Show
Sort by
-
Optimizing the shield tunnel backfilling grouts with supplementary cementitious materials by response surface methodology
-
Adhesion evaluation and interface characterization of 3D printed concrete for automatic repair
-
- Journal Article
- A1
- open access
Numerical study on the behavior of polypropylene fiber reinforced concrete subjected to moderate temperature variations using LDPM theory
-
Towards a more sustainable construction industry : bridging the gap between technical progress and commercialization of self-healing concrete
-
- Journal Article
- A1
- open access
Influence of premixed chlorine salt on the pore characteristics of 2 cement-based hardened grout containing a large amount of bentonite
-
- Journal Article
- A1
- open access
Mortar cure-dependent effects on adhesive anchor systems loaded in tension
-
The influence of material characteristics and environmental circumstances on the efficiency of water repellent treatments of historic facades
-
Comparison of printability and mechanical properties of rigid and flexible fiber-reinforced 3D printed cement-based materials
-
- Journal Article
- A1
- open access
Alkali activated lightweight aggregate as bacterial carrier in manufacturing self-healing mortar
-
Set-on-demand of alkali-activated slag mixture using twin-pipe pumping
-
Influence of rheology on mixing homogeneity and mechanical behavior of twin-pipe 3D printable concrete
-
Relationship between sorptivity coefficients of concrete as calculated from the evolution of water uptake versus t0.5 or t0.25
-
Assessment of interfacial fracture of asphalt mortar-aggregate system at low temperature : a study based on four-point bending test of sandwich beams
-
- Journal Article
- A1
- open access
Magneto-responsive structural build-up of highly flowable cementitious paste in the presence of PCE superplasticizer
-
A review : reaction mechanism and strength of slag and fly ash-based alkali-activated materials
-
Cracking behavior of ultra-high strength mortar with CaO-based expansive agent and superabsorbent polymer
-
- Journal Article
- A1
- open access
Combining X-ray CT and DIC to understand the bending strength of OSB
-
Influence of sustained compressive load on the carbonation of concrete containing blast furnace slag
-
Numerical modeling of the carbonation depth of meso-scale concrete under sustained loads considering stress state and damage
-
Durability of concrete bearing polymer-treated mixed recycled aggregate
-
- Journal Article
- A1
- open access
Experimental study of compression-tension asymmetry in asphalt matrix under quasi-static and dynamic loads via an integrated DMA-based approach
-
Early age hydration, rheology and pumping characteristics of CSA cement-based 3D printable concrete
-
The improvement of freezing-thawing resistance of concrete by cellulose/polyvinyl alcohol hydrogel
-
- Journal Article
- A1
- open access
Active stiffening control by magnetically induced blocking in confined flow of fly ash pastes
-
- Journal Article
- A1
- open access
Experimental research on salt contamination procedures and methods for assessment of the salt distribution
-
A critical review of the resulting effective water-to-cement ratio of fine recycled aggregate concrete
-
Mechanical and microstructural properties of recycled concretes mixed with ceramic recycled cement and secondary recycled aggregates : a viable option for future concrete
-
- Journal Article
- A1
- open access
Enhanced durability performance of cracked and uncracked concrete by means of smart in-house developed superabsorbent polymers with alkali-stable and -unstable crosslinkers
-
Effect of ultrashort laser-induced surface flaws on architectural glass strength
-
Determination of specific surface area of irregular aggregate by random sectioning and its comparison with conventional methods
-
The influence of superabsorbent polymers (SAPs) on autogenous shrinkage in cement paste, mortar and concrete
-
- Journal Article
- A1
- open access
Possibilities of fly ash as responsive additive in magneto-rheology control of cementitious materials
-
A lattice discrete particle model to simulate the viscoelastic behaviour of macro - synthetic fibre reinforced concrete
-
Combined use of superabsorbent polymers and nanosilica for reduction of restrained shrinkage and strength compensation in cementitious mortars
-
- Journal Article
- A1
- open access
Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers
-
- Journal Article
- A1
- open access
Crack propagation and microwave healing of Ferrite-filled asphalt mixes based on image correlation observations
-
Bond strength between concrete and repair mortar and its relation with concrete removal techniques and substrate composition
-
Pre-treatment and utilisation of municipal solid waste incineration bottom ashes towards a circular economy
-
Assessment of the potential of superabsorbent polymers as internal curing agents in concrete by means of optical fiber sensors
-
Influence of water to binder ratio on the rheology and structural build-up of alkali-activated slag/fly ash mixtures
-
Rheological and hydration behaviour of cement pastes containing porcelain polishing residue and different water-reducing admixtures
-
In-situ crosslinking of superabsorbent polymers as external curing layer compared to internal curing to mitigate plastic shrinkage
-
The effect of NaOH concentration on the mechanical and physical properties of alkali activated fly ash-based artificial lightweight aggregate
-
The impact of slag fineness on the reactivity of blended cements with high-volume non-ferrous metallurgy slag
-
Understanding the mechanical performance of OSB in compression tests
-
Sealing efficiency of cement-based materials containing extruded cementitious capsules
-
The role of ink-bottle pores in freeze-thaw damage of oolithic limestone
-
Calibration of hyperelastic material models for structural silicone and hybrid polymer adhesives for the application of bonded glass
-
Effect of magnetized mixing water on the fresh and hardened state properties of steel fibre reinforced self-compacting concrete
-
Carbonation of concrete with construction and demolition waste based recycled aggregates and cement with recycled content
-
Freeze-thaw resistance of concrete containing mixed aggregate and construction and demolition waste-additioned cement in water and de-icing salts
-
Neutron radiography to study the water ingress via the interlayer of 3D printed cementitious materials for continuous layering
-
AC impedance spectroscopy characteristics of chloride-exposed cement pastes
-
Investigation on influential factors on chloride concentration index of cement-based materials by pore solution expression method
-
Experimental investigation on the behavior of fine-grained soils containing waste rubber tires under repeated and static loading using direct shear apparatus
-
Using statistical analysis and laboratory testing to evaluate the effect of magnetized water on the stability of foaming agents and foam concrete
-
A study on the chloride diffusion behavior of blended cement concrete in relation to aggregate and ITZ
-
Influence of nano-clay on rheology, fresh properties, heat of hydration and strength of cement-based mortars
-
Multi-level diffusion model for manufactured sand mortar considering particle shape and limestone powder effects
-
Utilization of miscanthus combustion ash as internal curing agent in cement-based materials : effect on autogenous shrinkage
-
Investigation on the potential utilization of zeolite as an internal curing agent for autogenous shrinkage mitigation and the effect of modification
-
Lattice discrete particle modeling of concrete coupled creep and shrinkage behavior : a comprehensive calibration and validation study
-
Concrete fracture toughness increase by embedding self-healing capsules using an integrated experimental approach
-
Time-dependent rheological behavior of cementitious paste under continuous shear mixing
-
Influence of Sporasarcina pasteurii cells on rheological properties of cement paste
-
Novel active crack width control technique to reduce the variation on water permeability results for self-healing concrete
-
Effects of rotational shearing on rheological behavior of fresh mortar with short glass fiber
-
Feasibility study on real-scale, self-healing concrete slab by developing a smart capsules network and assessed by a plethora of advanced monitoring techniques
-
Comparison of different techniques to study the nanostructure and the microstructure of cementitious materials with and without superabsorbent polymers
-
Evaluation and comparison of traditional methods and Electron Probe Micro Analysis (EPMA) to determine the chloride ingress perpendicular to cracks in self-healing concrete
-
Aided regeneration system of aged asphalt binder based on microcapsule technology
-
The effect of water sorption/desorption on fatigue deflection of OSB
-
Membrane action in reinforced glass beam systems : experimental setup and results
-
Efficiency assessment of hybrid coatings for natural building stones : advanced and multi-scale laboratory investigation
-
- Journal Article
- A1
- open access
Flexural impact response of textile reinforced inorganic phosphate cement composites (TRC)
-
Reliability analysis of FRP strengthened RC beams considering compressive membrane action
-
Effect of natural carbonation on the pore structure and elastic modulus of the alkali-activated fly ash and slag pastes
-
Classification of uncoated plywood based on moisture dynamics
-
Effective diffusivity of cement pastes from virtual microstructures : role of gel porosity and capillary pore percolation
-
External treatments for the preventive repair of existing constructions : a review
-
Crack remediation in mortar via biomineralization : effects of chemical admixtures on biogenic calcium carbonate
-
A three-dimensional lattice Boltzmann method based reactive transport model to simulate changes in cement paste microstructure due to calcium leaching
-
Influences of shear-mixing rate and fly ash on rheological behavior of cement pastes under continuous mixing
-
Design of high performance concrete with multiple performance requirements for #2 Dongting Lake Bridge
-
Enhanced impact energy absorption in self-healing strain-hardening cementitious materials with superabsorbent polymers
-
Experimental characterization of the self-healing capacity of cement based materials and its effects on the material performance : a state of the art report by COST Action SARCOS WG2
-
Damage evolution of blended cement concrete under sodium sulfate attack in relation to ITZ volume content
-
Mix design factors of self-consolidating cement paste affecting the magnitude of variations in rheological properties induced by the addition time of PCE-superplasticizer
-
Weathering assessment under X-ray tomography of building stones exposed to acid atmospheres at current pollution rate
-
Experimental and numerical evaluation of mechanical properties of interface between filler and hydration products
-
Effect of fly ash on the pore structure of cement paste under a curing period of 3 years
-
Quality improvement of mixed and ceramic recycled aggregates by biodeposition of calcium carbonate
-
Influence of chlorides on magnesium sulphate attack for mortars with Portland cement and slag based binders
-
Influence of intensive vacuum mixing and heat treatment on compressive strength and microstructure of reactive powder concrete incorporating secondary copper slag as supplementary cementitious material
-
Drying shinkage and cracking resistance of concrete made with ternary cementitious components
-
Pore structure description of mortars containing ground granulated blast-furnace slag by mercury intrusion porosimetry and dynamic vapour sorption
-
Development of amine-based pH-responsive superabsorbent polymers for mortar applications
-
Performance of statically indeterminate reinforced glass beams : experimental comparison with determinate systems and effect of a discontinuous glass section
-
Behaviour of monolithic and laminated glass exposed to radiant heating
-
Sulfates in completely recyclable concrete and the effect of CaSO4 on the clinker mineralogy
-
Shear behaviour of SFR-UHPC I-shaped beams
-
Cement hydration and microstructure in concrete repairs with cementitious repair materials
-
A novel material for in situ construction on Mars : experiments and numerical simulations
-
Methods for measuring pH in concrete: a review
-
Self-healing of moving cracks in concrete by means of encapsulated polymer precursors
-
Roofing slate standards : a critical review
-
Compressive membrane action in FRP strengthened RC members
-
Chloride penetration in cracked mortar and the influence of autogenous crack healing
-
Chloride interaction with concretes subjected to a permanent splitting tensile stress level of 65%
-
Effect of secondary copper slag as cementitious material in ultra-high performance mortar
-
Which parameters, other than the water content, influence the robustness of cement paste with SCC consistency?
-
The role of Ca(OH)2 in sulfate salt weathering of ordinary concrete
-
Modelling the evolution of microstructure and transport properties of cement pastes under conditions of accelerated leaching
-
Modelling the carbonation of cement pastes under a CO 2 pressure gradient considering both diffusive and convective transport
-
Capillary water absorption in cracked and uncracked mortar: a comparison between experimental study and finite element analysis
-
Proposed mechanism for the formation of oxychloride crystals during sodium chloride application as a deicer salt in carbonated concrete
-
Effects of crack and ITZ and aggregate on carbonation penetration based on 3D micro X-ray CT microstructure evolution
-
Comparison of different approaches for self-healing concrete in a large-scale lab test
-
Experimental investigations of statically indeterminate reinforced glass beams
-
Alginate biopolymers : counteracting the impact of superabsorbent polymers on mortar strength
-
Production of non-axenic ureolytic spores for self-healing concrete applications
-
Chloride ion penetration into fly ash modified concrete during wetting-drying cycles
-
Microstructural examination and potential application of rendering mortars made of tire rubber and expanded polystyrene wastes
-
Effect of limestone fillers on microstructure and permeability due to carbonation of cement pastes under controlled CO2 pressure conditions
-
Screening of bacteria and concrete compatible protection materials
-
From straw in bricks to modern use of microfibers in cementitious composites for improved autogenous healing: a review
-
Composition and compatibility requirements of mineral repair mortars for stone: a review
-
- Journal Article
- A1
- open access
Drying behaviour of calcium silicate
-
Experimental investigation of residual stresses in steel cellular and castellated members
-
Does concrete suffer sulfate salt weathering?
-
The hydration of cement regenerated from Completely Recyclable Concrete
-
Different methods to model the post-cracking behaviour of hookend-end steel fibre reinforced concrete
-
Application of hydrogel encapsulated carbonate precipitating bacteria for approaching a realistic self-healing in concrete
-
Influence of concrete strength estimation on the structural safety assessment of existing structures
-
Development of a simplified bond stress-slip model for bonded FRP-concrete interfaces
-
The efficiency of self-healing cementitious materials by means of encapsulated polyurethane in chloride containing environments
-
Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.50
-
- Journal Article
- A1
- open access
Impact of internal structure on water-resistance of plywood studied using neutron radiography and X-ray tomography
-
Influence of active crack width control on the chloride penetration resistance and global warming potential of slabs made with fly ash + silica fume concrete
-
Fractal and multifractal analysis on pore structure in cement paste
-
A service life based global warming potential for high-volume fly ash concrete exposed to carbonation
-
Development of a low pH cementitious material to enlarge bioreceptivity
-
Static and fatigue fracture mechanics properties of self-compacting concrete using three-point bending tests and wedge splitting tests
-
Influence of particle size on the early hydration of slag particle activated by Ca(OH)(2) solution
-
A semi-analytical model to predict the pull-out behaviour of inclined hooked-end steel fibres
-
Determination of water permeability of cementitious materials using a controlled constant flow method
-
Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC
-
A microscopic study on ternary blended cement based composites
-
Characterization of ITZ in ternary blended cementitious composites: experiment and simulation
-
Bond between powder type self-compacting concrete and steel reinforcement
-
Porosity characterization of ITZ in cementitious composites: concentric expansion and overflow criterion
-
Fines extracted from porphyry and dolomitic limestone aggregates production : MgO as fluxing agent for a sustainable Portland clinker production
-
The regeneration of cement out of Completely Recyclable Concrete: clinker production evaluation
-
New perspective of service life prediction of fly ash concrete
-
Performance of BFS concrete: k-Value concept versus equivalent performance concept
-
Feasibility study on the use of cellular concrete as alternative raw material for Portland clinker production
-
Durability of SG-laminated reinforced glass beams: effects of temperature, thermal cycling, humidity and load-duration
-
Use of silica gel or polyurethane immobilized bacteria for self-healing concrete
-
Chemical sulfate attack performance of partially exposed cement and cement plus fly ash paste
-
- Journal Article
- A1
- open access
Waste fibrecement : an interesting alternative raw material for a sustainable Portland clinker production
-
Bayesian assessment of the characteristic concrete compressive strength using combined vague-informative priors
-
Acoustic emission analysis for the quantification of autonomous crack healing in concrete
-
Experimental stiffness characterisation of glass/ionomer laminates for structural applications
-
Influence of mix composition on the extent of autogenous crack healing by continued hydration or calcium carbonate formation
-
On the size and shape of initial out-of-plane curvatures in structural glass components
-
Effect of shale addition on properties of sintered coal fly ash
-
Super absorbing polymers an an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks
-
Methods to quantify the colour development of concrete exposed to fire
-
Micro-analysis of the role of interfacial transition zone in 'salt weathering' on concrete
-
On the time dependency of the chloride migration coefficient in concrete
-
Chloride binding of cement-based materials subjected to external chloride environment: a review
-
Effect of used-foundry sand on the mechanical properties of concrete
-
Experimental and numerical determination of the chloride penetration in cracked concrete
-
Interaction between C(3)A, silica fume and naphthalene sulphonate superplasticiser in high performance concrete
-
Bacterial carbonate precipitation as an alternative surface treatment for concrete
-
Effect of corrosion inhibiting admixtures on concrete properties
-
Quantification of the water demand of sand in mortar
-
An evaluation of highly insulated cold zinc roofs in a moderate humid region - part I: hygrothermal performance
-
An evaluation of highly insulated cold zinc roofs in a moderate humid region - part II: corrosion behavior of zinc sheeting