Show
Sort by
-
Mechanical behaviour of connections for cold-formed steel-glass shear wall panels
-
- Journal Article
- A2
- open access
Modal parameter identification and comfort assessment of GFRP lightweight footbridges in relation to human–structure interaction
-
Density-based topology optimization of structural components considering temperature-dependent thermal and mechanical material properties
-
Assessment of influential parameters in topology optimization of thermo-mechanically loaded concrete structures
-
Thermoelastic topology optimization of structural components at elevated temperatures considering transient heat conduction
-
- Journal Article
- A1
- open access
Fire resistance and associated failure modes of axially restrained hollow core slabs
-
- Journal Article
- A1
- open access
Extending 3D concrete printing to hard rock tunnel linings : adhesion of fresh cementitious materials for different surface inclinations
-
Flexural ductility of reinforced and prestressed concrete beams with maximum reinforcement ratios
-
- Journal Article
- A1
- open access
Capacity and failure modes of restrained hollow core slabs taking into account compressive membrane action
-
- Journal Article
- A1
- open access
Compliance-based topology optimization of structural components subjected to thermo-mechanical loading
-
- Conference Paper
- C1
- open access
Quantification of the effect of corrosion on the compressive membrane action in restrained hollow core slabs
-
- Journal Article
- A1
- open access
Experimental investigation of the loading rate effect and the sustained load effect in the concrete cone capacity of cast-in anchors
-
Propelling the widespread adoption of large-scale 3D printing
-
Fracture process zone development and length assessment under the mixed-mode I/II load analysed by digital image correlation technique
-
On the localisation of the FPZ under a pure mode II load identified by a hybrid method
-
- Conference Paper
- C3
- open access
Can hollow core slabs fail during the cooling phase of a fire? Numerical investigation of the burnout resistance of prestressed concrete hollow core slabs
-
FRP bridges in the Flanders region : experiences from the C-bridge project
-
The production of a topology-optimized 3D-printed concrete bridge
-
- Journal Article
- A1
- open access
Compressive membrane action in axially restrained hollow core slabs : experimental investigation
-
Influence of the stacking angle on the strength and stiffness properties of tiled laminates for civil applications : a DIC based approach
-
Distortion-induced fatigue behavior of vertical stiffener web gaps in steel girder bridges
-
Investigation of the pressure distributions around quasi-rectangular shield tunnels in soft soils with a shallow overburden : a field study
-
A comparative investigation between the beam spring method and the modified routine method in special-section shield tunnels : a case study for quasi-rectangular tunnels
(2022) INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS. 46(9). p.1754-1781 -
A comparison of the mechanical properties of curved box girders with corrugated steel webs to curved box girders with concrete webs
-
Failure modes of hollow core slabs taking into account compressive membrane action
-
- Conference Paper
- C1
- open access
Structural reliability of hollow core slabs considering compressive membrane action
-
- Journal Article
- A1
- open access
FRP bridges in the Flanders region : experiences from the C-bridge project
-
- Conference Paper
- C3
- open access
Topology optimization of building structures in fire
-
- Conference Paper
- C1
- open access
Different approaches for topology optimization of building structures subjected to thermo-mechanical loads due to fire
-
- Journal Article
- A1
- open access
Measured dynamic properties of web-core sandwich panel FRP composite footbridges and their relation to pedestrian comfort analysis
-
- Journal Article
- A1
- open access
Influence of SLS design requirements on the material consumption and self-weight of web-core sandwich panel FRP composite footbridges
-
A parametric modelling strategy for the numerical simulation of 3D concrete printing with complex geometries
-
- Conference Paper
- C1
- open access
Strategies for numerical simulation of 3D concrete printing : voxel-based versus extrusion-based meshing
-
VoxelPrint : a grasshopper plug-in for voxel-based numerical simulation of concrete printing
-
- Conference Paper
- C1
- open access
Load bearing capacity of prestressed concrete hollow core slabs taking into account tensile membrane action
-
- Journal Article
- A1
- open access
Optimization study on longitudinal joints in quasi-rectangular shield tunnels
-
Optimization study on the rotation-resistance performance of longitudinal joints in quasi-rectangular segmental tunnel linings
-
- Journal Article
- A1
- open access
Burnout resistance of concrete slabs : probabilistic assessment and global resistance factor calibration
-
Comparison of steel strength retention models for fire exposed concrete slabs
-
- Journal Article
- A1
- open access
Adhesion properties of printable polymer-modified concrete for rock tunnel linings
-
Design optimization for 3D concrete printing : improving structural and thermal performances
-
- Conference Paper
- C3
- open access
3D-printed concrete bridge designed by topology optimization
-
- Conference Paper
- C1
- open access
Global Resistance Factor for the burnout resistance of concrete slabs exposed to parametric fires
-
Calibration of hyperelastic material models for structural silicone and hybrid polymer adhesives for the application of bonded glass
-
- Journal Article
- A1
- open access
Design of anchorage zones of pretensioned concrete girders : a comparison of nonlinear 3D FEM results with measurements on a full scale beam
-
Influence of rotational stiffness modeling on the joint behavior of quasi-rectangular shield tunnel linings
-
A comparison of the fracture behaviour of various concrete grades under mixed mode I/II loading
-
- Conference Paper
- C1
- open access
DIC measurement of the full strain field in a tiled laminate to determine local and global stiffness properties
-
3D printing of a post-tensioned concrete girder designed by topology optimization
-
- Conference Paper
- C1
- open access
FEM modelling techniques for simulation of 3D concrete printing