1 – 250 of 34806
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=""
width=""
height=""
allowtransparency="true"
frameborder="0">
</iframe>
- 2018
- Municipal wastewater effluent characterization and variability analysis in view of an ozone dose control strategy during tertiary treatment : the status in Belgium
- Key parameters for size- and shape-controlled synthesis of vaterite particles
- Assessment of numerical simulation capabilities of the fire dynamics simulator (FDS 6) for planar air curtain flows
- Evaluation of natural quartz and zeolitic tuffs for As(V) removal from aqueous solutions : a mechanistic approach
- A quasi-dimensional combustion model for spark ignition engines fueled with gasoline–methanol blends
- Classification of uncoated plywood based on moisture dynamics
- Electrically assisted bandedge mode selection of photonic crystal lasing in chiral nematic liquid crystals
- Towards innovative technologies for nutrient recovery from human urine
- On the array configuration and accuracy of remote in-ear level sensing for in-vehicle noise control applications
- Extension and application on a pool-type test facility of a system thermal-hydraulic/CFD coupling method for transient flow analyses
- A study of the heat transfer in low temperature combustion engines
- Numerical investigation of large-scale vortices in an array of cylinders in axial flow
- SmartLife smart clothing gamification to promote energy-related behaviours among adolescents
- Data Backups to Cloud: A queueing model with Batch Service
- Closed-loop lumped parameter modelling of hemodynamics during cirrhogenesis in rats
- Experimental study of corner fires : part I : Inert panel tests
- Exploring the potential of electromagnetic surface measurements for the characterisation of industrial landfills
- Neural network Hilbert transform based filtered backprojection for fast inline x-ray inspection
- ParaFPGA 2017 : enlarging the scope of parallel programming with FPGAs
- Heat resistance of biobased materials, evaluation and effect of processing techniques and additives
- Effect of the anode potential on the physiology and proteome of Shewanella oneidensis MR-1
- The development of a continuous and controlled freeze-drying concept for biopharmaceutical unit doses
- Isogeometric analysis of functionally graded carbon nanotube reinforced composite nanoplates using modified couple stress theory
- Proceedings of the international conference on advances in computational mechanics 2017
- Discovering activity patterns in office environment using a network of low-resolution visual sensors
- The next step towards usable microbial bioelectrochemical sensors?
- Aerosol-Jet Printed Interconnects for 2.5 D Electronic and Photonic Integration
- Experimental Characterization and Finite Element Modelling of Strain-rate Dependent Hyperelastic Properties of PVB Interlayers
- Analytical modeling and preliminary fractional order velocity control of a small scale submersible
- Representativeness and repeatability of microenvironmental personal and head exposures to radio-frequency electromagnetic fields
- TV white space and LTE network optimization toward energy efficiency in suburban and rural scenarios
- Improving the surface properties of an UHMWPE shoulder implant with an atmospheric pressure plasma jet
- Development and validation of an in-line NIR spectroscopic method for continuous blend potency determination in the feed frame of a tablet press
- The development of an autonomous navigation system with optimal control of an UAV in partly unknown indoor environment
- Coupled eighth-mode substrate integrated waveguide antenna: small and wideband with high-body antenna isolation
- Applying a biodeposition layer to increase the bond of a repair mortar on a mortar substrate
- Research from across the life-cycle of glass
- Brain tumour segmentation on contrast enhanced T1w MRI using local texture and Random Forests
- Intelligent TDMA heuristic scheduling by taking into account physical layer interference for an industrial IoT environment
- Evaluation of vis-NIR reflectance spectroscopy sensitivity to weathering for enhanced assessment of oil contaminated soils
- An efficient genetic algorithm for large-scale transmit power control of dense and robust wireless networks in harsh industrial environments
- Adsorptive and freezing technologies for water purification
- A biomechanical analysis of shear wave elastography in pediatric heart models
- The Impact of Forecasting Accuracy on Stochastic Periodic Inventory Routing Problem
- The design of a composite folding bike to improve the user experience of commuters
- Surface treatment of PEOT/PBT (55/45) with a dielectric barrier discharge in air, helium, argon and nitrogen at medium pressure
- Elastic-plastic interaction between adjacent pipeline girth weld defects
- Characterization of crack growth in heterogeneous welds using single edge notched tension (SE(T)) specimens
- Poly(methyl methacrylate) capsules as an alternative to the 'proof-of-concept' glass capsules used in self-healing concrete
- Closed-form BER expression for OFDM with the effect of TI-ADC’s timing mismatch
- Design and Implementation of a Real-Time Autonomous Navigation System Applied to Lego Robots
- Indoor ultra-wideband channel modeling and localization using multipath estimation algorithms
- Experimental Techniques Synergy towards the Design of a Sensing Tool for Autonomously Healed Concrete
- Non-linear 3D finite element analysis of the anchorage zones of pretensioned concrete girders and experimental verification
- Exploration of continuous flow strategies for the synthesis of industrially relevant building blocks
- Integration of methane removal in aerobic anammox-based granular sludge reactors
- Light-induced multi-wavelength lasing in dye-doped chiral nematic liquid crystals due to strong pumping illumination
- Target confinement in small reaction volumes using microfluidic technologies : a smart approach for single-entity detection and analysis
- Content-aware contrast ratio measure for images
- A multilevel calculation scheme for risk-based robustness quantification of reinforced concrete frames
- Redundancy-based service life assessment of corroded reinforced concrete elements considering parameter uncertainties
- Development and evaluation of land use regression models for black carbon based on bicycle and pedestrian measurements in the urban environment
- Techno-economic assessment of surrogate-based real-time control and monitoring of secondary effluent ozonation at pilot scale
- Biofiltration of hexane, acetone and dimethyl sulphide using wood, compost and silicone foam
- Unsupervised Classification of Multilook Polarimetric SAR Data Using Spatially Variant Wishart Mixture Model with Double Constraints
- Technology for future and ageing pipelines conference : proceedings
- Pulsed Eddy Current Applied to Measure Residual Stress in Welding
- Incorporating macroeconomic leading indicators in tactical capacity planning
- Targeted poly(3-hydroxybutyrate-co-3-hydroxyvalerate) bioplastic production from carbon dioxide
- Functional connectivity changes during epileptogenesis : a longitudinal rs-fMRI study
- Posthuman desire in robotics and science fiction
- SICA : subjectively interesting component analysis
- Study on the Smoke Sealing Effectiveness of an Air Curtain in a Tunnel Configuration
- Information feedback loop for improved pedestrian detection in an autonomous perception system
- Hybrid Schedule Management in 6TiSCH Networks: The Coexistence of Determinism and Flexibility
- Analysis of the Scalability of UWB Indoor Localization Solutions for High User Densities
- Electric cars compared to ultra-light electric vehicles and global warming
- AN IMPROVED SIC-MOSFET GATE DRIVER CIRCUIT CONTROLLED BY DSPIC33FJ256GP710A
- Flow regime based heat transfer correlation for R245fa in a 3 mm tube
- Thin and flexible polymer photonic sensor foils for monitoring composite structures
- Assessment of long-term spatio-temporal radiofrequency electromagnetic field exposure
- Remote Procedure Call compiler for Field-Programmable Gate Arrays
- The use of municipal solid waste incineration ash in various building materials : a Belgian point of view
- The removal of fluoride from aqueous solution by a lateritic soil adsorption : kinetic and equilibrium studies
- Inline multi-material identification via dual energy radiographic measurements
- Assessing the ecological relevance of organic discharge limits for constructed wetlands by means of a model-based analysis
- A closer look on spatiotemporal variations of dissolved oxygen in waste stabilization ponds using mixed models
- Buckling design of axially compressed steel silos on local supports
- Protecting operating room schedules against emergency surgeries: outlook on new stochastic optimization tools
- Pinpointing wastewater and process parameters controlling the AOB to NOB activity ratio in sewage treatment plants
- Effect of citric acid leaching on the demineralization and thermal degradation behavior of sugarcane trash and bagasse
- Multi-electrode tunable liquid crystal lenses with one lithography step
- Optimization and experimental validation of stiff porous phononic plates for widest complete bandgap of mixed fundamental guided wave modes
- Towards computer aided diagnosis of primary brain tumors : a radiomics approach
- N2O emissions and aeration efficiency in wastewater treatment : improved monitoring, mechanistic modelling and data mining
- Benchmark Challenge : a robust fractional order control autotuner for the refrigeration systems based on vapor compression
- ODYSC : a responsive educational web app for dynamics and control
- An analysis of dynamic lighting control in landscape offices
- Regelmaat tram en bus belangrijker dan snelheid
- Calibration of hardness transfer functions based on micro tensile and all weld metal tensile tests of heterogeneous welds
- TDoA-based outdoor positioning with tracking algorithm in a public LoRa network
- Physical-chemical treatment of landfill leachate : technological performance, spectral characterization and cost estimations
- Atomic layer deposition for interface engineering of (thin-film) lithium-ion battery
- Selective cell response on natural polymer bio-interfaces textured by femtosecond laser
- Autonomous navigation strategies for UGVs/UAVs
- Radiofrequency exposure assessment of baby surveillance devices in the frequency range 400MHz-2.45GHz
- Mechanistic insights and operational strategies for mainstream partial nitritation/anammox
- Stress-strain synchronization for high strain rate tests on brittle composites
- Machine learning based brain tumour segmentation on limited data using local texture and abnormality
- PID control of a three phase photovoltaic inverter tied to a grid based on a 120-degree bus Clamp PWM
- A pulse frequency modulation interpretation of VCOs enabling VCO-ADC architectures with extended noise shaping
- Catalyst-assisted chemical looping auto-thermal dry reforming : spatial structuring effects on process efficiency
- Das neue fib Bulletin 80 : Teilsicherheitsbeiwerte für die Nachrechnung bestehender Massivbauwerke
- An information system design theory for the comparative judgement of competences
- Solvent-induced self-assembly of uniform lying helix alignment of the cholesteric liquid crystal phase for the flexoelectro-optic effect
- Fusion of pixel and object-based features for weed mapping using unmanned aerial vehicle imagery
- From lab to market : an integrated bioprocess design approach for new-to-nature biosurfactants produced by Starmerella bombicola
- Modeling superscalar processor memory-level parallelism
- Clear to clear laser welding for joining thermoplastic polymers : a comparative study based on physicochemical characterization
- A compact fourth-order in space energy-preserving method for Riesz space-fractional nonlinear wave equations
- Cofactor F430 as a biomarker for methanogenic activity : application to an anaerobic bioreactor system
- Beyond temporal pooling : recurrence and temporal convolutions for gesture recognition in video
- Renewable energy generation potential from biomass resources in Guilan Province
- Testing superabsorbent polymer (SAP) sorption properties prior to implementation in concrete : results of a RILEM Round-Robin Test
- Classification method to define synchronization capability limits of line-start permanent-magnet motor using mesh-based magnetic equivalent circuit computation results
- Load bearing capacity of corroded girth welds in vintage pipelines below the ductile-to-brittle transition temperature
- Influence of material heterogeneity on the strain capacity of pipelines : part 2 : full-scale bending test
- Bio-electrochemical pre-treatment and membrane aeration to intensify full nitrogen recovery for Spaceflight urine nitrification
- Breadboard verification of a novel technology train to recycle nutrients and water from urine for human spaceflight
- Fractional Order PI Autotuning Method Applied to Multi-Agent System
- Experimental investigation of strain capacity of pipelines with heterogeneous strength properties
- Evaluation of existing heat transfer correlations in designing helical coil evaporators for low-temperature organic rankine cycles via inverse design approach
- Optical Infrared Thermography of CFRP with Artificial Defects: Performance of Various Post-Processing Techniques
- Accounting for energy cost when designing energy-efficient wireless access networks
- Electromagnetic radiation efficiency of body-implanted devices
- Carbon and nitrogen recovery by hydrothermal oxidation
- Prediction of mechanical properties of knitted fabrics under tensile and shear loading : mesoscale analysis using representative unit cells and its validation
- Calculation methods of glass parapets in aluminium clamping profiles
- Detailed structural and electrical characterization of plated crystalline silicon solar cells
- A micropatterned multielectrode shell for 3D spatiotemporal recording from live cells
- Analytical and Calculation DC-Link Capacitor of a Three-Phase Grid-Tied Photovoltaic Inverter
- Reliability analysis of FRP strengthened RC beams considering compressive membrane action
- Mix design factors of self-consolidating cement paste affecting the magnitude of variations in rheological properties induced by the addition time of PCE-superplasticizer
- Buckling design of axially compressed steel silos on discrete supports
- Effects of particle characteristics on the behavior of calcareous sand
- Backtracking radioxenon in Europe using Ensemble transport and dispersion modelling
- Validating sound propagation predictions with increasing complexity near multi-lane roads
- Developing fragility curves and estimating failure probabilities for protected steel structural elements subject to fully developed fires
- Combining ozone with UV and H2O2 for the degradation of micropollutants from different origins: lab-scale analysis and optimization
- Decades without a real grid: a living experience in Iraq
- Derivation and application of a reliable procedure to computationally model the mechanical stability of rigid and flexible metal-organic frameworks
- Improving formaldehyde consumption drives methanol assimilation in engineered E. coli
- Impact of plastic deformation on retention under pure D or He high flux plasma expose
- Anaerobic treatment of raw domestic wastewater in a UASB-digester at 10 °C and microbial community dynamics
- Resource efficiency evaluation of the introduction of resource recovery technologies in the bio-based economy
- 125 Gbit/s discretely tunable InP-on-silicon filtered feedback laser with sub-nanosecond wavelength switching times
- GEOTABS concept and design: state-of-the-art, challenges and solutions
- hybridGEOTABS project - MPC for controlling the power of the ground by integration
- Optimizing storage capacity of retailers in stochastic periodic inventory routing problem
- Experimental evaluation of UWB indoor positioning for sport postures
- Stability analysis of a partitioned iterative method for steady free surface flow
- Sulfur-based denitrification treating regeneration water from ion exchange at high performance and low cost
- A trajectory-based sampling strategy for sequentially refined metamodel management of metamodel-based dynamic optimization in mechatronics
- Extension of the QuickFF force field protocol for an improved accuracy of structural, vibrational, mechanical and thermal properties of metal-organic frameworks
- Anode materials for sulfide oxidation In alkaline wastewater : an activity and stability performance comparison
- Blast response of RC slabs with externally bonded reinforcement : experimental and analytical verification
- A perfect match : anaerobic digestion and pyrolysis from agricultural residues
- Anaerobic treatment of blended sugar industry and ethanol distillery wastewater through biphasic high rate reactor
- Cold anammox for energy-positive sewage treatment : impact of temperature and organic carbon on performance and microbiota
- A semi-linear delayed diffusion-wave system with distributed order in time
- Influence of the temperature on energy management in battery-ultracapacitor electric vehicles
- Downsizing potential of methanol fueled DISI engine with variable valve timing and boost control
- Growth and current production of mixed culture anodic biofilms remain unaffected by sub-microscale surface roughness
- Co-creating real-life experiences through the dialectic of system thinking and design
- Polarizer-free light steering using dual-frequency cholesteric texture liquid crystal mode
- Continuous nitrification of artificial urine with a bacterial co-culture in a packed-bed bioreactor
- Pipeline integrity management system
- An in silico framework to analyze the anisotropic shear wave mechanics in cardiac shear wave elastography
- Stability of illicit drugs as biomarkers in sewers : from lab to reality
- Metal recovery by microbial electro-metallurgy
- Efficient disturbance rejection for dead-time processes using internal model control
- Exposure of insects to radio-frequency electromagnetic fields from 2 to 120 GHz
- PdZn nanoparticle catalyst formation for ethanol dehydrogenation : active metal impregnation vs incorporation
- Statistically-Based Comparison of the Removal Efficiencies and Resilience Capacities between Conventional and Natural Wastewater Treatment Systems: A Peak Load Scenario
- Valorisation on municipal solid waste incineration residues in concrete products
- Bi-articular knee-ankle-foot exoskeleton produces higher metabolic cost reduction than weight-matched mono-articular exoskeleton
- A comparison of the full and half toroidal continuously variable transmissions in terms of dynamics of ratio variation and efficiency
- Evaluation of display conditions of the Ghent altarpiece at St. Bavo Cathedral
- Characterisation of microstructural alterations in a weight drop mTBI rat model : a longitudinal diffusion MRI and histological analysis
- A Procedure for the Extraction of Intrinsic AC Conductivity and Dielectric Constant of N87 Mn-Zn Ferrite Samples Based on Impedance Measurements and Equivalent Electrical Circuit Modeling
- Preface
- Rapid removal of ammonium from domestic wastewater using polymer hydrogels
- Skeletonization method for vessel delineation of arteriovenous malformation
- Evaluation of post-consumer mixed polyolefines and their injection moulded blends with virgin polyethylene
- Efficiency assessment of hybrid coatings for natural building stones : advanced and multi-scale laboratory investigation
- Processing Crowdsourced Data for the Analysis of Mobility Behaviour
- High-throughput design and analysis of modular endolysins to develop lead candidates using VersaTile Shuffling
- Energy-aware evolutionary optimization for cyber-physical systems in Industry 4.0
- Mechanical properties of continuous adhesive glass-steel connections under monotonic and cyclic loading
- Analytical pyrolysis of biochar to predict the stability of biochar
- Plasma dye coating as straightforward and widely applicable procedure for dye immobilization on polymeric materials
- Electromagnetic modelling and optimization for SPECT-MRI and auricular vagus nerve stimulation
- Preventive conservation of works of art in historic buildings : assessment and modelling
- More glass; more challenges!
- Experimental investigation into the effects of membrane action for continuous reinforced glass beam systems
- Light-Weight Integration and Interoperation of Localization Systems in IoT
- Hyperstatische gewapende glazen liggers
- Removal of alachlor, diuron and isoproturon in water in a falling film dielectric barrier discharge (DBD) reactor combined with adsorption on activated carbon textile : reaction mechanisms and oxidation by-products
- Infrastructuur voor voetgangers krijgt te weinig aandacht
- Nitrogen recovery from urine in Space : a case for nitrification
- Nitrogen cycling in regenerative life support systems : challenges for waste refinery and food production processes
- Understanding mental workload : from a clarifying concept analysis toward an implementable framework
- Improved sulfide mitigation in sewers through on-line control of ferrous salt dosing
- Fate and distribution of film forming and alkalizing amines in steam-water cycles
- Thermal profile construction for energy-intensive industrial sectors
- Machine learning based error detection in transient susceptibility tests
- A Robust PID Autotuning Method for Steam/Water Loop in Large Scale Ships
- Towards Improving Adaptability of Capability Driven Development Methodology in Complex Environment
- Towards a more effective and reliable salt crystallization test for porous building materials : state of the art
- Analysis of age of data in data backup services
- Deep transcranial magnetic stimulation: improved coil design and assessment of the induced fields using MIDA model
- Physical-chemical treatment of rainwater runoff in recovery and recycling companies : lab-scale investigation
- The patient benefit and environmental burden of pharmaceutical treatments : a comprehensive assessment of Human Health
- Comparison between collective coordinate models for domain wall motion in PMA nanostrips in the presence of the Dzyaloshinskii-Moriya interaction
- On negative rejection of uncharged organic solutes in forward osmosis
- Practical considerations of the FTT device for fabric comfort evaluation
- Development of crystalline morphology and its relationship with mechanical properties of PP/PET microfibrillar composites containing POE and POE-g-MA
- Individual-based modelling of invasion in bioaugmented sand filter communities
- Experimental study of corner fires : part II : flame spread over MDF panels
- An efficient genetic algorithm for large-scale planning of dense and robust industrial wireless networks
- X-ray radiography to visualize the rebar-cementitious matrix interface and judge the delay in corrosion through self-repair by encapsulated polyurethane
- Recommendation of RILEM TC 238-SCM : determination of the degree of reaction of siliceous fly ash and slag in hydrated cement paste by the selective dissolution method
- Vegetable fermentation and pickling
- Talk: High throughput generation of designer enzybiotics against Acinetobacter baumannii
- Solving the Integrated Production and Imperfect Preventive Maintenance Planning Problem
- Channel estimation for massive MIMO TDD systems assuming pilot contamination and flat fading
- Rapid prediction of total petroleum hydrocarbons concentration in contaminated soil using vis-NIR spectroscopy and regression techniques
- A multi-band body-worn distributed radio-frequency exposure meter : design, on-body calibration and study of body morphology
- Understanding photocatalytic activity of MOFs : a combined experimental and theoretical study
- The Impact of Disasters on the Performance of Discrete-time GI-GI-1 Queue
- Electrochemical impedance analysis of a PEDOT:PSS-based textile energy storage device
- From light rays to 3D models
- Microbial community dynamics reflect reactor stability during the anaerobic digestion of a very high strength and sulfate-rich vinasse
- Enrichment and adaptation yield high anammox conversion rates under low temperatures
- Experimental results of a small-scale organic Rankine cycle: Steady state identification and application to off-design model validation
- Peculiarities of spatial soliton formation in azobenzene liquid crystal
- Towards in-plane local defect resonance for non-destructive testing of polymers and composites
- PID based particle swarm optimization in offices light control
- Increasing exhaust temperature to enable after-treatment operation on a two-stage turbo-charged medium speed marine diesel engine
- The reflection of evolving bearing faults in the stator current’s extended park vector approach for induction machines