paper
- P1
- open access
Image based techniques for determining spread patterns of centrifugal fertilizer spreaders
-
- Conference Paper
- P1
- open access
Pesticide spray characterisation using high speed imaging techniques
-
Numerical study of air humidity and temperature distribution in a top-spray fluidised bed coating process
-
Development of a reference method for airflow rate measurements through rectangular vents towards application in naturally ventilated animal houses, part 2: automated 3D approach
-
Development of a reference method for airflow rate measurements through rectangular vents towards application in naturally ventilated animal houses, part 1: manual 2D approach
-
Predicting spread patterns of centrifugal fertiliser spreaders
-
Determing the drag coefficient of fertilizer grains using stereovision
-
Assesing natural ventilation rates using a combined measuring and modelling approach
-
- Journal Article
- A1
- open access
High speed stereovision setup for position and motion estimation of fertilizer particles leaving a centrifugal spreader
-
Spray nozzle characterization using a backlighted high speed imaging technique
-
A simulation of the influence of spinning on the ballistic flight of spherical fertiliser grains
-
Effect of spray angle and spray volume on deposition of a medium droplet spray with air support in ivy pot plants
-
Coupling CFD and diffusion models for analyzing the convective drying behavior of a single rice kernel
-
- Journal Article
- A1
- open access
The HMI™ module: a new tool to study the host-microbiota interaction in the human gastrointestinal tract in vitro
-
Modelling the thermal performance of a naturally ventilated greenhouse in Zimbabwe using a dynamic greenhouse climate model
-
Airflow measurements in and around scale-model cattle barns in a wind tunnel: effect of wind incidence angle
-
Measurement of single droplet characteristics using high speed imaging techniques
-
Estimation of leaf wetness duration for greenhouse roses using a dynamic greenhouse climate model in Zimbabwe
-
Modelling overall particle motion in fluidised beds for top-spray coating processes
-
- Conference Paper
- C1
- open access
Multi-scale model for heat and mass transfer during rice drying
-
- Conference Paper
- C1
- open access
Modeling deep-bed grain drying using Comsol Multiphysics
-
- Conference Paper
- C1
- open access
Field test facility for the development of a reference method for ventilation rate and emission measurements in naturally ventilated pig houses
-
Development of a reference method for the measurement of the ventilation rate through rectangular ventilation openings using ultrasonic anemometers
-
A real-scale test facility for the study of ammonia emissions from a slurry pit: effect of airflow rate and airflow direction at the slatted floor level
-
Towards 15 years of reliable biological manure treatment in Flanders
-
Anaerobic digester sustained by aerobic digestate treatment
-
Spray nozzle characterization using high speed imaging techniques
-
- Conference Paper
- P1
- open access
Computational modelling and scale model validation of airflow patterns in naturally ventilated barns
-
Attrition strength of water-soluble cellulose derivative coatings applied on different core materials
-
Comparing spray gun and spray boom applications in two ivy crops with different crop densities
-
Modelling the bed characteristics in fluidised-beds for top-spray coating processes
-
Coating quality as affected by core particle segregation in fluidized bed processing
-
Development of an imaging system for single droplet characterization using a droplet generator
-
Spray deposition and distribution in a bay laurel crop as affected by nozzle type, air assistance and spray direction when using vertical spray booms
-
A vertical spray boom application technique for conical bay laurel (Laurus nobilis) plants
-
- Conference Paper
- C1
- open access
3D Simulation with virtual stereo rig for optimizing centrifugal fertilizer spreading
-
Airflow measurements in and around scale model cattle barns in a wind tunnel: effect of ventilation opening height
-
Computational fluid dynamics (CFD) modelling of the fluidised bed coating process
-
An integrated study to improve spray deposition in a dense crop with a horizontal leaf position
-
Modelling particle random walk in a confined environment for inclusion in fluidised bed applications
-
- Journal Article
- A1
- open access
CFD study of droplet atomisation using a binary nozzle in fluidised bed coating
-
Particle surface moisture content estimation using population balance modelling in fluidised bed agglomeration
-
- Book Chapter
- open access
The use of high-speed imaging systems for applications in precision agriculture
-
Effect of atomisation air pressure on solids concentration in a fluidised-bed coater
-
CFD study of solids concentration in a fluidised-bed coater with variation of atomisation air pressure
-
Modelling coating quality in fluidised bed coating: spray sub-model
-
Two-step cross correlation–based algorithm for motion estimation applied to fertilizer granules' motion during centrifugal spreading
-
Influence of particle surface moisture content on the growth rate in fluidised bed agglomeration
-
Modelling coating quality in fluidized bed coating: spray and particle submodel
-
Attrition strength of water-soluble cellulose derivatives coatings
-
The effects of whitening and dust accumulation on the microclimate and canopy behaviour of rose plants (Rosa hybrida) in a greenhouse in Zimbabwe
-
Effect of spray application technique on spray deposition in greenhouse strawberries and tomatoes
-
- Journal Article
- A1
- open access
Measurement and simulation of the ventilation rates in a naturally ventilated Azrom type greenhouse in Zimbabwe
-
Application of a tracer aerosol technique using atomized sodium chloride particles for measuring ventilation rates in a naturally ventilated Azrom-type greenhouse in Zimbabwe
-
Comparison and evaluation of interphase momentum exchange models for simulation of the solids volume fraction in tapered fluidised beds
-
Perspectives of fluidized bed coating in the food industry
-
Multi-phase cross-correlation method for motion estimation of fertiliser granules during centrifugal spreading
-
- Conference Paper
- C3
- open access
A 3-D stereovision system for fertilizer granule characterization
-
- Conference Paper
- P1
- open access
Modelling of particle surface moisture content to estimate growth rate in fluidised bed agglomeration
-
- Conference Paper
- P1
- open access
A global coating quality model for top-spray fluidized beds: spray sub model
-
A device for extracting 3D information of fertilizer trajectories
-
The top-spray fluidised bed coating process: a new quality model
-
PEPT visualisation of particle motion in a tapered fluidised bed coater
-
Quantification of microparticle coating quality by confocal laser scanning microscopy (CLSM)
-
Water soluble cellulose derivatives as coating agents in fluidized bed processing
-
- Journal Article
- A1
- open access
Technical and economic feasibility of gradual concentric chambers reactor for sewage treatment in developing countries
-
Modelling coating quality in fluidised bed coating : spray model
-
Modelling heat and mass transfer in batch, top-spray fluidised bed coating processes
-
Influence of combined IR-grilling and hot air cooking conditions on moisture and fat content, texture and colour attributes of meat patties
-
Influence of spray application technique on spray deposition in greenhouse ivy pot plants grown on hanging shelves
-
Dry starch particle coating: optimization and coating quality measurement by CLSM
-
Catalytic upgrading of biomass fast pyrolysis oils
-
Effets des outils de reprise de labour sur l'état structural du sol et le rendement d'une culture de pomme de terre
-
Water-soluble cellulose derivatives as coating agents in fluidized bed processing
-
Effect of maximum packing limit on granular flow pattern in the top-spray fluidised bed coater
-
Coating processes in fluidised beds: quality control model based on population balance theory
-
Population balance model for quality control of coating processes in fluidised beds
-
Modelling side-effect spray drying in top-spray fluidised bed coating processes
-
Computational study of the multiphase flow in the fluidised bed equipment
-
Impacts de la vitesse d’avancement du tracteur sur la structure du sol et le rendement d'une culture de pomme de terre
-
Characterization of fluidized bed coating and microcapsule quality
-
Modelling heat and mass transfer in batch, top-spray fluidised bed coating processes
-
Restafval
-
Accelerated solid-phase dynamic extraction of toluene from air
-
A CFD model based on optimisation of fluidised-bed coating process for food ingredients
-
Modelling heat and mass transfer in a naturally ventilated greenhouse in Zimbabwe
-
Coating quality as a function of coating material properties: water-soluble cellulose derivatives as coating agents
-
Energy production from biomass obtained by extensive production of algae or aquatic plants
-
Modelling heat and mass transfer during the industrial processing of meat products
-
Coating quality as a function of coating material properties: methylcellulose as a coating agent
-
Coating quality as a function of coating material properties : water-soluble cellulose derivatives as coating agents
-
Modelling heat and mass transfer in batch, top-spray fluidised bed coating processes
-
CFD Analysis of Thermal Processing of Eggs
-
Combined population balance and thermodynamic modelling of the batch top-spray fluidised bed coating process. Part I - Model development and validation
-
Combined population balance and thermodynamic modelling of the batch top-spray fluidised bed coating process. Part II - Model and process analysis
-
Numerical spray model of the fluidized bed coating process
-
The effect of covering material on the microclimate of rose plants in a greenhouse
-
Motorization and small vegetable farms in the Tunisian Sahel : performance and soil preparation costs
-
How to quantify microcapsule film coating quality
-
The use of a TRNSYS based dynamic greenhouse climate model to simulate the microclimate in a typical Zimbabwean greenhouse
-
Modelling spray drying losses in batch, top-spray fluidised bed coating processes
-
Computational fluid dynamics analysis for design optimisation of a continuous oven for convenience meat
-
Diffusion of radiation transmitted through dry and condensate covered transmitting materials
-
Actual state of former state and collective dairy cow houses in Romania
-
The aggressive environment's influence on envelope elements of dairy cows houses
-
Fluidised bed particle motion under a magnifying glass
-
Etude comparative de quatre niveaux de puissance de traction en travail du sol des petites exploitations maraîchères
-
Novel project on plasma based treatment of waste
-
Modelling the dynamic temperature and humidity distributions in fluidised bed coating processes
-
CFD analysis of the effect of self-regulating devices on the distribution of naturally supplied air
-
Model-based fuzzy controlled greenhouse cooling ventilation system
-
Modelling the dynamic two-dimensional temperature and humidity distributions in liquid-sprayed fluidised beds for coating processes
-
CFD analysis of heat transfer and microbial lethality during pasteurisation of intact eggs
-
Computational fluid dynamics analysis for process impact assessment during thermal pasteurization of intact eggs
-
Powder bed behavior during fluidized bed processing
-
Expanded bed height determination in a tapered fluidised bed reactor
-
Modelling ammonia volatilisation associated with liquid manure application
-
Modelling evaporative cooling in greenhouses under central Mexican conditions
-
A sensor for soil resistance measurement on the go
-
Modelling the coating process of particulate food materials in a batch fluidised bed
-
Voedingspoeders van een jasje voorzien
-
Integrated numerical spray model and event-driven monte carlo model of the fluidised bed coating process
-
Innovative waste treatment technologies
-
Visualisation of particle motion in tapered fluidised bed coating units
-
Stimulation of methanogenesis in a laboratory scale UASB reactor treating domestic sewage by Fe(0) application
-
Fluidised bed coating: a particle bed behaviour study
-
Combined thermodynamic and population balance model of the batch top-spray fluidised bed coating process of inert spheres
-
Arrangement of some dairy farms buildings in Transylvania
-
Computational fluid dynamics analysis of combined conductive and convective heat transfer in model eggs
-
CFD analysis of air distribution in fluidised bed equipment
-
- Journal Article
- A1
- open access
Modelling greenhouse temperature using system identification by means of neural networks
-
Monte Carlo simulation for top spray fluidised bed coating processes
-
Influence of the air distributor on air flow in a fluidised bed: comparison of CFD results with experiments
-
Measurements and simulation on the comfort of forklifts
-
Angular dependence of forward scattering induced by condensate on greenhouse cladding materials
-
Feasibility of low power machinery in the Tunisan Sahel region
-
Use of solar energy collectors for greenhouses in Mexico
-
Optimisation of sludge burnout
-
Food powder microencapsulation: principles, problems and opportunities
-
Determination of powder properties for gas-solid fluidisation
-
Thermodynamic model of the top spray fluidised bed coating process
-
CFD approach for modelling transient heat transfer during thermal processing of eggs
-
TRNSYS based modelling of a solar heating system for greenhouses in Mexico
-
Petite motorisation et exploitations maraîchères de taille limitée du Sahel tunisien. Partie 1: Etude diagnostique
-
Petite motorisation et exploitations maraîchères de taille limitée du Sahel tunisien. Partie 2: Evaluation sur le terrain des performances et des coûts de préparation du sol
-
CFD approach for modelling transient heat transfer and microbial inactivation during thermal processing of eggs
-
Optimisation of sewage sludge burnout
-
Low temperature heating of greenhouses under Western European winter conditions
-
Computational fluid dynamics in food, environmental and agricultural engineering
-
Feasibility of low power machinery on small horticultural enterprises in the Tunisian Sahel region
-
Sludge burnout optimisation
-
Development of a sensor for continuous soil resistance measurement
-
- Journal Article
- A1
- open access
Polycyclic aromatic hydrocarbons (PAHs) and estrogenic compounds in experimental flue gas streams
-
Electrochemical degradation of surfactants by intermediates of water discharge at carbon-based electrodes
-
Investigation of the permeability and selectivity of gases and volatile organic compounds for polydimethylsiloxane membranes
-
Modelling greenhouse temperature by means of auto regressive models
-
Combined CFD and experimental approach for determination of the surface heat transfer coefficient during thermal processing of eggs
-
Toepassing van alternatieve koel- en/of verwarmingssystemen bij azalea
-
Total and regular transmittances of dry and condensate covered transparent materials
-
A traction model for the optimisation of traction and slip distribution
-
Greenhouse climate control in Queretaro (Mexico).
-
CFD simulation of toluene removal in a membrane bioreactor.
-
Feasibility of lyophilization of wastewater sludge
-
Temperature and humidity profiles for process control in top spray fluidised bed coating processes.
-
Feasibility of low power machinery in the Tunisian Sahel region.
-
CFD modelling of air flow across the distributor plate in fluidised bed equipment
-
Quantitative and qualitative transmission properties of dry and condensate covered transparent materials
-
Assessment of the estrogenic activity of flue gases from burning processes by means of the yeast based human estrogen receptor (hER) bioassay
-
Computational fluid dynamics modelling of air flow in fluidised bed equipment
-
- Journal Article
- A1
- open access
Impact of water drops on the visible radiation transmittance of glazings under outside radiant conditions
-
PAR transmittances of dry and condensate covered glass and plastic greenhouse cladding.
-
Effect of inclination angle on the light transmittance of condensate covered homogeneous thin transparent materials.
-
Forward scattering induced by water drops on a transmissive substrate.
-
Individual wastewater treatment in Flanders (Belgium)
-
Screening for the presence of estrogenic compounds and polycyclic aromatic hydrocarbons in experimental flue gas matrices.
-
Daylighting properties measurement of dry and wet glazing materials.
-
Reduction of fossil fuel consumption for heating greenhouses
-
Comparative study of the transmissive properties of cladding materials in the photosynthetically active radiation spectrum
-
Modelling greenhouse temperature using ARMAX and ARX systems.
-
Alternatieve technieken voor het vorstvrij houden van azaleaserres : experimentele resultaten
-
Individual wastewater treatment in Flanders (Belgium)
-
Transmission properties of dry and wet greenhouse cladding materials and relation to crop photosynthesis
-
Studie van de invloed van temperatuurstrategieën d.m.v. alternatieve koel/verwarmingstechnieken, op de bloeikwaliteit van Azalea indica
-
Invloed van alternatieve koel/verwarmingstechnieken op de bloeikwaliteit van Azalea indica : stand van zake
-
Hoofdstuk 2: Serrebouw.
-
Modelling solar energy input in greenhouses.
-
Pig slurry drying potential in greenhouse
-
Greenhouse climate control using an earth-tube heat exchanger
-
Solar energy distrubution model for greenhouses.
-
Hoofdstuk 1: Warmte-, vocht-, en CO2-balans van een serre.
-
Bijlage 1: Begrippen van eenheden in de tuinbouwtechniek.
-
Solar radiation transmittances of dry and wet plastic film.
-
PAR availability and distribution in greenhouses.
-
Optical properties measurement of dry and wet transparent materials.
-
Design of an aerth tube heat exchanger system for greenhouses.
-
Condensation and radiation transmittance of greenhouse cladding materials: part 3: results for glass plates and plastic films
-
Condensation and radiation transmittance of greenhouse cladding materials: part 2: results for a complete condensation cycle
-
Wettability and high incidence angle light transmittance of greenhouse claddings.
-
PAR scattering by greenhouse covers and its effect on plant growth
-
PAR transmittance of dry and wet glass
-
PAR availability and distribution in greenhouses clad with partially wettable materials.
-
Applicability of absorbent gelling material to solar and wind drying of manure
-
Diffusive properties of dry and wet glass and plastics
-
Condensation and radiation transmittance of greenhouse cladding materials: Part 1, Laboratory measuring unit and performance.
-
Laboratory measurements of PAR transmittance of wet and dry greenhouse cladding materials.
-
Farm-scale membrane filtration of sow slurry.
-
Solar energy availability in greenhouses as affected by condensation on cladding materials.
-
Modelling solar energy input in greenhouses.
-
Bioluminescence and cometabolic degradation of toluene and trichloroethylene by Pseumomonas putida TVA8
-
Flushing system in pig breeding buildings
-
Effect of wettablity on PAR transmittance of cladding materials
-
Effect of latent heat phenomena on thermal insulation and inside climate of greenhouses
-
Reducing solid waste streams specific to soilless horticulture
-
De energievoorziening in een centraal verwarmd tuinbouwpark
-
Microbial oxidation and bioluminescence response for toluene and trichloroethylene.
-
Measuring facility for (shortwave) radiation transmission of condensation covered greenhouse claddings
-
Studies on radiometric, thermal and climatic properties of a new greenhouse covering material
-
Simulating the effect of condensation type on greenhouse shortwave radiation transmission and utilization
-
Feasibility of an electrical radiative heating system in greenhouses
-
Studies on radiometric, thermal and climatic properties of a new greenhouse covering material
-
Modelling the influence of condensation type on greenhouse light transmission
-
B iodegradation of toluene and trichloroethylene;
-
Influence of condensation and evaporation on the greenhouse climate and its regulation
-
Measuring facility for light transmittance and diffusion of condensation or rain covered glazing materials
-
Feasibility on an electrical radiative heating system in greenhouses