Show
Sort by
-
Hydrothermal synthesis of barium titanate nano/microrods and particle agglomerates using a sodium titanate precursor
-
- Journal Article
- open access
Atomic layer deposition – state-of-the-art approach to nanoscale hetero-interfacial engineering of chemical sensors electrodes: A review
-
- Journal Article
- open access
Hierarchically Au-functionalized derived ultrathin NiO nanosheets for highly sensitive electrochemical hydrazine detection
-
Contribution of compatibilizer backbone to degradation and retained functionality of multiple extruded polypropylene/poly(ethylene terephthalate) blends
-
Large-scale tribological characterisation of eco-friendly basalt and jute fibre reinforced thermoset composites
-
Fretting fatigue lifetime estimation using a cyclic cohesive zone model
-
The effect of a critical micro-void defect on fretting fatigue crack initiation in heterogeneous material using a multiscale approach
-
Spatiotemporal electrochemical sensing in a smart contact lens
-
Abrasive wear behaviour of 27MnB5 steel used in agricultural tines
-
Antibacterial activity of a porous silver doped TiO2 coating on titanium substrates synthesized by plasma electrolytic oxidation
-
- Journal Article
- A1
- open access
Relationship between wetting and capillary pressure in a crude oil/brine/rock system : from nano-scale to core-scale
-
- Journal Article
- A1
- open access
Tribological performance of non-halogenated phosphonium ionic liquids as additives to polypropylene and lithium-complex greases
-
- Journal Article
- A1
- open access
Nanoscale all-oxide-heterostructured bio-inspired optoresponsive nociceptor
-
Optimization and validation of a load-controlled numerical model for single asperity scratch
-
Synergism in multi-asperity abrasion-corrosion of martensitic and dual phase steels in three aqueous electrolytes
-
Water-stable plasma-polymerized N,N-dimethylacrylamide coatings to control cellular adhesion
-
Sputter yield measurements to evaluate the target state during reactive magnetron sputtering
-
Plasma treatment effects on bulk properties of polycaprolactone nanofibrous mats fabricated by uncommon AC electrospinning : a comparative study
-
Numerical modelling of the performance-limiting factors in CZGSe solar cells
-
- Journal Article
- A1
- open access
The competition of termination and shielding to evaluate the success of surface-initiated reversible deactivation radical polymerization
-
Proper orthogonal decomposition for the prediction of fretting wear characteristics
-
Thioacetate-based initiators for the synthesis of thiol-end-functionalized poly(2-oxazoline)s
-
Computational fluid dynamics‐based optimization of dimpled steam cracking reactors for reduced CO2 emissions
-
Ho3+-Yb3+ doped NaGdF4 nanothermometers emitting in BW-I and BW-II : insight into the particle growth intermediate steps
-
Experimental evaluation of interfacial adhesion strength of cold sprayed Ti-6Al-4V thick coatings using an adhesive-free test method
-
Mechanical properties of CoCrCuFeNi multi-principal element alloy thin films on Kapton substrates
-
Toward green flotation : interaction of a sophorolipid biosurfactant with a copper sulfide
-
- Journal Article
- A1
- open access
Intracellular delivery of mRNA in adherent and suspension cells by vapor nanobubble photoporation
-
Exploration of the selectivity and retention behavior of alternative polyacrylamides in temperature responsive liquid chromatography
-
Aging effect of atmospheric pressure plasma jet treated polycaprolactone polymer solutions on electrospinning properties
-
Investigating the stability of cyclopropylamine-based plasma polymers in water
-
Reaction Pathways for Atomic Layer Deposition with Lithium Hexamethyl Disilazide, Trimethyl Phosphate, and Oxygen Plasma
-
A Secondary Reaction Pathway for the Alumina Atomic Layer Deposition Process with Trimethylaluminum and Water, Revealed by Full-Range, Time-Resolved In Situ Mass Spectrometry
-
Design and development of a novel electrochemical abrasion-corrosion tester
-
Spatiotemporal electrochemistry on flexible microelectrode arrays: progress towards smart contact lens integration
-
Plasma polymerization in a nitrogen / ethanol dielectric barrier discharge : a parameter study
-
Comparison of copper electroplating, copper wet etching and linear sweep voltammetry as techniques to investigate the porosity of atomic layer deposited Al2O3
-
In-circuit fault tolerance for FPGAs using dynamic reconfiguration and virtual overlays
-
Weak and strong from meshless methods for linear elastic problem under fretting contact conditions
-
From single asperity to real scale in the wear of agricultural tine
-
Attaching photochemically active ruthenium polypyridyl complex units to amorphous hydrogenated carbon (a-C:H) layers
-
Effect of stress gradient and quadrant averaging on fretting fatigue crack initiation angle and life
-
Tribo-mechanical interpretation for advanced thermoplastics and the effects of wear-induced crystallization
-
Shape of cobalt and platinum nanoparticles under a CO atmosphere : a combined In situ TEM and computational catalysis study
-
- Journal Article
- A1
- open access
Corrosion protection of Cu by atomic layer deposition
-
Operando computational catalysis : shape, structure, and coverage under reaction conditions
-
- Journal Article
- A1
- open access
ESD-failure of E-mode GaN HEMTs : role of device geometry and charge trapping
-
FE8 type laboratory testing of white etching crack (WEC) bearing failure mode in 100Cr6
-
Evaluation of residual stresses induced by cold spraying of Ti-6Al-4V on Ti-6Al-4V substrates
-
Development of phosphor containing functional coatings via cold atmospheric pressure plasma jet - Study of various operating parameters
-
- Journal Article
- A1
- open access
Porous multi-junction thin-film silicon solar cells for scalable solar water splitting
-
Interfacial behavior of orthoborate ionic liquids at inorganic oxide surfaces probed by NMR, IR, and Raman spectroscopy
-
- Journal Article
- A1
- open access
Silica nanofibrous membranes for the separation of heterogeneous azeotropes
-
Land cover mapping in urban environments using hyperspectral APEX data : a study case in Baden, Switzerland
-
Transfer of cells with uptaken nanocomposite, magnetite-nanoparticle functionalized capsules with electromagnetic tweezers
-
- Journal Article
- A1
- open access
Bifunctionalized redox-responsive layers prepared from a thiolactone copolymer
-
Isospectral drums and simple groups
-
- Journal Article
- A1
- open access
Micro and nanoscale characterization of complex multilayer-structured white etching layer in rails
-
Rain erosion resistance of injection moulded and compression moulded polybutylene terephthalate PBT
-
- Journal Article
- A1
- open access
Variability due to short-distance favorable sound propagation and its consequences for immission assessment
-
Saturated long linear aliphatic chain sodium monocarboxylates for the corrosion inhibition of lead objects : an initiative towards the conservation of our lead cultural heritage
-
Finite element analysis of fretting wear under variable coefficient of friction and different contact regimes
-
Fretting fatigue stress analysis in heterogeneous material using direct numerical simulations in solid mechanics
-
Double positive effect of adding hexaethyelene glycol when optimizing the hybridization efficiency of a microring DNA detection assay
-
- Journal Article
- A1
- open access
A multiplexed microfluidic platform for bone marker measurement : a proof-of-concept
-
Titanium surface functionalization with coatings of chitosan and polyphenol-rich plant extracts
-
- Journal Article
- A1
- open access
Linear pencils encoded in the Newton polygon
-
Acrylate-based coatings to protect lead substrates
-
Functionalization of gold nanoparticles with nanobodies through physical adsorption
-
Structural evolution and growth mechanisms of RF-magnetron sputter-deposited hydroxyapatite thin films on the basis of unified principles
-
- Journal Article
- A1
- open access
Thermoresponsive laterally-branched polythiophene phenylene derivative as water-soluble temperature sensor
-
- Journal Article
- A1
- open access
The target material influence on the current pulse during high power pulsed magnetron sputtering
-
Atmospheric pressure non-thermal plasma assisted polymerization of poly (ethylene glycol) methylether methacrylate (PEGMA) on low density polyethylene (LDPE) films for enhancement of biocompatibility
-
- Journal Article
- A1
- open access
Study on physio-chemical properties of plasma polymerization in C2H2/N2 plasma and their impact on COL X
-
Organic matter interactions with natural manganese oxide and synthetic birnessite
-
Specular and diffuse reflectance of phase-separated polymer blend films
-
Adsorption of volatile polonium and bismuth species on metals in various gas atmospheres : part I : adsorption of volatile polonium and bismuth on gold
-
- Journal Article
- A1
- open access
Moisture behavior and structural changes of plywood during outdoor exposure
-
- Journal Article
- A1
- open access
Extrinsic calibration of camera networks based on pedestrians
-
Salt-driven deposition of thermoresponsive polymer-coated metal nanoparticles on solid substrates
-
The effect of the substrate characteristics on the electrochemical nucleation and growth of copper
-
Quasi two-dimensional Si-O superlattices : atomically controlled growth and electrical properties
-
Volatilisation of pesticides after application in vegetable greenhouses
-
Ultrafast layer-by-layer assembly of thin organic films based on triazolinedione click chemistry
-
Biofunctionalization of poly(L-lactide-co-glycolide) by post-plasma grafting of 2-aminoethyl methacrylate and gelatin immobilization
-
In situ time-lapse synchrotron radiation X-ray diffraction of silver corrosion
-
Development of high-speed image acquisition systems for spray characterization based on single-droplet experiments
-
Droplet generation and characterization using a piezoelectric droplet generator and high speed imaging techniques
-
Soil carbon storage controlled by interactions between geochemistry and climate
-
Drying of salt contaminated porous media: effect of primary and secondary nucleation
-
Rewritable polymer brush micropatterns grafted by triazolinedione click chemistry
-
Catalytic CO oxidation over well-defined cobalt oxide nanoparticles: size-reactivity correlation
-
Tunable temperature responsive liquid chromatography through thiolactone-based immobilization of poly(N-isopropylacrylamide)
-
- Conference Paper
- P1
- open access
A well-conditioned time domain EFIE for densely discretized low frequency problems
-
- Journal Article
- A1
- open access
A DC stable and large-time step well-balanced TD-EFIE based on quasi-Helmholtz projectors
-
A new strategy for corrosion inhibition coatings for lead heritage metal objects
-
- Journal Article
- A1
- open access
Wind resource mapping using landscape roughness and spatial interpolation methods
-
Influence of deposition conditions on the composition, texture and microstructure of RF-magnetron sputter-deposited hydroxyapatite thin films
-
- Conference Paper
- P1
- open access
Eliminating the DC instability of the time domain electric field integral equation
-
Efficient charge transfer in solution-processed PbS quantum dot-reduced graphene oxide hybrid materials
-
Fractal and multifractal analysis on pore structure in cement paste
-
Photonic detection and characterization of DNA using sapphire microspheres
-
Linear systems on a class of anticanonical rational threefolds
-
Effects of ceria nanoparticle concentrations on the morphology and corrosion resistance of cerium-silane hybrid coatings on electro-galvanized steel substrates
-
Biogenic nanopalladium based remediation of chlorinated hydrocarbons in marine environments
-
Oxidative coupling of methane: catalytic behaviour assessment via comprehensive kinetic modelling
-
Antimicrobial properties of a nanostructured eggshell from a compost-nesting bird
-
3D tree-ring analysis using helical X-ray tomography
-
Engineering of composite organosilicon thin films with embedded silver nanoparticles via atmospheric pressure plasma process for antibacterial activity
-
Oxygen sensitivity of atomically passivated CdS nanocrystal films
-
Chemically orthogonal trifunctional Janus beads by photochemical 'sandwich' microcontact printing
-
Organic silicone sol-gel polymer as a noncovalent carrier of receptor proteins for label-free optical biosensor application
-
- Journal Article
- A1
- open access
A space-time mixed Galerkin marching-on-in-time scheme for the time-domain combined field integral equation
-
- Journal Article
- A1
- open access
Extending Hirshfeld-I to bulk and periodic materials
-
Influence of the louver and delta winglet geometry on the thermal hydraulic performance of a compound heat exchanger
-
Performance enhancement of a louvered fin heat exchanger by using delta winglet vortex generators
-
The influence of nano hydroxyapatite coating on osseointegration after extended healing periods
-
Norovirus transfer between foods and food contact materials
-
- Journal Article
- A1
- open access
On a well-conditioned electric field integral operator for multiply connected geometries
-
Improving foliar applications of entomopthogenic nematodes by selecting adjuvants and spray nozzles
-
Effect of low-temperature processing on dry film photoresist properties for flexible electronics
-
- Journal Article
- A1
- open access
One-pot, additive-free preparation of functionalized polyurethanes via amine-thiol-ene conjugation
-
Modeling the photocatalytic degradation of moxifloxacin by means of a stochastic cellular automaton
-
Microbiological performance of a food safety management system in a food service operation
-
Bifunctional Janus beads made by 'sandwich' microcontact printing using click chemistry
-
Influence of biofouling on pharmaceuticals rejection in NF membrane filtration
-
Nano hydroxyapatite-coated implants improve bone nanomechanical properties
-
Poly(2-oxazoline) hydrogel monoliths via thiol-ene coupling
-
Ab initio analysis of a vacancy and a self-interstitial near single crystal silicon surfaces: implications for intrinsic point defect incorporation during crystal growth from a melt
-
- Journal Article
- A1
- open access
An efficient 1-D periodic boundary integral equation technique to analyze radiation onto straight and meandering microstrip lines
-
Intra-urban spatial variation of magnetic particles : monitoring via leaf saturation isothermal remanent magnetisation (SIRM)
-
Impact of remotely sensed land-cover proportions on urban runoff prediction
-
Histological and three-dimensional evaluation of osseointegration to nanostructured calcium phosphate-coated implants
-
Self-stratifying antimicrobial polyurethane coatings
-
Antimicrobial polyurethane coatings based on ionic liquid quaternary ammonium compounds
-
- Journal Article
- A1
- open access
Interaction between mean flow and thermo-hydraulic behaviour in inclined louvered fins
-
Influence of operating parameters on plasma polymerization of acrylic acid in a mesh-to-plate dielectric barrier discharge
-
Combined experimental and numerical flow field study of inclined louvered fins
-
ALD-grown seed layers for electrochemical copper deposition integrated with different diffusion barrier systems
-
The peri-implant sulcus compared with internal implant and suprastructure components: a microbiological analysis
-
A 2-year prospective study on immediate loading with fluoride-modified implants in the edentulous mandible
-
Novel amphiphilic mikto-arm star-shaped copolymers for the preparation of PLA-based nanocarriers
-
- Journal Article
- A1
- open access
The 2-transitive transplantable isospectral drums
-
Adaptive constructive polynomial fitting
-
Multifunctional poly(2-oxazoline) nanoparticles for biological applications
-
- Journal Article
- A1
- open access
Real-time PCR expression profiling of genes encoding potential virulence factors in Candida albicans biofilms: identification of model-dependent and -independent gene expression
-
- Journal Article
- A1
- open access
Hearing shapes of drums : mathematical and physical aspects of isospectrality
-
- Journal Article
- A1
- open access
Structure of adsorption layers of amphiphilic copolymers on inorganic or organic particle surfaces
-
Self-assembled supramolecular array of polymeric phthalocyanine on gold for the determination of hydrogen peroxide
-
Performance evaluation of passive cooling in office buildings based on uncertainty and sensitivity analysis
-
Target localization and measured scattered field pre-processing using spectral bandwith minimalization for shallowly buried target problems
-
A note on the Fueter theorem
-
Finite element models for brush-debris interaction in road sweeping
-
- Journal Article
- A1
- open access
Monitoring ALS1 and ALS3 Gene Expression During In Vitro Candida albicans Biofilm Formation Under Continuous Flow Conditions
-
Tunable quasi-homeotropic liquid crystal pretilt angle based on competing alignment layers
-
SOI optical microring resonator with poly(ethylene glycol) polymer brush for label-free biosensor applications
-
Step-growth polymerization and 'click' chemistry: The oldest polymers rejuvenated
-
Feature controlled adaptive difference operators
-
Hollow polypyrrole containers with regulated uptake/release properties
-
Mercury volatilization from three floodplain soils at the Central Elbe River, Germany
-
Threshold concentration of easily assimilable organic carbon in feedwater for biofouling of spiral-wound membranes
-
Time domain Calderón identities and their application to the integral equation analysis of scattering by PEC objects, part I: preconditioning
-
Experimental extrapolation model for friction and wear of polymers on different testing scales
-
Screening and separation of charges in microscale devices: complete planar solution of the Poisson-Boltzmann equation
-
Ozonization and Cyclic Voltammetry as Efficient Methods for the Regeneration of Gelatin-Coated SPR Chips
-
The effect of the decontamination process on the microbial and nutritional quality of fresh-cut vegetables
-
Cryogels from poly(2-hydroxyethyl methacrylate) : macroporous, interconnected materials with potential as cell scaffolds
-
Investigation of patinas formed on Chinese bronzes using modern multianalytical techniques
-
Extracting the spike process from the EEG by spatially constrained ICA
-
Persistence of Campylobacter jejuni on surfaces in a processing environment and on cutting boards
-
Diffusion length of positrons and positronium investigated using a positron beam with longitudinal geometry
-
The measurement of the drag characteristics of tin-free self-polishing co-polymers and fouling release coatings using a rotor apparatus
-
What density-functional theory can tell us about the spin-density wave in Cr
-
Determination of the K adsorption site on Fe(110) with XSW
-
X-ray photoelectron spectroscopic and atomic force microscopic studies of pyrolytically coated graphite and highly oriented pyrolytic graphite used for electrothermal vaporization
-
Relaxation processes during the selective oxidation of aqueous ethanol with oxygen on a platinum catalyst
-
The role of silanols in the modification of silica gel with aminosilanes
-
Reaction of NH3 with trichlorosilylated silica gel : a study of the reaction mechanism as a function of temperature
-
Modelling of the reaction-phase interaction of γ-aminopropyltriethoxysilane with silica
-
Influence of water in the reaction of γ-aminopropyltriethoxysilane with silica gel : a Fourier-transform infrared and cross-polarisation magic-angle-spinning nuclear magnetic resonance study