Show
Sort by
-
Thermo-catalytic depolymerization of lignin over Pd-based catalysts : role of catalyst support on monoaromatics selectivity
-
- Journal Article
- A1
- open access
Enhancing stability of γ-Al2O3-supported NiCu catalysts by impregnating basic oxides in the hydrodeoxygenation of anisole
-
Coke formation and mineral accumulation on HZSM-5/Al2O3 catalysts during in-situ catalytic fast pyrolysis of microalgae over multiple regeneration cycles
-
Pd catalysts in the mild reductive depolymerization of Soda lignin : support and Cu addition effects
-
- Journal Article
- A1
- open access
Prediction of instantaneous yield of bio-oil in fluidized biomass pyrolysis using long short-term memory network based on computational fluid dynamics data
-
- Journal Article
- A1
- open access
Maximizing the production of high-value chemicals via fast-pyrolysis of lignin-engineered poplars : impact of cinnamyl alcohol dehydrogenase 1 (hpCAD) downregulation
-
- Journal Article
- A1
- open access
Ab initio group additive values for thermodynamic carbenium ion property prediction
-
- Miscellaneous
- open access
Co-processing of biocrudes in oil refineries
-
- Journal Article
- A1
- open access
High phenol yields from catalytic hydropyrolysis of lignin and phenolic-rich raffinate
-
- Journal Article
- A1
- open access
The effect of citric acid pretreatment on composition and stability of bio-oil from sugar cane residues using a continuous lab-scale pyrolysis reactor
-
- Journal Article
- A1
- open access
Impact of oxygen vacancies in Ni supported mixed oxide catalysts on anisole hydrodeoxygenation
-
Effects of demineralization on the composition of microalgae pyrolysis volatiles in py-GC–MS
-
Co-liquefaction of mixed biomass feedstocks for bio-oil production : a critical review
-
- Journal Article
- A1
- open access
Detailed characterization of sulfur compounds in fast pyrolysis bio-oils using GC × GC-SCD and GC–MS
-
- Journal Article
- A1
- open access
Biomass fast pyrolysis in an innovative gas-solid vortex reactor : experimental proof of concept
-
- Journal Article
- A1
- open access
Catalytic fast pyrolysis of biomass : catalyst characterization reveals the feed-dependent deactivation of a technical ZSM-5-based catalyst
-
Structural and chemical changes of sludge derived pyrolysis char prepared under different process temperatures
-
Fast pyrolysis of raw and acid-leached sugarcane residues en route to producing chemicals and fuels : economic and environmental assessments
-
The pyrolysis of oak with polyethylene, polypropylene and polystyrene using fixed bed and stirred reactors and TGA instrument
-
- Journal Article
- A1
- open access
Primary thermal decomposition pathways of hydroxycinnamaldehydes
-
Recycling of product gas does not affect fast pyrolysis oil yield and composition
-
Fast pyrolysis with fractional condensation of lignin-rich digested stillage from second-generation bioethanol production
-
- Journal Article
- A1
- open access
Detailed analysis of sewage sludge pyrolysis gas : effect of pyrolysis temperature
-
- Journal Article
- A1
- open access
Co-gasification of oil palm biomass in a pilot scale downdraft gasifier
-
Improving fast pyrolysis of lignin using three additives with different modes of action
-
Ex situ catalytic fast pyrolysis of lignin-rich digested stillage over Na/ZSM-5, H/ZSM-5, and Fe/ZSM-5
-
Hydrotreatment of pyrolysis liquids derived from second-generation bioethanol production residues over NiMo and CoMo catalysts
-
NiCuMo-SiO2 catalyst for pyrolysis oil upgrading: model acidic treatment study
-
Influence of citric acid leaching on the yield and quality of pyrolytic bio-oils from sugarcane residues
-
Critical evaluation of oil palm fresh fruit bunch solid wastes as soil amendments : prospects and challenges
-
Molecular characterization and atomistic model of biocrude oils from hydrothermal liquefaction of microalgae
-
Catalytic upgrading of biomass-derived vapors on carbon aerogel-supported Ni : effect of temperature, metal cluster size and catalyst-to-biomass ratio
-
Fast pyrolysis oil stabilization kinetics over a Ni-Cu catalyst using propionic acid as a model compound
-
Application of Py-GC/MS coupled with PARAFAC2 and PLS-DA to study fast pyrolysis of genetically engineered poplars
-
- Journal Article
- A1
- open access
Effect of composition and preparation of supported MoO3 catalysts for anisole hydrodeoxygenation
-
Design and cold flow testing of a Gas-Solid Vortex Reactor demonstration unit for biomass fast pyrolysis
-
Anisole hydrotreatment kinetics on CoMo catalyst in the absence of sulfur : experimental investigation and model construction
-
Hydrodeoxygenation of phenolics in liquid phase over supported MoO3 and carburized analogues
-
In situ catalytic fast pyrolysis of crude and torrefied Eucalyptus globulus using carbon aerogel-supported catalysts
-
In situ performance of various metal doped catalysts in micro-pyrolysis and continuous fast pyrolysis
-
Finite element modeling of intraparticle heterogeneous tar conversion during pyrolysis of woody biomass particles
-
Quantitative analysis of nitrogen containing compounds in microalgae based bio-oils using comprehensive two-dimensional gas-chromatography coupled to nitrogen chemiluminescence detector and time of flight mass spectrometer
-
Heterogeneous catalytic upgrading of biocrude oil produced by hydrothermal liquefaction of microalgae: state of the art and own experiments
-
Potential of genetically engineered hybrid poplar for pyrolytic production of bio-based phenolic compounds
-
Suitability of hydrothermal liquefaction as a conversion route to produce biofuels from macroalgae
-
Reductive lignocellulose fractionation into soluble lignin-derived phenolic monomers and dimers and processable carbohydrate pulps
-
Effect of sequential catalyst regeneration in catalytic fast pyrolysis of biomass
-
Hydrothermal liquefaction (HTL) of microalgae for biofuel production: state of the art review and future prospects
-
Validation of a new set-up for continuous catalytic fast pyrolysis of biomass coupled with vapour phase upgrading
-
Low-cost small scale processing technologies for production applications in various environments : mass produced factories