Ghent University Academic Bibliography

Your filters: cql: keyword exact "general materials science"

Add to list
- Journal Article
- A1
- open access
Defect modes generated in a stack of spin-coated chiral liquid crystal layers

Frederik Van Acker (UGent) , Bo-Han Lin, Chun-Ta Wang, Kristiaan Neyts (UGent) and Jeroen Beeckman (UGent)

(2024) CRYSTALS. 14(3).
Add to list
- Journal Article
- A1
- open access
Playing with low amounts of expanded graphite for melt-processed polyamide and copolyester nanocomposites to achieve control of mechanical, tribological, thermal and dielectric properties

Ruben Vande Ryse (UGent) , Michiel Van Osta (UGent) , Mounia Gruyaert, Maarten Oosterlinck (UGent) , Ádám Kalácska (UGent) , Mariya Edeleva (UGent) , Frederik Pille (UGent) , Dagmar D'hooge (UGent) , Ludwig Cardon (UGent) and Patrick De Baets (UGent)

(2024) NANOMATERIALS. 14(7).
Add to list
- Journal Article
- A1
- open access
Controlling Pt nanoparticle sintering by sub-monolayer MgO ALD thin films

Zhang Zhiwei (UGent) , Matthias Filez (UGent) , Eduardo Solano, Nithin Poonkottil (UGent) , Jin Li (UGent) , Matthias Minjauw (UGent) , Hilde Poelman (UGent) , Martin Rosenthal, Philipp Brüner, Vladimir Galvita (UGent) , et al.

(2024) NANOSCALE. 16(10). p.5362-5373
Add to list
- Journal Article
- A1
- open access
Transient analysis of a cracked functionally graded magneto‐electro‐elastic rectangular finite plane under anti‐plane mechanical and in‐plane electric and magnetic impacts

Mojtaba Ayatollahi, Magd Abdel Wahab (UGent) and Seyyed Mohammad Moein Hashemi

(2024) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. 47(1). p.220-239
Add to list
- Journal Article
- A1
- open access
Weighted sumrate maximizing hybrid precoder for MU-MISO-OFDM

Sander Cornelis (UGent) , Nele Noels (UGent) and Marc Moeneclaey (UGent)

(2024) IEEE ACCESS. 12. p.30700-30722
Add to list
- Journal Article
- A1
- open access
On the potential correlation between dynamic strain aging and liquid metal embrittlement in T91/LBE system

Cholidah Akbar Fitriani (UGent) , Lisa Claeys (UGent) , Serguei Gavrilov and Kim Verbeken (UGent)

(2024) METALS. 14(1).
Add to list
- Journal Article
- A2
- open access
Analysis of road infrastructure and traffic factors influencing crash frequency : insights from generalised poisson models

Muhammad Wisal Khattak (UGent) , Hans De Backer (UGent) , Pieter De Winne (UGent) , Tom Brijs and Ali Pirdavani

(2024) INFRASTRUCTURES. 9(3).
Add to list
- Journal Article
- A1
- open access
Non-destructive evaluation of ductile-porous versus brittle 3D printed vascular networks in self-healing concrete

Yasmina Shields (UGent) , Eleni Tsangouri, Claire Riordan, Cristina De Nardi, Jose Ricardo Assunção Godinho, Ticho Ooms (UGent) , Paola Antonaci, Dave Palmer, Abir Al-Tabbaa, Tony Jefferson, et al.

(2024) CEMENT & CONCRETE COMPOSITES. 145.
Add to list
- Journal Article
- A1
- open access
Tunable self-referenced molecular thermometers via manipulation of dual emission in platinum(II) pyridinedipyrrolide complexes

Andreas Russegger, Susanne M. Fischer, Angela Debruyne (UGent) , Helmar Wiltsche, A. Daniel Boese, Ruslan Dmitriev (UGent) and Sergey M. Borisov

(2024) ACS APPLIED MATERIALS & INTERFACES. 16(9). p.11930-11943
Add to list
- Journal Article
- A1
- open access
Aggregate type and concrete age effects on anchor breakout performance : large database and insights

Krešimir Ninčević, Thierry Guillet, Omar Al Mansouri and Roman Wan-Wendner (UGent)

(2024) APPLIED SCIENCES-BASEL. 14(5).
Add to list
- Journal Article
- A1
A nonlinear optimization method for calibration of large‐scale deep cement mixing in very soft clay deep excavation

Thanh Sang To, Minh Hoang Le, Thien Quoc Huynh, Samir Khatir (UGent) , Magd Abdel Wahab (UGent) and Thanh Cuong Le

(2024) INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS. 48(8). p.1949-1978
Add to list
- Journal Article
- A1
- open access
The effects of strain rate and anisotropy on the formability and mechanical behaviour of aluminium alloy 2024-T3

Martin Harant, Patricia Verleysen (UGent) , Milan Forejt and Stepan Kolomy

(2024) METALS. 14(1).
Add to list
- Journal Article
- A1
- open access
Scalable job recommendation with lower congestion using optimal transport

Yoosof Mashayekhi (UGent) , Bo Kang (UGent) , Jefrey Lijffijt (UGent) and Tijl De Bie (UGent)

(2024) IEEE ACCESS. 12. p.55491-55505
Add to list
- Journal Article
- A1
- open access
Durability of CFRP strengthened RC beam after six years exposure to natural hygrothermal environment with sustained loads

Jiahao Bai, Yi Yang, Peiyan Huang, Xinyan Guo, Zhanbiao Chen, Roman Wan-Wendner (UGent) and Wen Li

(2024) INTERNATIONAL JOURNAL OF FATIGUE. 181.
Add to list
- Journal Article
- A1
- open access
Nanoscale chemical diversity of coke deposits on nanoprinted metal catalysts visualized by tip‐enhanced Raman spectroscopy

Matthias Filez (UGent) , Peter Walke, Hai Le‐The, Shuichi Toyouchi, Wannes Peeters, Patrick Tomkins, Jan C. T. Eijkel, Steven De Feyter, Christophe Detavernier (UGent) , Dirk E. De Vos, et al.

(2024) ADVANCED MATERIALS. 36(5).
Add to list
- Journal Article
- A1
- open access
Nanomaterials in electrochemical nanobiosensors of miRNAs

Marziyeh Mousazadeh, Maryam Daneshpour, Saeed Rafizadeh Tafti, Nahid Shoaie, Fatemeh Jahanpeyma, Faezeh Mousazadeh, Fatemeh Khosravi, Patricia Khashayar (UGent) , Mostafa Azimzadeh and Ebrahim Mostafavi

(2024) NANOSCALE. 16(10). p.4974-5013
Add to list
- Journal Article
- A1
Evolutions of microstructure and crystallographic texture in an Fe-1.2 wt.% Si alloy after (a)symmetric warm rolling and annealing

Tuan Nguyen Minh (UGent) , Roumen Petrov (UGent) , Stefano Cicalè and Leo Kestens (UGent)

(2024) JOM. 76(3). p.1015-1030
Add to list
- Journal Article
- A1
Optimizing the shield tunnel backfilling grouts with supplementary cementitious materials by response surface methodology

Chenhui Liu (UGent) , Zhuoyao Li, Adam Bezuijen (UGent) , Lihua Chen and Paulo Cachim

(2024) CONSTRUCTION AND BUILDING MATERIALS. 421.
Add to list
- Journal Article
- A1
- open access
Artificial neural network and YUKI algorithm for notch depth prediction in X70 steel specimens

A. Oulad Brahim, R. Capozucca, Samir Khatir (UGent) , E. Magagnini, B. Benaissa, Magd Abdel Wahab (UGent) and Thanh Cuong Le

(2024) THEORETICAL AND APPLIED FRACTURE MECHANICS. 129.
Add to list
- Journal Article
- A1
- open access
Texture formation under control of S phase characteristic and tensile property of hot-rolling 2A12 aluminum alloy improved by brass texture

Qi Zhao (UGent) , Yang Qu, Zhiyi Liu, Hao Ke, Sen Jiang, Xinhong Wang, Chengfu Duan, Zhipeng Zhai and Magd Abdel Wahab (UGent)

(2024) MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 899.
Add to list
- Journal Article
- A1
- open access
Weldability of additively manufactured powder bed fusion 316L stainless steel using arc and laser welding

Koen Faes, Rafael Gomes Nunes Silva (UGent) , Florian Probst, Robin Ceuppens and Wim De Waele (UGent)

(2024) CRYSTALS. 14(4).
Add to list
- Journal Article
- A1
- open access
Size-controlled oxide perovskite nanocrystal synthesis : design, optimization, and mechanism insights

Pedro López Domínguez (UGent) , Javier Diez Sierra, Sebastian Schäfer, Stephan A Schunk, Michael Bäcker, Klaartje De Buysser (UGent) , Isabel Van Driessche (UGent) and Hannes Rijckaert (UGent)

(2024) CRYSTAL GROWTH & DESIGN. 24(6). p.2362-2369
Add to list
- Journal Article
- A1
- open access
Fatigue crack propagation of AA2024 alloy under texture control using crystal plasticity coupled with accelerated cyclic cohesive zone model

Qi Zhao (UGent) , Magd Abdel Wahab (UGent) , Yong Ling (UGent) , Zhiyi Liu and Dagang Wang

(2024) ENGINEERING FRACTURE MECHANICS. 296.
Add to list
- Journal Article
- A1
- open access
Lipid nanoparticle encapsulation empowers poly(I:C) to activate cytoplasmic RLRs and thereby increases its adjuvanticity

Alexander Lamoot, Sonia Jangra, Gabriel Laghlali, Prajakta Warang, Gagandeep Singh, Lauren A. Chang, Seok‐Chan Park, Gagandeep Singh, Kim Deswarte (UGent) , Zifu Zhong (UGent) , et al.

(2024) SMALL. 20(10).
Add to list
- Journal Article
- A1
- open access
Experimental investigation and constitutive material modelling of low cycle fatigue of EUROFER97 for fusion applications

Hussein Zahran (UGent) , Aleksandr Zinovev, Dmitry Terentyev, Xiaowei Wang (UGent) and Magd Abdel Wahab (UGent)

(2024) JOURNAL OF NUCLEAR MATERIALS. 588.
Add to list
- Journal Article
- A1
- open access
Modal parameter identification in civil structures via Hilbert transform ensemble with improved empirical wavelet transform

Shiqiang Qin, Jian Tang, Jiacheng Feng, Yunlai Zhou, Fei Yang and Magd Abdel Wahab (UGent)

(2024) JOURNAL OF VIBRATION AND CONTROL. 30(7-8). p.1621-1634
Add to list
- Journal Article
- A1
- open access
An experimental investigation on the relation between corrosion and thermohydraulic behavior in heat exchangers for geothermal applications

Arne Simons (UGent) , Willem Faes (UGent) , Tom Depover (UGent) , Steven Lecompte (UGent) , Michel De Paepe (UGent) and Kim Verbeken (UGent)

(2024) METALS. 14(2).
Add to list
- Journal Article
- A2
- open access
Shoulder pain in persons with tetraplegia and the association with force application during manual wheelchair propulsion

Ursina Arnet, Fransiska M. Bossuyt, Benjamin Beirens (UGent) and Wiebe H.K. de Vries

(2024) ARCHIVES OF REHABILITATION RESEARCH AND CLINICAL TRANSLATION. 6(1).
Add to list
- Journal Article
- A1
- open access
Natural language processing in knowledge-based support for operator assistance

Fatemeh Besharati Moghaddam (UGent) , dr.ir. Angel J. Lopez (UGent) , Stijn De Vuyst (UGent) and Sidharta Gautama (UGent)

(2024) APPLIED SCIENCES-BASEL. 14(7).
Add to list
- Journal Article
- A1
- open access
Condition assessment of a concrete filled steel tube arch bridge using in-situ vibration measurements and an Improved Artificial Fish Swarm Algorithm

Shiqiang Qin, Jiacheng Feng, Jian Tang, Xuejin Huo, Yunlai Zhou, Fei Yang and Magd Abdel Wahab (UGent)

(2024) COMPUTERS & STRUCTURES. 291.
Add to list
- Journal Article
- A1
- open access
An overview of estimations for the high-cycle fatigue strength of conventionally manufactured steels based on other mechanical properties

Robin Motte (UGent) and Wim De Waele (UGent)

(2024) METALS. 14(1).
Add to list
- Journal Article
- A1
- open access
Explainable deep learning to classify royal navy ships

Bart Baesens, Amy Adams, Rodrigo Pacheco-Ruiz, Ann-Sophie Baesens and Seppe vanden Broucke (UGent)

(2024) IEEE ACCESS. 12. p.1774-1785
Add to list
- Journal Article
- A1
- open access
From corrosion casting to virtual dissection : contrast‐enhanced vascular imaging using hafnium oxide nanocrystals

Eline Goossens (UGent) , Loren Deblock (UGent) , Lisa Caboor (UGent) , Dietger Van den Eynden, Iván Josipovic (UGent) , Pablo Reyes Isaacura (UGent) , Elizaveta Maksimova, Matthias Van Impe (UGent) , Anne Bonnin, Patrick Segers (UGent) , et al.

(2024) SMALL METHODS. 8(10).
Add to list
- Journal Article
- A1
- open access
Neutron radiography with simultaneous deformation measurements demand rethinking the modelling of imbibition in cement paste

Natalia Mariel Alderete (UGent) , Yury Villagrán-Zaccardi, Yasmina Shields (UGent) , Philip Van den Heede (UGent) , María Paula Zappitelli, Ravi Patel, Balša Jovanović (UGent) , Pavel Trtik and Nele De Belie (UGent)

(2024) CEMENT AND CONCRETE RESEARCH. 179.
Add to list
- Journal Article
- A1
- open access
Study of the effect of defects on fatigue life prediction of additive manufactured Ti-6Al-4V by combined use of micro-computed tomography and fracture-mechanics-based simulation

Shiwei Han (UGent) , Tien Dung Dinh (UGent) , Ives De Baere (UGent) , Matthieu Boone (UGent) , Iván Josipovic (UGent) and Wim Van Paepegem (UGent)

(2024) INTERNATIONAL JOURNAL OF FATIGUE. 180.
Add to list
- Journal Article
- A1
- open access
Comparative analysis of elastic polyester sportswear fabrics with printed graphene patterns

Simona Vasile, Magdalena Georgievska (UGent) , Cosmin Copot and Alexandra De Raeve

(2023) MATERIALS. 16(5).
Add to list
- Journal Article
- A1
- open access
Understanding and hindering ion migration in Er,Yb:LiLuF4 core-shell nanoparticles for nanothermometers with enhanced photoluminescence

Mirijam Lederer (UGent) , Hannes Rijckaert (UGent) and Anna Kaczmarek (UGent)

(2023) ACS APPLIED NANO MATERIALS. 6(4). p.2438-2449
Add to list
- Journal Article
- A1
- open access
Fretting fatigue lifetime estimation for heterogeneous material using critical distance with mesh control

Can Wang (UGent) , Dagang Wang and Magd Abdel Wahab (UGent)

(2023) ENGINEERING FRACTURE MECHANICS. 281.
Add to list
- Journal Article
- A1
- open access
Multi-parameter identification of concrete dam using polynomial chaos expansion and slime mould algorithm

Yifei Li (UGent) , Cao MaoSen, Ngoc Hoa Tran, Samir Khatir (UGent) and Magd Abdel Wahab (UGent)

(2023) COMPUTERS & STRUCTURES. 281.
Add to list
- Journal Article
- A1
- open access
Two-Scale analysis of fretting fatigue crack initiation in heterogeneous materials using Continuum Damage Mechanics

Can Wang (UGent) , Wenbin Zhang, Chao Li (UGent) , Dagang Wang and Magd Abdel Wahab (UGent)

(2023) INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES. 269.
Add to list
- Journal Article
- A1
- open access
Spark discharge doping : achieving unprecedented control over aggregate fraction and backbone ordering in poly(3‐hexylthiophene) solutions

Fabian Eller, Felix A. Wenzel, Richard Hildner, Remco Havenith (UGent) and Eva M. Herzig

(2023) SMALL. 19(21).
Add to list
- Journal Article
- A1
- open access
Microscopic linker distribution in mixed-linker zeolitic imidazolate frameworks via computational raman spectroscopy : implications for gas separation

Alexander Hoffman (UGent) , João Marreiros, Sven Rogge (UGent) , Rob Ameloot and Veronique Van Speybroeck (UGent)

(2023) ACS APPLIED NANO MATERIALS. 6(7). p.5645-5652
Add to list
- Journal Article
- A1
- open access
Functional optimization for a Beam Driven Plasma Neutralizer in DEMO Neutral Beam Injector

Fabio Veronese, Piero Agostinetti, Christian Hopf and Giuseppe Starnella

(2023) FUSION ENGINEERING AND DESIGN. 193.
Add to list
- Journal Article
- A1
- open access
Digital image correlation for measuring full-field residual stresses in wire and arc additive manufactured components

Dibakor Boruah (UGent) , Nele Dewagtere, Bilal Ahmad, Rafael Nunes, Jeroen Tacq, Xiang Zhang, Hua Guo, Wim Verlinde and Wim De Waele (UGent)

(2023) MATERIALS. 16(4).
Add to list
- Journal Article
- A1
- open access
Effect of growth temperature and atmosphere exposure time on impurity incorporation in sputtered Mg, Al, and Ca thin films

Shamsa Aliramaji, Philipp Keuter, Deborah Neuß, Marcus Hans, Daniel Primetzhofer, Diederik Depla (UGent) and Jochen M. Schneider

(2023) MATERIALS. 16(1).
Add to list
- Journal Article
- A1
- open access
The native liver as inspiration to create superior in vitro hepatic models

Nathan Carpentier, Luca Urbani, Peter Dubruel (UGent) and Sandra Van Vlierberghe (UGent)

(2023) BIOMATERIALS SCIENCE. 11(4). p.1091-1115
Add to list
- Journal Article
- A1
- open access
Interplay between membrane imperfections and external concentration polarization

Arnout D'Haese (UGent) and Andriy Yaroshchuk

(2023) JOURNAL OF MEMBRANE SCIENCE. 676.
Add to list
- Journal Article
- A1
- open access
Volumetric printing of thiol‐ene photo‐cross‐linkable poly(ε‐caprolactone) : a tunable material platform serving biomedical applications

Quinten Thijssen (UGent) , Astrid Quaak (UGent) , Joseph Toombs, Elly De Vlieghere (UGent) , Laurens Parmentier (UGent) , Hayden Taylor and Sandra Van Vlierberghe (UGent)

(2023) ADVANCED MATERIALS. 35(19).
Add to list
- Journal Article
- A1
- open access
The mechanism behind the effect of building orientation and surface roughness on hydrogen embrittlement of laser powder bed fused Ti-6Al-4V

Liesbet Deconinck (UGent) , Elena Bernardo Quejido, María T. Villa Vidaller, Eric Jägle, Kim Verbeken (UGent) and Tom Depover (UGent)

(2023) ADDITIVE MANUFACTURING. 72.
Add to list
- Journal Article
- A1
- open access
Purifying single photon emission from giant shell CdSe/CdS quantum dots at room temperature

Sergii Morozov, Stefano Vezzoli, Alina Myslovska (UGent) , Alessio Di Giacomo, N. Asger Mortensen, Iwan Moreels (UGent) and Riccardo Sapienza

(2023) NANOSCALE. 15(4). p.1645-1651
Add to list
- Journal Article
- A1
- open access
The mechanism of hydride formation during electrochemical hydrogen charging of Ti-6Al-4V

Liesbet Deconinck (UGent) , Tom Depover (UGent) and Kim Verbeken (UGent)

(2023) MATERIALS TODAY SUSTAINABILITY. 22.
Add to list
- Journal Article
- A1
- open access
Modeling of hydrogen-charged notched tensile tests of an X70 pipeline steel with a hydrogen-informed Gurson model

Robin Depraetere (UGent) , Wim De Waele (UGent) , Margo Cauwels (UGent) , Tom Depover (UGent) , Kim Verbeken (UGent) and Stijn Hertelé (UGent)

(2023) MATERIALS. 16(13).
Add to list
- Journal Article
- A1
- open access
Metal nanocatalyst sintering interrogated at complementary length scales

Eduardo Solano, Jolien Dendooven (UGent) , Davy Deduytsche (UGent) , Nithin Poonkottil (UGent) , Ji-Yu Feng, Maarten B. J. Roeffaers, Christophe Detavernier (UGent) and Matthias Filez (UGent)

(2023) SMALL. 19(5).
Add to list
- Journal Article
- A1
- open access
Laser‐scanning microscopy for electrophoretic mobility characterization of single nanoparticles

Lucas Oorlynck (UGent) , Yera Ussembayev (UGent) , Ingrid Amer Cid, Juan Fraire (UGent) , Charlotte Hinnekens (UGent) , Kevin Braeckmans (UGent) and Filip Strubbe (UGent)

(2023) PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION. 40(1).
Add to list
- Journal Article
- A1
- open access
Role of anisotropy on strain localization at high-strain rates in Ti6Al4V

Luca Corallo, Benoit Revil-Baudard, Oana Cazacu and Patricia Verleysen (UGent)

(2023) EUROPEAN JOURNAL OF MECHANICS A-SOLIDS. 97.
Add to list
- Journal Article
- A1
- open access
Plasmonic nanodomains decorated on two-dimensional oxide semiconductors for photonic-assisted CO2 conversion

Mohammad Karbalaei Akbari (UGent) , Nasrin Lopa (UGent) , Jihae Park (UGent) and Serge Zhuiykov (UGent)

(2023) MATERIALS. 16(10).
Add to list
- Miscellaneous
Metal nanocatalyst sintering interrogated at complementary length scales (Small 5/2023)

Eduardo Solano, Jolien Dendooven (UGent) , Davy Deduytsche (UGent) , Nithin Poonkottil (UGent) , Ji-Yu Feng, Maarten B. J. Roeffaers, Christophe Detavernier (UGent) and Matthias Filez (UGent)

(2023) SMALL. 19(5).
Add to list
- Journal Article
- A1
- open access
Acoustic-activated Se crystalline nanodomains at atomically-thin liquid-metal piezoelectric heterointerfaces for synergistic CO2 conversion

Mohammad Karbalaei Akbari (UGent) , Francis Verpoort, Jie Hu and Serge Zhuiykov (UGent)

(2023) ACS APPLIED MATERIALS & INTERFACES. 15(33). p.39716-39731
Add to list
- Journal Article
- A1
- open access
Evaluation of microstructural and environmental effects on the hydrogen uptake and desorption in high-strength carbon steels : a thermal desorption spectroscopy study

Shabnam Karimi, Iman Taji, Simona Palencsár, Arne Dugstad, Tarlan Hajilou, Afrooz Barnoush, Kim Verbeken (UGent) , Roy Johnsen and Tom Depover (UGent)

(2023) CORROSION SCIENCE. 219.
Add to list
- Miscellaneous
Chiral photonic micromotors : uni‐ and bidirectional rotation and speed control in chiral photonic micromotors powered by light (Small 20/2023)

Yera Ussembayev (UGent) , Noah De Witte, Xiaohong Liu, Alberto Belmonte, Tom Bus, Sjoukje Lubach, Filip Beunis (UGent) , Filip Strubbe (UGent) , Albert P. H. J. Schenning and Kristiaan Neyts (UGent)

(2023) SMALL. 19(20).
Add to list
- Journal Article
- A1
- open access
Mortar cure-dependent effects on adhesive anchor systems loaded in tension

Stefan Meißl, Krešimir Ninčević, Bilen Emek Abali and Roman Wan-Wendner (UGent)

(2023) CONSTRUCTION AND BUILDING MATERIALS. 362.
Add to list
- Journal Article
- A1
- open access
Role of cementite morphology on corrosion layer formation of high-strength carbon steels in sweet and sour environments

Shabnam Karimi, Iman Taji, Tarlan Hajilou, Simona Palencsár, Arne Dugstad, Afrooz Barnoush, Kim Verbeken (UGent) , Tom Depover (UGent) and Roy Johnsen

(2023) CORROSION SCIENCE. 214.
Add to list
- Miscellaneous
Turning impossible water sliding on water-loving surfaces possible

Chuanlong Ma (UGent) , Anton Nikiforov (UGent) , Changtao Chen (UGent) , Kostya (Ken) Ostrikov, Nathalie De Geyter (UGent) and Rino Morent (UGent)

(2023) MATTER. 6(3). p.653-655
Add to list
- Journal Article
- A1
Development of HVDC gas-insulated components for the power supply of neutral beam injectors

Francesco Lucchini and Nicolo Marconato

(2023) IEEE ACCESS. 11. p.9731-9741
Add to list
- Journal Article
- A1
- open access
Gradual deterioration behavior of the load-bearing strength of main cable wires in a suspension bridge

Hailang Chong, Dagang Wang, Bo Wang, Xiaoman Shen and Magd Abdel Wahab (UGent)

(2023) APPLIED SCIENCES-BASEL. 13(1).
Add to list
- Miscellaneous
Materials for a changing planet

Veronique Van Speybroeck (UGent) and Guillaume Maurin

(2023) NATURE MATERIALS. 22(1). p.12-13
Add to list
- Journal Article
- A1
- open access
Process optimization and characterization of dense pure copper parts produced by paste-based 3D micro-extrusion

Margherita Beretta (UGent) , Samanwitha Kolli, Ahmed Selema (UGent) , Peter Sergeant (UGent) , Leo Kestens (UGent) , Marleen Rombouts and Jozef Vleugels

(2023) ADDITIVE MANUFACTURING. 73.
Add to list
- Journal Article
- A2
- open access
Aza-benzannulated-perylenebisimide-porphyrin dyad as an intensely absorbing donor in bulk-heterojunction organic solar cells

Ayushi Kaushik, Subhrajyoti Bhandary (UGent) , Ganesh D. Sharma and Jeyaraman Sankar

(2023) MATERIALS ADVANCES. 4(23). p.6358-6366
Add to list
- Journal Article
- A1
- open access
Crystalline nanodomains at multifunctional two-dimensional liquid-metal hybrid interfaces

Mohammad Karbalaei Akbari (UGent) , Nasrin Lopa (UGent) and Serge Zhuiykov (UGent)

(2023) CRYSTALS. 13(4).
Add to list
- Journal Article
- A1
In-situ hydrogen embrittlement evaluation of as-built and heat treated laser powder bed fused Ti-6Al-4V versus conventionally cold rolled Ti-6Al-4V

Liesbet Deconinck (UGent) , María T. Villa Vidaller, Elena Bernardo Quejido, Eric A. Jägle, Tom Depover (UGent) and Kim Verbeken (UGent)

(2023) ADDITIVE MANUFACTURING. 76.
Add to list
- Journal Article
- A1
- open access
Controlled BZO nanorod growth and improved flux pinning in YBCO films grown on vicinal STO substrates

Moe Moe Aye, Elmeri Rivasto, Hannes Rijckaert (UGent) , Hannu Huhtinen, Isabel Van Driessche (UGent) and Petriina Paturi

(2023) CRYSTAL GROWTH & DESIGN. 23(11). p.7971-7981
Add to list
- Journal Article
- A1
- open access
A new methodology to predict the sequence of GFRP layers using machine learning and JAYA algorithm

Fahem Noureddine, Idir Belaidi, Oulad Brahim Abdelmoumin, Roberto Capozucca, Thanh Cuong Le, Samir Khatir (UGent) and Magd Abdel Wahab (UGent)

(2023) MECHANICS OF MATERIALS. 184.
Add to list
- Journal Article
- A1
- open access
Numerical device modeling for direct Z-scheme junctions using a solar cell simulator

Nithin Jacob (UGent) , Jeroen Lauwaert (UGent) , Bart Vermang and Johan Lauwaert (UGent)

(2023) SOLAR ENERGY. 259. p.320-327
Add to list
- Journal Article
- A1
In silico quantification of 3D thermal gradients and voids during fused filament fabrication deposition to enhance mechanical and dimensional stability

Tom Van Waeleghem (UGent) , Flavio H. Marchesini (UGent) , Ludwig Cardon (UGent) and Dagmar D'hooge (UGent)

(2023) ADDITIVE MANUFACTURING. 72.
Add to list
- Journal Article
- A1
- open access
Estimation of fretting fatigue lifetime in heterogeneous material based on microstructure characterization and multi-scale homogenization

Can Wang (UGent) , Lingxiao Li, Aleksandr Zinovev, Dmitry Terentyev, Dagang Wang and Magd Abdel Wahab (UGent)

(2023) THEORETICAL AND APPLIED FRACTURE MECHANICS. 126.
Add to list
- Journal Article
- A1
3D printed concrete as stay‐in‐place formwork : mechanics during casting and curing

Michiel Bekaert (UGent) , Kim Van Tittelboom (UGent) and Geert De Schutter (UGent)

(2023) STRUCTURAL CONCRETE. 24(1). p.738-755
Add to list
- Journal Article
- A1
- open access
Estimating the heating of complex nanoparticle aggregates for magnetic hyperthermia

Javier Ortega Julia (UGent) , Daniel Ortega and Jonathan Leliaert (UGent)

(2023) NANOSCALE. 15(24). p.10342-10350
Add to list
- Journal Article
- A1
- open access
Machine learning potentials for metal-organic frameworks using an incremental learning approach

Sander Vandenhaute (UGent) , Maarten Cools-Ceuppens (UGent) , Simon DeKeyser, Toon Verstraelen (UGent) and Veronique Van Speybroeck (UGent)

(2023) NPJ COMPUTATIONAL MATERIALS. 9(1).
Add to list
- Journal Article
- A1
Relation between ASTM E606 specimen geometry and misalignment in strain-controlled fatigue testing

Shiwei Han (UGent) , Tien Dung Dinh (UGent) , Ives De Baere (UGent) and Wim Van Paepegem (UGent)

(2023) INTERNATIONAL JOURNAL OF FATIGUE. 166.
Add to list
- Journal Article
- A1
- open access
Absorbing stress via molecular crumple zones : strain engineering flexibility into the rigid UiO-66 material

Sven Rogge (UGent) , Sander Borgmans (UGent) and Veronique Van Speybroeck (UGent)

(2023) MATTER. 6(5). p.1435-1462
Add to list
- Journal Article
- A1
Bacteria-based self-healing concrete exposed to frost salt scaling

Vanessa Giaretton Cappellesso (UGent) , Tim Van Mullem (UGent) , Elke Gruyaert (UGent) , Kim Van Tittelboom (UGent) and Nele De Belie (UGent)

(2023) CEMENT & CONCRETE COMPOSITES. 139.
Add to list
- Journal Article
- A1
- open access
Exploring the charge storage dynamics in donor–acceptor covalent organic frameworks based supercapacitors by employing ionic liquid electrolyte

Amrita Chatterjee (UGent) , Jiamin Sun, Kuber Singh Rawat (UGent) , Veronique Van Speybroeck (UGent) and Pascal Van Der Voort (UGent)

(2023) SMALL. 19(46).
Add to list
- Journal Article
- A1
- open access
A survey on zeolite synthesis and the crystallization process : mechanism of nucleation and growth steps

Zahra Asgar Pour, Yasser A. Alassmy and Khaled Sebakhy (UGent)

(2023) CRYSTALS. 13(6).
Add to list
- Journal Article
- A1
- open access
Prediction of contact stress in bolted joints using the Polynomial Chaos-Kriging model

Mingpo Zheng (UGent) , Yifei Liu, Can Wang (UGent) , Jianfu Bai (UGent) , Lihua Wang, Zhifeng Liu and Magd Abdel Wahab (UGent)

(2023) ENGINEERING FAILURE ANALYSIS. 154.
Add to list
- Journal Article
- A1
- open access
Nanophotonic chirality transfer to dielectric mie resonators

Ershad Mohammadi, T. V. Raziman and Alberto Curto (UGent)

(2023) NANO LETTERS. 23(9). p.3978-3984
Add to list
- Journal Article
- A1
- open access
On the competition between intergranular and transgranular failure within 7xxx AI alloys with tailored microstructures

Sutao Han (UGent) , Matthieu B. Lezaack, Grzegorz Pyka, Nelson Netto, Aude Simar, Magd Abdel Wahab (UGent) and Florent Hannard

(2023) MATERIALS. 16(10).
Add to list
- Journal Article
- A1
- open access
Effect of molar mass and alkyl chain length on the surface properties and biocompatibility of poly(alkylene terephthalate)s for potential cardiovascular applications

Lenny Van Daele (UGent) , Babs Van de Voorde, Robin Colenbier, Lobke De Vos (UGent) , Laurens Parmentier (UGent) , Louis Van der Meeren (UGent) , Andre Skirtach (UGent) , Ruslan Dmitriev (UGent) , Peter Dubruel (UGent) and Sandra Van Vlierberghe (UGent)

(2023) JOURNAL OF MATERIALS CHEMISTRY B. 11(42). p.10158-10173
Add to list
- Journal Article
- A1
- open access
Characterisation of alkali-activated stainless steel slag and blast-furnace slag cements

Saeid Ghorbani (UGent) , Laura Stefanini, Yubo Sun, Brant Walkley, John L. Provis, Geert De Schutter (UGent) and Stijn Matthys (UGent)

(2023) CEMENT & CONCRETE COMPOSITES. 143.
Add to list
- Journal Article
- A1
- open access
Light-triggered mechanical disruption of extracellular barriers by swarms of enzyme-powered nanomotors for enhanced delivery

Juan Fraire (UGent) , Maria Guix, Ana C. Hortelao, Noelia Ruiz-González, Anna C. Bakenecker, Pouria Ramezani (UGent) , Charlotte Hinnekens (UGent) , Félix Sauvage (UGent) , Stefaan De Smedt (UGent) , Kevin Braeckmans (UGent) , et al.

(2023) ACS NANO. 17(8). p.7180-7193
Add to list
- Journal Article
- A1
- open access
Interfacing biology and electronics with memristive materials

Ioulia Tzouvadaki (UGent) , Paschalis Gkoupidenis, Stefano Vassanelli, Shiwei Wang and Themis Prodromakis

(2023) ADVANCED MATERIALS. 35(12).
Add to list
- Journal Article
- A1
- open access
Nano drug-delivery systems for management of AIDS : liposomes, dendrimers, gold and silver nanoparticles

Fateme Davarani Asl, Marziyeh Mousazadeh, Shirinsadat Taji, Abbas Bahmani, Patricia Khashayar (UGent) , Mostafa Azimzadeh and Ebrahim Mostafavi

(2023) NANOMEDICINE. 18(3). p.279-302
Add to list
- Journal Article
- A1
- open access
Rethinking databases : the fib project for a connected data repository

David Fernández‐Ordóñez, Miguel Fernández Ruiz, Nikola Tošić, Roman Wan-Wendner (UGent) and Albert de la Fuente

(2023) STRUCTURAL CONCRETE. 24(4). p.4480-4491
Add to list
- Journal Article
- A1
- open access
A deep neural network approach combined with Findley parameter to predict fretting fatigue crack initiation lifetime

Sutao Han (UGent) , Can Wang (UGent) , Samir Khatir (UGent) , Yong Ling (UGent) , Dagang Wang and Magd Abdel Wahab (UGent)

(2023) INTERNATIONAL JOURNAL OF FATIGUE. 176.
Add to list
- Journal Article
- A1
- open access
Comparative analysis of cooling methods for dynamic infrared thermography (DIRT)-based skin cancer diagnosis

Jan Verstockt, Filip E. F. Thiessen, Isabelle Hoorens (UGent) , Lieve Brochez (UGent) and Gunther Steenackers

(2023) APPLIED SCIENCES-BASEL. 13(18).
Add to list
- Journal Article
- A1
Carbon nitride grafting modification of poly(lactic acid) to maximize UV protection and mechanical properties for packaging applications

Maofan Zhou (UGent) , Gengping Wan, Guizhen Wang, Tom Wieme (UGent) , Mariya Edeleva (UGent) , Ludwig Cardon (UGent) and Dagmar D'hooge (UGent)

(2023) ACS APPLIED MATERIALS & INTERFACES. 15(38). p.45300-45314
Add to list
- Journal Article
- A1
- open access
Hapten/myristoyl functionalized poly(propyleneimine) dendrimers as potent cell surface recruiters of antibodies for mediating innate immune killing

Annemiek Uvyn (UGent) , Marle Elisabeth Jacqueline Vleugels, Bas de Waal, Ahmed Emad Ibrahim Hamouda, Shikha Dhiman, Benoit Louage (UGent) , Lorenzo Albertazzi, Damya Laoui, E. W. Meijer and Bruno De Geest (UGent)

(2023) ADVANCED MATERIALS. 35(47).
Add to list
- Journal Article
- A1
- open access
Responsive superplasticizers for active rheology control of cementitious materials

Geert De Schutter (UGent) , Metwally Muhammad, Karel Lesage (UGent) and Richard Hoogenboom (UGent)

(2023) CEMENT AND CONCRETE RESEARCH. 165.
Add to list
- Journal Article
- A1
- open access
Nitrogen oxidation in a multi-pin plasma system in the presence and absence of a plasma/liquid interface

Moazameh Adhami Sayad Mahaleh (UGent) , Mehrnoush Narimisa (UGent) , Anton Nikiforov (UGent) , Mikhail Gromov (UGent) , Yury Gorbanev, Rim Bitar (UGent) , Rino Morent (UGent) and Nathalie De Geyter (UGent)

(2023) APPLIED SCIENCES-BASEL. 13(13).
Add to list
- Journal Article
- A1
Influence of core type and shell thickness on avian-inspired structural colors produced from melanin nanoparticle assemblies

Saranshu Singla, Zepeng Yang, Anvay Patil, Hao Guo, Bram Vanthournout (UGent) , K. Zin Htut, Matthew Shawkey (UGent) , Mesfin Tsige and Ali Dhinojwala

(2023) ACS APPLIED MATERIALS & INTERFACES. 15(38). p.45229-45238
Add to list
- Journal Article
- A1
- open access
Ins and outs of the ankle syndesmosis from a 2D to 3D CT perspective

Thibaut Dhont, Manu Huyghe, Matthias Peiffer (UGent) , Noortje Hagemeijer, Bedri Karaismailoglu, Nicola Krahenbuhl, Emmanuel Audenaert (UGent) and Arne Burssens (UGent)

(2023) APPLIED SCIENCES-BASEL. 13(19).
Add to list
- Journal Article
- A1
- open access
Monitoring magnetic nanoparticle clustering and immobilization with thermal noise magnetometry using optically pumped magnetometers

Katrijn Everaert, Tilmann Sander, Rainer Körber, Norbert Löwa, Bartel Van Waeyenberge (UGent) , Jonathan Leliaert (UGent) and Frank Wiekhorst

(2023) NANOSCALE ADVANCES. 5(8). p.2341-2351
Add to list
- Journal Article
- A1
- open access
Layered manganese oxides structures : micro‐Raman and selected mobile Raman spectroscopic studies

Eva Vermeersch (UGent) , Filip Košek, Johan De Grave (UGent) , Jan Jehlička and Anastasia Rousaki (UGent)

(2023) JOURNAL OF RAMAN SPECTROSCOPY. 55(2). p.246-262
Add to list
- Journal Article
- A1
- open access
Plasmonic semiconductors : materials, tunability and applications

Yujie Guo (UGent) , Zhenyu Xu, Alberto Curto (UGent) , Yu-Jia Zeng and Dries Van Thourhout (UGent)

(2023) PROGRESS IN MATERIALS SCIENCE. 138.
Add to list
- Journal Article
- A1
On the use of a zoom lens for remote Raman measurements : application in cultural heritage research

Peter Vandenabeele (UGent) , Catarina Pereira Miguel, Anastasia Rousaki (UGent) , Silvia Bottura Scardina, Mathilda Larsson‐Coutinho, Miriam Pressato and António Candeias

(2023) JOURNAL OF RAMAN SPECTROSCOPY. 54(1). p.68-75
Add to list
- Journal Article
- A1
- open access
Closed-form analytical solutions for predicting stress transfers and thermo-elastic properties of short fiber composites

Ehsan Rashidinejad (UGent) , Hossein Ahmadi (UGent) , Mohammad Hajikazemi (UGent) and Wim Van Paepegem (UGent)

(2023) MECHANICS OF ADVANCED MATERIALS AND STRUCTURES. 30(23). p.4731-4751
Add to list
- Journal Article
- A1
- open access
Cost–benefit analysis of fire protection in buildings : application of a present net value approach

Thomas Gernay, Shuna Ni, David Unobe, Andrea Lucherini (UGent) , Ranjit Kumar Chaudhary (UGent) and Ruben Van Coile (UGent)

(2023) FIRE TECHNOLOGY. 59(4). p.2023-2053
Add to list
- Journal Article
- A1
Comparison of printability and mechanical properties of rigid and flexible fiber-reinforced 3D printed cement-based materials

Yi Zhang (UGent) , Yanmei Zhu, Qiang Ren, Bei He, Zhengwu Jiang, Kim Van Tittelboom (UGent) and Geert De Schutter (UGent)

(2023) CONSTRUCTION AND BUILDING MATERIALS. 400.
Add to list
- Journal Article
- A1
- open access
Recommendation of RILEM TC 271-ASC : new accelerated test procedure for the assessment of resistance of natural stone and fired-clay brick units against salt crystallization

B. Lubelli, I. Rörig-Daalgard, A. M. Aguilar, M. Aškrabić, K. Beck, C. Bläuer, Veerle Cnudde (UGent) , A. M. D’Altri, Hannelore Derluyn (UGent) , J. Desarnaud, et al.

(2023) MATERIALS AND STRUCTURES. 56(5).
Add to list
- Journal Article
- A1
- open access
Effect of stress triaxiality on the hydrogen embrittlement micromechanisms in a pipeline steel evaluated by fractographic analysis

Margo Cauwels (UGent) , Robin Depraetere (UGent) , Wim De Waele (UGent) , Stijn Hertelé (UGent) , Kim Verbeken (UGent) and Tom Depover (UGent)

(2023) MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 886.
Add to list
- Journal Article
- A1
- open access
Successful batch and continuous lyophilization of mRNA LNP formulations depend on cryoprotectants and ionizable lipids

Alexander Lamoot, Joris Lammens (UGent) , Emily De Lombaerde (UGent) , Zifu Zhong (UGent) , Mark Gontsarik (UGent) , Yong Chen (UGent) , Thomas De Beer (UGent) and Bruno De Geest (UGent)

(2023) BIOMATERIALS SCIENCE. 11(12). p.4327-4334
Add to list
- Journal Article
- A1
- open access
Prediction of the effect of shot peening residual stress on fretting fatigue behaviour

Can Wang (UGent) , Kaifa Fan (UGent) , Chao Li (UGent) and Magd Abdel Wahab (UGent)

(2023) INTERNATIONAL JOURNAL OF FATIGUE. 176.
Add to list
- Journal Article
- A1
- open access
High capacity, silica-based anion-exchange nanofiber membranes for the selective recovery of lactic acid

Bianca Swanckaert (UGent) , Nele Vande Velde, Eva Loccufier (UGent) , Klaartje De Buysser (UGent) , Luiza Bonin (UGent) and Karen De Clerck (UGent)

(2023) SUSTAINABLE MATERIALS AND TECHNOLOGIES. 38.
Add to list
- Journal Article
- A1
- open access
Quantitative analysis of the correlation between geometric parameters of pits and stress concentration factors for a plate subject to uniaxial tensile stress

Farid Mehri Sofiani (UGent) , S. Chaudhuri, Seyed Ahmad Elahi (UGent) , Kris Hectors (UGent) and Wim De Waele (UGent)

(2023) THEORETICAL AND APPLIED FRACTURE MECHANICS. 127.
Add to list
- Journal Article
- A1
- open access
A pipelining-based heterogeneous scheduling and energy-throughput optimization scheme for CNNs leveraging apache TVM

Delia Velasco-Montero, Bart Goossens (UGent) , Jorge Fernández-Berni, Ángel Rodríguez-Vázquez and Wilfried Philips (UGent)

(2023) IEEE ACCESS. 11. p.35007-35021
Add to list
- Journal Article
- A1
- open access
Towards material and process agnostic features for the classification of pore types in metal additive manufacturing

Mathieu Vandecasteele (UGent) , Rob Heylen, Domenico Iuso, Aditi Thanki, Wilfried Philips (UGent) , Ann Witvrouw, Dries Verhees and Brian Booth (UGent)

(2023) MATERIALS & DESIGN. 227.
Add to list
- Journal Article
- A1
- open access
Uncovering the white etching area and crack formation mechanism in bearing steel

Ksenija Nikolić (UGent) , Vitoria Mattos Ferreira, Loïc Malet, Tom Depover (UGent) , Kim Verbeken (UGent) and Roumen Petrov (UGent)

(2023) MATERIALS CHARACTERIZATION. 197.
Add to list
- Journal Article
- A1
- open access
Open-access experiment dataset for fatigue damage accumulation and life prediction models

Kris Hectors (UGent) , Dennis Vanspeybrouck, Jelle Plets (UGent) , Quinten Bouckaert and Wim De Waele (UGent)

(2023) METALS. 13(3).
Add to list
- Journal Article
- A1
- open access
A review on the weldability of additively manufactured aluminium parts by fusion and solid-state welding processes

Rafael Gomes Nunes Silva (UGent) , Koen Faes, Wim De Waele (UGent) , Aude Simar, Wim Verlinde, Matthieu Lezaack, Wout Sneyers and Julius Arnhold

(2023) METALS. 13(10). p.1724-1760
Add to list
- Journal Article
- A1
- open access
Charge carrier dynamics in colloidally synthesized monolayer MoX2 nanosheets

Chandra Sekhar Mutyala (UGent) , Gabriele Pippia, Ivo Tanghe (UGent) , Beatriz Martín-García, Anastasia Rousaki (UGent) , Peter Vandenabeele (UGent) , Pieter Schiettecatte (UGent) , Iwan Moreels (UGent) and Pieter Geiregat (UGent)

(2023) JOURNAL OF PHYSICAL CHEMISTRY LETTERS. 14(10). p.2620-2626
Add to list
- Journal Article
- A1
Photothermal nanofibers enable macromolecule delivery in unstimulated human T cells

Dominika Berdecka (UGent) , Manon Minsart (UGent) , Tao Lu (UGent) , Deep Punj (UGent) , Riet De Rycke (UGent) , Mina Nikolić (UGent) , Eduardo Bolea Fernandez (UGent) , Frank Vanhaecke (UGent) , Ranhua Xiong (UGent) , Stefaan De Smedt (UGent) , et al.

(2023) APPLIED MATERIALS TODAY. 35.
Add to list
- Journal Article
- A1
CO2-driven nebulization of pH-sensitive supramolecular polymers for intraperitoneal hydrogel formation and the treatment of peritoneal metastasis

Helena Braet, Peter-Paul Fransen, Remco Mariën, Giovanna Lollo, Wim Ceelen (UGent) , Chris Vervaet (UGent) , Lieve Balcaen (UGent) , Frank Vanhaecke (UGent) , Christian Vanhove (UGent) , Stefan van der Vegte, et al.

(2023) ACS APPLIED MATERIALS & INTERFACES. 15(42). p.49022-49034
Add to list
- Journal Article
- A1
- open access
Effect of sodium sulfate activation on the early age behaviour and microstructure development of hybrid cementitious systems containing Portland cement, and blast furnace slag

Juan Manuel Etcheverry (UGent) , Yury Villagran Zaccardi (UGent) , Philip Van den Heede (UGent) , Vincent Hallet and Nele De Belie (UGent)

(2023) CEMENT & CONCRETE COMPOSITES. 141.
Add to list
- Journal Article
- A2
- open access
Platinum nanoclusters made by gas-diffusion electrocrystallization (GDEx) as electrocatalysts for methanol oxidation

Omar Martinez-Mora, Luis F. Leon-Fernandez, Milica Velimirovic Fanfani (UGent) , Frank Vanhaecke (UGent) , Kristof Tirez, Jan Fransaer and Xochitl Dominguez-Benetton

(2023) MATERIALS ADVANCES. 4(23). p.6183-6191
Add to list
- Journal Article
- A1
Gold nanoparticle delivery to solid tumors by macrophage depletion, hypoxia inhibition, and collagen degradation

Christy Maksoudian, Mukaddes Izci, Robbe Salembier, Irati Perez Gilabert, Filipa Roque Gonçalves, Carla Rios Luci, Eduardo Bolea Fernandez (UGent) , Frank Vanhaecke (UGent) , Bella B. Manshian and Stefaan J. Soenen

(2023) ACS APPLIED NANO MATERIALS. 6(9). p.7605-7618
Add to list
- Journal Article
- A1
- open access
Development of a calcium sulfoaluminate-Portland cement binary system for twin-pipe 3D concrete printing

Yaxin Tao (UGent) , Manu K Mohan (UGent) , A.V. Rahul, Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2023) CEMENT & CONCRETE COMPOSITES. 138.
Add to list
- Journal Article
- A1
Modified equation of shear strength with respect to saturation

Wenjing Tian (UGent) , Herman Peiffer (UGent) , Benny Malengier (UGent) , Gang Liu and Liangliang Cheng

(2023) APPLIED SCIENCES-BASEL. 13(7).
Add to list
- Journal Article
- A1
- open access
The evolution of the rheological behavior of hydrating cement systems : combining constitutive modeling with rheometry, calorimetry and mechanical analyses

Luiza Rodrigues Meira De Miranda (UGent) , Flavio H. Marchesini (UGent) , Karel Lesage (UGent) and Geert De Schutter (UGent)

(2023) CEMENT AND CONCRETE RESEARCH. 164.
Add to list
- Journal Article
- A1
- open access
The role of phonons in switchable MOFs : a model material perspective

Alexander Hoffman (UGent) , Irena Senkovska, Leila Abylgazina, Volodymyr Bon, Veronika Grzimek, Anna Maria Dominic, Margarita Russina, Marvin A. Kraft, Inez Weidinger, Wolfgang G. Zeier, et al.

(2023) JOURNAL OF MATERIALS CHEMISTRY A. 11(28). p.15286-15300
Add to list
- Journal Article
- A1
- open access
Viscosity experiments of slag-spinel suspensions : the effect of volume fraction, particle size, and shear rate

Olivier Vergote (UGent) , Inge Bellemans (UGent) , Amy Van den Bulck, Maksym Shevchenko, Roman Starykh, Evgueni Jak and Kim Verbeken (UGent)

(2023) JOURNAL OF RHEOLOGY. 67(6). p.1159-1174
Add to list
- Journal Article
- A1
- open access
Confirming debonding of non-metallic inclusions as an important factor in damage initiation in bearing steel

Ksenija Nikolić (UGent) , Jelle De Wispelaere, Gopalakrishnan Ravi, Stijn Hertelé (UGent) , Tom Depover (UGent) , Kim Verbeken (UGent) and Roumen Petrov (UGent)

(2023) METALS. 13(6).
Add to list
- Journal Article
- A1
- open access
Bridging the green gap : monochromatic InP-based quantum-dot-on-chip LEDs with over 50% color conversion efficiency

Bega Karadza, Pieter Schiettecatte (UGent) , Hannes Van Avermaet (UGent) , Leila Mingabudinova, Luca Giordano (UGent) , Dobromil Respekta (UGent) , Yuhao Deng (UGent) , Igor Nakonechnyi, Kim De Nolf, Willem Walravens, et al.

(2023) NANO LETTERS. 23(12). p.5490-5496
Add to list
- Journal Article
- A1
- open access
Mechanical load induced hydrogen charging of retained austenite in quenching and partitioning (Q&P) steel

Simon Vander Vennet, Silvia Leitner, Vsevolod Razumovskiy, Werner Ecker, Tom Depover (UGent) and Kim Verbeken (UGent)

(2023) INTERNATIONAL JOURNAL OF HYDROGEN ENERGY. 48(6). p.2428-2441
Add to list
- Journal Article
- A1
- open access
Production of calcium carbonate-precipitating biomass powder as self-healing additive in concrete and performance evaluation in mortar

Xuejiao Zhu, Myrsini Sakarika (UGent) , Ramon Ganigué (UGent) , Kim Van Tittelboom (UGent) , Yusuf Çağatay Erşan, Nico Boon (UGent) and Nele De Belie (UGent)

(2023) CEMENT & CONCRETE COMPOSITES. 138.
Add to list
- Journal Article
- A1
- open access
Fatigue damage and life evaluation of thick bi‐material double strap joints for use in marine applications

Rahul Iyer Kumar (UGent) , Pankaj Jaiswal and Wim De Waele (UGent)

(2022) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. 45(7). p.2099-2111
Add to list
- Journal Article
- A1
Investigation of the effect of carbon on the reversible hydrogen trapping behavior in lab-cast martensitic Fe-C steels

Margot Pinson, Lisa Claeys (UGent) , H. Springer, Vitaliy Bliznuk (UGent) , Tom Depover (UGent) and Kim Verbeken (UGent)

(2022) MATERIALS CHARACTERIZATION. 184.
Add to list
- Journal Article
- A1
Surface reactions between LiHMDS, TMA and TMP leading to deposition of amorphous lithium phosphate

Andreas Werbrouck (UGent) , Felix Mattelaer (UGent) , Arpan Dhara (UGent) , Mikko Nisula (UGent) , Matthias Minjauw (UGent) , Frans Munnik, Jolien Dendooven (UGent) and Christophe Detavernier (UGent)

(2022) JOURNAL OF MATERIALS CHEMISTRY A. 10(7). p.3543-3551
Add to list
- Journal Article
- A1
Numerical analysis of crack propagation in fretting fatigue specimen repaired by stop hole method

Qingming Deng, Xiaochun Yin, Dagang Wang and Magd Abdel Wahab (UGent)

(2022) INTERNATIONAL JOURNAL OF FATIGUE. 156.
Add to list
- Journal Article
- A1
- open access
Strongly enhanced growth of high-temperature superconducting films on an advanced metallic template

Mukarram Z. Khan, Elmeri Rivasto, Hannes Rijckaert (UGent) , Yue Zhao, Maciej O. Liedke, Maik Butterling, Andreas Wagner, Isabel Van Driessche (UGent) , Hannu Huhtinen and Petriina Paturi

(2022) CRYSTAL GROWTH & DESIGN. 22(4). p.2097-2104
Add to list
- Journal Article
- A1
Relationship between sorptivity coefficients of concrete as calculated from the evolution of water uptake versus t0.5 or t0.25

Yury Villagran Zaccardi (UGent) , Natalia Mariel Alderete (UGent) , Alejandra Benítez, María F. Carrasco, Patricio Corallo, Raúl López and Cristian Rios

(2022) CONSTRUCTION AND BUILDING MATERIALS. 342(Part B).
Add to list
- Journal Article
- A1
- open access
An evaluation of nanoparticle distribution in solution-derived YBa2Cu3O7−δ nanocomposite thin films by XPS depth profiling in combination with TEM analysis

Els Bruneel (UGent) , Hannes Rijckaert (UGent) , Javier Diez Sierra, Klaartje De Buysser (UGent) and Isabel Van Driessche (UGent)

(2022) CRYSTALS. 12(3).
Add to list
- Journal Article
- A1
The addition of aluminum to brittle martensitic steels in order to increase ductility by forming a grain boundary ferritic microfilm

Margot Pinson, Saurubh M. Das, Hauke Springer, Tom Depover (UGent) and Kim Verbeken (UGent)

(2022) SCRIPTA MATERIALIA. 213.
Add to list
- Journal Article
- A1
Hydrogen stress cracking resistance and hydrogen transport properties of ASTM A508 grade 4N

Esteban Rodoni, Andreas Viereckl, Zakaria Quadir, Aaron Dodd, Kim Verbeken (UGent) , Tom Depover (UGent) and Mariano Iannuzzi

(2022) CORROSION. 78(1). p.96-111
Add to list
- Journal Article
- A1
The effect of Nb on the hydrogen embrittlement susceptibility of Q&P steel under static and dynamic loading

Florian Vercruysse, Lisa Claeys (UGent) , Tom Depover (UGent) , Patricia Verleysen (UGent) , Roumen Petrov (UGent) and Kim Verbeken (UGent)

(2022) MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 852.
Add to list
- Journal Article
- A1
- open access
Does CO2 oxidize Ni catalysts? A quick X-ray absorption spectroscopy answer

Valentijn De Coster, Nadadur Veeraraghavan Srinath, Parviz Yazdani (UGent) , Hilde Poelman (UGent) and Vladimir Galvita (UGent)

(2022) JOURNAL OF PHYSICAL CHEMISTRY LETTERS. 13(34). p.7947-7952
Add to list
- Journal Article
- A1
- open access
Cleaning data with selection rules

Toon Boeckling (UGent) , Guy De Tré (UGent) and Antoon Bronselaer (UGent)

(2022) IEEE ACCESS. 10. p.125212-125229
Add to list
- Journal Article
- A1
- open access
Role of the deposition distance on nanorod growth and flux pinning in BaZrO3-doped YBa2Cu3O6+x thin films : implications for superconducting tapes

Moe Moe Aye, Elmeri Rivasto, Hannes Rijckaert (UGent) , Sari Granroth, Heikki Palonen, Hannu Huhtinen, Isabel Van Driessche (UGent) and Petriina Paturi

(2022) ACS APPLIED NANO MATERIALS. 5(12). p.18159-18167
Add to list
- Journal Article
- A2
Plasma-assisted growth of two-dimensional Ga2O3/Gas heterophases on liquid alloy substrate for nanoelectronic applications

Mohammad Karbalaei Akbari (UGent) and Serge Zhuiykov (UGent)

(2022) MATERIALS SCIENCE FORUM. 1075. p.49-55
Add to list
- Journal Article
- A1
- open access
Selection of magnet wire topologies with reduced AC losses for the windings of electric drivetrains

Ahmed Selema (UGent) , Mehmet Güleç (UGent) , Mohamed Ibrahim (UGent) , Ruud Sprangers and Peter Sergeant (UGent)

(2022) IEEE ACCESS. 10. p.121531-121546
Add to list
- Journal Article
- A1
- open access
Fluorimetry in the strong-coupling regime : from a fundamental perspective to engineering new tools for tracing and marking materials and objects

Mohamed Hatifi, Dimitrije Mara, Bojana Bokic, Rik Van Deun (UGent) , Brian Stout, Emmanuel Lassalle, Branko Kolaric and Thomas Durt

(2022) APPLIED SCIENCES-BASEL. 12(18).
Add to list
- Journal Article
- A1
Synthesis and characterization of an intermediate for C-S-H structure tailoring

Zheyu Zhu, Zhongping Wang, Linglin Xu, Yue Zhou, Yuting Chen, Kai Wu and Geert De Schutter (UGent)

(2022) CEMENT AND CONCRETE RESEARCH. 160.
Add to list
- Journal Article
- A1
Comparative study on the role of PAM and PANA on the property of fresh cement paste

Linan Gu, Tiejun Liu, Kai Wu, Zhenghong Yang, Zhaoyin Wen, Zhenlei Zhang, Geert De Schutter (UGent) and Haoxin Li

(2022) CEMENT & CONCRETE COMPOSITES. 133.
Add to list
- Journal Article
- A1
- open access
Length-dependent symmetry in narrow chevron-like graphene nanoribbons

R. S. Koen Houtsma, Mihaela Enache, Remco Havenith (UGent) and Meike Stöhr

(2022) NANOSCALE ADVANCES. 4(17). p.3531-3536
Add to list
- Journal Article
- A1
- open access
Effect of chemical substitution on the construction of boroxine-based supramolecular crystalline polymers featuring B←N dative bonds

Subhrajyoti Bhandary (UGent) , Rahul Shukla and Kristof Van Hecke (UGent)

(2022) CRYSTENGCOMM. 24(9). p.1695-1699
Add to list
- Journal Article
- A1
- open access
Modelling structural properties of cyanine dye nanotubes at coarse-grained level

Ilias Patmanidis, Paulo C. T. Souza, Selim Sami, Remco Havenith (UGent) , Alex H. de Vries and Siewert J. Marrink

(2022) NANOSCALE ADVANCES. 4(14). p.3033-3042
Add to list
- Journal Article
- A1
- open access
Toward detection of the molecular parity violation in chiral Ru(acac)3 and Os(acac)3

Marit R. Fiechter, Pi A. B. Haase, Nidal Saleh, Pascale Soulard, Benoît Tremblay, Remco Havenith (UGent) , Rob G. E. Timmermans, Peter Schwerdtfeger, Jeanne Crassous, Benoît Darquié, et al.

(2022) JOURNAL OF PHYSICAL CHEMISTRY LETTERS. 13(42). p.10011-10017
Add to list
- Journal Article
- A1
- open access
Photoaligned liquid crystal devices with switchable hexagonal diffraction patterns

Inge Nys (UGent) , Brecht Berteloot and Kristiaan Neyts (UGent)

(2022) MATERIALS. 15(7).
Add to list
- Journal Article
- A1
The effect of an Al-induced ferritic microfilm on the hydrogen embrittlement mechanism in martensitic steels

Margot Pinson, Hauke Springer, Kim Verbeken (UGent) and Tom Depover (UGent)

(2022) MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 851.
Add to list
- Journal Article
- A1
On the role of the stacking fault energy in the beneficial effect of aluminium on the hydrogen embrittlement sensitivity of twinning-induced plasticity (TWIP) steel

Lisa Claeys (UGent) , Tom Depover (UGent) and Kim Verbeken (UGent)

(2022) MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 855.
Add to list
- Journal Article
- A1
Dynamic effects during the capillary rise of fluids in cylindrical tubes

Stephan B. Lunowa, Arjen Mascini (UGent) , Carina Bringedal, Tom Bultreys (UGent) , Veerle Cnudde (UGent) and Iuliu Sorin Pop

(2022) LANGMUIR. 38(5). p.1680-1688
Add to list
- Journal Article
- A1
- open access
Monoalkyl phosphinic acids as ligands in nanocrystal synthesis

Evert Dhaene, Rohan Pokratath, Olivia Aalling-Frederiksen, Kirsten M. Ø. Jensen, Philippe Smet (UGent) , Klaartje De Buysser (UGent) and Jonathan De Roo

(2022) ACS NANO. 16(5). p.7361-7372
Add to list
- Journal Article
- A1
- open access
A variational approach for accurate prediction of stress and displacement fields and thermo-elastic constants in general symmetric laminates containing ply cracking and delamination under general triaxial loading

Mohammad Hajikazemi (UGent) , Hossein Ahmadi (UGent) , L. N. McCartney and Wim Van Paepegem (UGent)

(2022) INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES. 254-255.
Add to list
- Journal Article
- A1
- open access
The effect of carbon fiber content on physico-mechanical properties of recycled poly(ethylene terephthalate) composites additively manufactured with fused filament fabrication

Amalia Katalagarianakis, Babs Van de Voorde, Nele Pien (UGent) , Efstratios Polyzos, Ivica Duretek, Clemens Holzer, Ludwig Cardon (UGent) , Katrien V. Bernaerts, Danny Van Hemelrijck, Sandra Van Vlierberghe (UGent) , et al.

(2022) ADDITIVE MANUFACTURING. 60(Part A).
Add to list
- Journal Article
- A1
- open access
Model-based control of iron- and copper oxide particle distributions in porous γ-Al2O3 microspheres through careful tuning of the interactions during impregnation

Bram Seynnaeve, Jeroen Lauwaert (UGent) , Pieter Vermeir (UGent) , Pascal Van Der Voort (UGent) and An Verberckmoes (UGent)

(2022) MATERIALS CHEMISTRY AND PHYSICS. 276.
Add to list
- Journal Article
- A1
- open access
Durability of self-healing cementitious systems with encapsulated polyurethane evaluated with a new pre-standard test method

Giovanni Anglani, Tim Van Mullem (UGent) , Jean-Marc Tulliani, Kim Van Tittelboom (UGent) , Nele De Belie (UGent) and Paola Antonaci

(2022) MATERIALS AND STRUCTURES. 55(5).
Add to list
- Journal Article
- A1
Modeling structural colors from disordered one-component colloidal nanoparticle-based supraballs using combined experimental and simulation techniques

Anvay Patil, Christian M. Heil, Bram Vanthournout (UGent) , Saranshu Singla, Ziying Hu, Jan Ilavsky, Nathan C. Gianneschi, Matthew Shawkey (UGent) , Sunil K. Sinha, Arthi Jayaraman, et al.

(2022) ACS MATERIALS LETTERS. 9(4). p.1848-1854
Add to list
- Journal Article
- A1
- open access
Multi-scale modeling of plastic waste gasification : opportunities and challenges

Sepehr Madanikashani (UGent) , Laurien Vandewalle (UGent) , Steven De Meester (UGent) , Juray De Wilde and Kevin Van Geem (UGent)

(2022) MATERIALS. 15(12).
Add to list
- Journal Article
- A1
Topology optimization for electromagnetics : a survey

Francesco Lucchini, Riccardo Torchio, Vincenzo Cirimele, Piergiorgio Alotto and Paolo Bettini

(2022) IEEE ACCESS. 10. p.98593-98611
Add to list
- Journal Article
- A1
- open access
Effect of solid volume fraction on the magnetorheological response of nano-Fe3O4 incorporated cementitious paste

Dengwu Jiao, Mert Yücel Yardimci (UGent) , Robin De Schryver (UGent) , Karel Lesage (UGent) , Caijun Shi and Geert De Schutter (UGent)

(2022) JOURNAL OF MATERIALS IN CIVIL ENGINEERING. 34(11).
Add to list
- Journal Article
- A1
- open access
Slope stability analysis method of unsaturated soil slopes considering pore gas pressure caused by rainfall infiltration

Wenjing Tian (UGent) , Herman Peiffer (UGent) , Benny Malengier (UGent) , Song Xue and Zhongtian Chen (UGent)

(2022) APPLIED SCIENCES-BASEL. 12(21).
Add to list
- Journal Article
- A1
- open access
How reproducible are surface areas calculated from the BET equation?

Johannes W. M. Osterrieth, James Rampersad, David Madden, Nakul Rampal, Luka Skoric, Bethany Connolly, Mark D. Allendorf, Vitalie Stavila, Jonathan L. Snider, Rob Ameloot, et al.

(2022) ADVANCED MATERIALS. 34(27).
Add to list
- Journal Article
- A1
Lysolipid-inspired amphiphilic polymer nanostructures : implications for drug delivery

Hoang Nam Nguyen, Metwally Muhammad and Chun-Jen Huang

(2022) ACS APPLIED NANO MATERIALS. 5(1). p.107-112
Add to list
- Journal Article
- A1
Hydrophobic melanin via post-synthetic modification for controlled self-assembly

Xuhao Zhou, Shengyi Su, Bram Vanthournout (UGent) , Ziying Hu, Florencia A. Son, Kexin Zhang, Zofia E. Siwicka, Xinyi Gong, Navjit Paul, Karthikeyan Gnanasekaran, et al.

(2022) ACS NANO. 16(11). p.19087-19095
Add to list
- Journal Article
- A1
- open access
Optical and scintillation properties of record-efficiency CdTe nanoplatelets toward radiation detection applications

Abhinav Anand, Matteo L. Zaffalon, Francesca Cova, Valerio Pinchetti, Ali Khan (UGent) , Francesco Carulli, Rosaria Brescia, Francesco Meinardi, Iwan Moreels (UGent) and Sergio Brovelli

(2022) NANO LETTERS. 22(22). p.8900-8907
Add to list
- Journal Article
- A1
- open access
A colloidal route to semiconducting tungsten disulfide nanosheets with monolayer thickness

Gabriele Pippia, Diem Van Hamme (UGent) , Beatriz Martín-García, Mirko Prato and Iwan Moreels (UGent)

(2022) NANOSCALE. 14(42). p.15859-15868
Add to list
- Journal Article
- A1
- open access
Area-independence of the biexciton oscillator strength in CdSe colloidal nanoplatelets

Carmelita Rodà, Pieter Geiregat (UGent) , Alessio Di Giacomo, Iwan Moreels (UGent) and Zeger Hens (UGent)

(2022) NANO LETTERS. 22(23). p.9537-9543
Add to list
- Journal Article
- A1
- open access
A novel version of grey wolf optimizer based on a balance function and its application for hyperparameters optimization in deep neural network (DNN) for structural damage identification

Thanh Cuong Le, Minh Hoang Le, Thanh Sang To, Samir Khatir (UGent) , Seyedali Mirjalili and Magd Abdel Wahab (UGent)

(2022) ENGINEERING FAILURE ANALYSIS. 142.
Add to list
- Journal Article
- A1
A 2D numerical modelling of plasticity induced crack closure on MT specimens

Carlos Esteves, Daniel F. O. Braga, dr. ir. Behzad Vasheghani Farahani (UGent) , Pedro M.G.P. Moreira, Ricardo Baptista and Virginia Infante

(2022) THEORETICAL AND APPLIED FRACTURE MECHANICS. 122.
Add to list
- Journal Article
- A1
- open access
Fracture toughness determination on an SCB specimen by meshless methods

Farid Mehri Sofiani (UGent) , dr. ir. Behzad Vasheghani Farahani (UGent) and Jorge Belinha

(2022) APPLIED SCIENCES-BASEL. 12(5).
Add to list
- Journal Article
- A1
Advancement on optical methods in stress dead-zone characterisation and SIF evaluation

dr. ir. Behzad Vasheghani Farahani (UGent) , Frederico Direito, Pedro J. Sousa, Francisco Q. Melo, Paulo J. Tavares, Virginia Infante and Pedro M.G.P. Moreira

(2022) ENGINEERING FAILURE ANALYSIS. 140.
Add to list
- Journal Article
- A1
- open access
Titanium carboxylate molecular layer deposited hybrid films as protective coatings for lithium-ion batteries

Sofie Vandenbroucke (UGent) , Lowie Henderick (UGent) , Louis L. De Taeye, Jin Li (UGent) , Karolien Jans, Philippe M. Vereecken, Jolien Dendooven (UGent) and Christophe Detavernier (UGent)

(2022) ACS APPLIED MATERIALS & INTERFACES. 14. p.24908-24918
Add to list
- Journal Article
- A1
- open access
Towards the biomimetic design of hollow fiber membrane bioreactors for bioartificial organs and tissue engineering : a micro-computed tomography (μCT) approach

Giuseppe Falvo D'Urso Labate, Thomas De Schryver, Francesco Baino, Charlotte Debbaut (UGent) , Gionata Fragomeni, Chiara Vitale-Brovarone, Luc Van Hoorebeke (UGent) , Patrick Segers (UGent) , Matthieu Boone (UGent) and Gerardo Catapano

(2022) JOURNAL OF MEMBRANE SCIENCE. 650.
Add to list
- Journal Article
- A1
- open access
Nanoporous silica-alumina films fabricated on silicon photonic chips for selective ammonia sensing

Yanlu Li (UGent) , Claudio Bellani, Nebiyu Adello Yebo (UGent) , Jolien Dendooven (UGent) , Jin Won Seo, Christophe Detavernier (UGent) , Roel Baets (UGent) , Johan A. Martens and Sreeprasanth Pulinthanathu Sree

(2022) ACS APPLIED NANO MATERIALS. 5(11). p.16126-16135
Add to list
- Journal Article
- A1
- open access
Development of a concept and basis for the DEMO diagnostic and control system

Wolfgang Biel (UGent) , M. Ariola, I. Bolshakova, K.J. Brunner, M. Cecconello, I. Duran, Th. Franke, L. Giacomelli, L. Giannone, F. Janky, et al.

(2022) FUSION ENGINEERING AND DESIGN. 179.
Add to list
- Journal Article
- A1
Prediction of the peak load and crack initiation energy of dynamic brittle fracture in X70 steel pipes using an improved artificial neural network and extended Finite Element Method

Abdelmoumin Oulad Brahim, Idir Belaidi, Noureddine Fahem, Samir Khatir (UGent) , Seyedali Mirjalili and Magd Abdel Wahab (UGent)

(2022) THEORETICAL AND APPLIED FRACTURE MECHANICS. 122.
Add to list
- Journal Article
- A1
Effect of residual stress induced by ultrasonic surface rolling on fretting fatigue behaviors of Ti-6Al-4V alloy

Kaifa Fan, Daoxin Liu, Xiaohua Zhang, Dan Liu, Weidong Zhao, Jing Yang, Amin Ma, Mengyao Li, Yanan Qi, Junfeng Xiang, et al.

(2022) ENGINEERING FRACTURE MECHANICS. 259.
Add to list
- Journal Article
- A1
Influence of internal volumetric imperfections on the tearing resistance curve of welded single edge notched tension (SENT) specimens

Vitor Soares Rabelo Adriano, Wim De Waele (UGent) , Eleine Cardon, Matthieu Boone (UGent) and Stijn Hertelé (UGent)

(2022) ENGINEERING FRACTURE MECHANICS. 259.
Add to list
- Journal Article
- A1
- open access
Capillary imbibition in cementitious materials : effect of salts and exposure condition

Laurena De Brabandere (UGent) , Natalia Mariel Alderete (UGent) and Nele De Belie (UGent)

(2022) MATERIALS. 15(4).
Add to list
- Journal Article
- A1
- open access
An explosive driven shock tube-based laboratory scale test for combined blast and fragment impact loading

Oussama Atoui, Georgios Kechagiadakis, Abdelhafidh Moumen, Azer Maazoun (UGent) , Bachir Belkassem, Lincy Pyl and David Lecompte

(2022) APPLIED SCIENCES-BASEL. 12(14).
Add to list
- Conference Paper
- C1
- open access
The role of equipment flexibility in Overall Equipment Effectiveness (OEE)-driven process improvement

Lauren Van De Ginste (UGent) , El-Houssaine Aghezzaf (UGent) and Johannes Cottyn (UGent)

(2022) PROCEDIA CIRP. 107. p.289-294
Add to list
- Journal Article
- A1
- open access
3D correlative imaging of lithium ion concentration in a vertically oriented electrode microstructure with a density gradient

Chun Huang, Matthew D. Wilson, Kosuke Suzuki, Enzo Liotti, Thomas Connolley, Oxana V. Magdysyuk, Stephen Collins, Frederic Van Assche (UGent) , Matthieu Boone (UGent) , Matthew C. Veale, et al.

(2022) ADVANCED SCIENCE. 9(16).
Add to list
- Journal Article
- A1
Plasma-enhanced elemental enrichment of liquid metal interfaces : towards realization of GaS nanodomains in two-dimensional Ga2O3

Mohammad Karbalaei Akbari (UGent) , Francis Verpoort and Serge Zhuiykov (UGent)

(2022) APPLIED MATERIALS TODAY. 27.
Add to list
- Journal Article
- A1
Interaction between surface breaking and embedded circumferential flaws in tension loaded (pressurized) steel pipes

Kaveh Samadian (UGent) , Vitor Soares Rabelo Adriano, Otto Jan Huising, Wim De Waele (UGent) and Stijn Hertelé (UGent)

(2022) INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING. 198.
Add to list
- Journal Article
- A1
Contact and slip behaviors of main cable of the long-span suspension bridge

Dagang Wang, Huilong Zhu, Wei Xu, Jihong Ye, Dekun Zhang and Magd Abdel Wahab (UGent)

(2022) ENGINEERING FAILURE ANALYSIS. 136.
Add to list
- Journal Article
- A1
Experimental crack identification of API X70 steel pipeline using improved artificial neural networks based on whale optimization algorithm

A. Ouladbrahim, I. Belaidi, Samir Khatir (UGent) , E. Magagnini, R. Capozucca and Magd Abdel Wahab (UGent)

(2022) MECHANICS OF MATERIALS. 166.
Add to list
- Journal Article
- A2
- open access
Crystal structures of three N,N,N′-trisubstituted thioureas for reactivity-controlled nanocrystal synthesis

Evert Dhaene, Isabel Van Driessche (UGent) , Klaartje De Buysser (UGent) and Kristof Van Hecke (UGent)

(2022) ACTA CRYSTALLOGRAPHICA SECTION E-CRYSTALLOGRAPHIC COMMUNICATIONS. 78(part 2). p.184-190
Add to list
- Journal Article
- A1
A hybrid PSO and Grey Wolf Optimization algorithm for static and dynamic crack identification

Faisal Al Thobiani, Samir Khatir (UGent) , Brahim Benaissa, Emad Ghandourah, Seyedali Mirjalili and Magd Abdel Wahab (UGent)

(2022) THEORETICAL AND APPLIED FRACTURE MECHANICS. 118.
Add to list
- Journal Article
- A1
- open access
Study the electrical properties of surface mount device integrated silver coated vectran yarn

Abdella Simegnaw Ahmmed, Benny Malengier (UGent) , Melkie Getnet Tadesse, Gideon Rotich and Lieva Van Langenhove (UGent)

(2022) MATERIALS. 15(1).
Add to list
- Journal Article
- A1
Crack detection in l-shaped aluminum plate via electromagnetic ultrasonic measurements

Yunlai Zhou, Youjie Cao, Ning Wang and Magd Abdel Wahab (UGent)

(2022) THEORETICAL AND APPLIED FRACTURE MECHANICS. 121.
Add to list
- Journal Article
- A1
- open access
Validation of a textile material’s electrostatic characterization device for different parameters and their effect on the electrostatic charge generation

Hasan Riaz Tahir (UGent) , Benny Malengier (UGent) , Didier Van Daele (UGent) and Lieva Van Langenhove (UGent)

(2022) MATERIALS. 15(16).
Add to list
- Journal Article
- A1
Stiffening controllable concrete modified with redispersible polymer powder for twin-pipe printing

Yaxin Tao (UGent) , Manu K Mohan (UGent) , A. V. Rahul, Yong Yuan, Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2022) CEMENT AND CONCRETE RESEARCH. 161.
Add to list
- Journal Article
- A1
Slow hole localization and fast electron cooling in Cu-doped InP/ZnSe quantum dots

P. Tim Prins, Dirk A. W. Spruijt, Mark J. J. Mangnus, Freddy T. Rabouw, Daniel Vanmaekelbergh, Celso de Mello Donega and Pieter Geiregat (UGent)

(2022) JOURNAL OF PHYSICAL CHEMISTRY LETTERS. 13. p.9950-9956
Add to list
- Journal Article
- A1
Dynamic contact behaviors of saddle materials for suspension bridge

Dagang Wang, Bo Wang, Wenli Gao, Jihong Ye and Magd Abdel Wahab (UGent)

(2022) ENGINEERING FAILURE ANALYSIS. 134.
Add to list
- Journal Article
- A1
Rheology of alkali-activated slag pastes : new insight from microstructural investigations by cryo-SEM

Yubo Sun, Shizhe Zhang, A. V. Rahul, Yaxin Tao (UGent) , Filip Van Bockstaele (UGent) , Koen Dewettinck (UGent) , Guang Ye (UGent) and Geert De Schutter (UGent)

(2022) CEMENT AND CONCRETE RESEARCH. 157.
Add to list
- Miscellaneous
- open access
RNAi-based biocontrol products : market status, regulatory aspects, and risk assessment

Kristof De Schutter (UGent) , Nji Tizi Clauvis Taning (UGent) , Lenny Van Daele (UGent) , Els Van Damme (UGent) , Peter Dubruel (UGent) and Guy Smagghe (UGent)

(2022) FRONTIERS IN INSECT SCIENCE. 1.
Add to list
- Journal Article
- A1
Intraband dynamics of mid-infrared HgTe quantum dots

Matthias Ruppert, Hanh Bui, Laxmi Kishore Sagar, Pieter Geiregat (UGent) , Zeger Hens (UGent) , Gabriel Bester and Nils Huse

(2022) NANOSCALE. 14(11). p.4123-4130
Add to list
- Journal Article
- A1
- open access
Alginate- and sulfonate-based superabsorbent polymers for application in cementitious materials : effects of kinetics on internal curing and other properties

José Roberto Tenório Filho (UGent) , Maria Adelaide Pereira Gomes de Araújo (UGent) , Els Mannekens, Nele De Belie (UGent) and Didier Snoeck (UGent)

(2022) CEMENT AND CONCRETE RESEARCH. 159.
Add to list
- Journal Article
- A1
- open access
How the layer alignment in two-dimensional nanoporous covalent organic frameworks impacts its electronic properties

Kuber Singh Rawat (UGent) , Sander Borgmans (UGent) , Tom Braeckevelt (UGent) , Christian Stevens (UGent) , Pascal Van Der Voort (UGent) and Veronique Van Speybroeck (UGent)

(2022) ACS APPLIED NANO MATERIALS. 5(10). p.14377-14387
Add to list
- Journal Article
- A1
Transport properties of 3D printed cementitious materials with prolonged time gap between successive layers

Jolien Van Der Putten (UGent) , Melissa De Volder, Philip Van den Heede (UGent) , Maxim Deprez, Veerle Cnudde (UGent) , Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2022) CEMENT AND CONCRETE RESEARCH. 155.
Add to list
- Journal Article
- A1
Raman spectroscopy of anhydrous and hydrated aluminum sulfates : experience from burning coal heaps

Filip Košek, Adam Culka, Anastasia Rousaki (UGent) , Peter Vandenabeele (UGent) and Jan Jehlička

(2022) JOURNAL OF RAMAN SPECTROSCOPY. 53(11). p.1959-1973
Add to list
- Journal Article
- A1
- open access
Colloidal continuous injection synthesis of fluorescent MoX2 (X = S, Se) nanosheets as a first step toward photonic applications

Gabriele Pippia, Anastasia Rousaki (UGent) , Matteo Barbone, Jonas Billet, Rosaria Brescia, Anatolii Polovitsyn, Beatriz Martín-García, Mirko Prato, Francesco De Boni, Marko M. Petrić, et al.

(2022) ACS APPLIED NANO MATERIALS. 5(8). p.10311-10320
Add to list
- Journal Article
- A1
- open access
On the potential of clustering approaches for hygrothermal material properties based on three degradation risks in solid masonry constructions

Bruno Vanderschelden (UGent) , Klaas Calle and Nathan Van Den Bossche (UGent)

(2022) JOURNAL OF BUILDING PHYSICS. 46(1). p.882-922
Add to list
- Conference Paper
- C1
- open access
Methodology to integrate ergonomics information in contextualized digital work instructions

Arno Claeys (UGent) , Steven Hoedt (UGent) , Corentin Domken, El-Houssaine Aghezzaf (UGent) , Dieter Claeys (UGent) and Johannes Cottyn (UGent)

(2022) PROCEDIA CIRP. 106. p.168-173
Add to list
- Journal Article
- A1
The role of cementite on the hydrogen embrittlement mechanism in martensitic medium-carbon steels

Margot Pinson, Hauke Springer, Tom Depover (UGent) and Kim Verbeken (UGent)

(2022) MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 859.
Add to list
- Journal Article
- A1
- open access
Novel design for an additively manufactured nozzle to produce tubular scaffolds via fused filament fabrication

Bahaa Shaqour (UGent) , Żaneta Górecka, Agnieszka Chmielewska, Bartłomiej Wysocki, Marcin Heljak, Maarten Gernaey, Bart Verleije, Koen Beyers, Chris Vervaet (UGent) , Emilia Choińska, et al.

(2022) ADDITIVE MANUFACTURING. 49.
Add to list
- Journal Article
- A1
- open access
Computational analysis of choices in the design of smoke extraction duct systems (SEDS) for compartment fires

Georgios Maragkos (UGent) , Karim Van Maele, Wilfried Piontkowski, Emmanuel Annerel (UGent) and Bart Merci (UGent)

(2022) FIRE TECHNOLOGY. 58(4). p.2189-2212
Add to list
- Journal Article
- A1
An efficient stochastic-based coupled model for damage identification in plate structures

Viet Long Ho, Trang Thi Trinh, Guido De Roeck, Thanh Bui-Tien, Long Nguyen-Ngoc and Magd Abdel Wahab (UGent)

(2022) ENGINEERING FAILURE ANALYSIS. 131.
Add to list
- Journal Article
- A1
- open access
Recent progress in epicardial and pericardial adipose tissue segmentation and quantification based on deep learning : a systematic review

Marin Benčević (UGent) , Irena Galić, Marija Habijan and Aleksandra Pizurica (UGent)

(2022) APPLIED SCIENCES-BASEL. 12(10).
Add to list
- Journal Article
- A1
- open access
Microscopic deformations in MDF swelling : a unique 4D-CT characterization

Pierre Kibleur (UGent) , Zaira Manigrasso (UGent) , Wannes Goethals (UGent) , Jan Aelterman (UGent) , Matthieu Boone (UGent) , Joris Van Acker (UGent) and Jan Van den Bulcke (UGent)

(2022) MATERIALS AND STRUCTURES. 55(7).
Add to list
- Journal Article
- A1
- open access
Impedance spectroscopy sensing material properties for self-tuning ratio control in pharmaceutical industry

Mihaela Ghita (UGent) , Isabela Roxana Birs (UGent) , Dana Copot (UGent) , Ioana Nascu (UGent) and Clara-Mihaela Ionescu (UGent)

(2022) APPLIED SCIENCES-BASEL. 12(1).
Add to list
- Journal Article
- A1
- open access
Setting the optimal laser power for sustainable powder bed fusion processing of elastomeric polyesters : a combined experimental and theoretical study

Ruben Vande Ryse (UGent) , Mariya Edeleva (UGent) , Ortwijn Van Stichel, Dagmar D'hooge (UGent) , Frederik Pille (UGent) , Rudinei Fiorio (UGent) , Patrick De Baets (UGent) and Ludwig Cardon (UGent)

(2022) MATERIALS. 15(1).
Add to list
- Journal Article
- A1
- open access
Unfolding the terahertz spectrum of soft porous crystals : rigid unit modes and their impact on phase transitions

Alexander Hoffman (UGent) , Irena Senkovska, Jelle Wieme, Alexander Krylov, Stefan Kaskel and Veronique Van Speybroeck (UGent)

(2022) JOURNAL OF MATERIALS CHEMISTRY A. 10(33). p.17254-17266
Add to list
- Journal Article
- A1
- open access
Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations

Anne Marie Habraken, Toros Arda Aksen, José L. Alves, Rui L. Amaral, Ehssen Betaieb, Nitin Chandola, Luca Corallo, Daniel J. Cruz, Laurent Duchêne, Bernd Engel, et al.

(2022) INTERNATIONAL JOURNAL OF MATERIAL FORMING. 15(5).
Add to list
- Journal Article
- A1
Rationally tailoring interface characteristics of ZnO/amorphous carbon/graphene for heat-conduction microwave absorbers

Maofan Zhou (UGent) , Xuefei Xu, Gengping Wan, Pengpeng Mou, Shengjie Teng and Guizhen Wang

(2022) NANO RESEARCH. 15(10). p.8677-8687
Add to list
- Journal Article
- A1
- open access
Impact of the plasma operation on the technical requirements in EU-DEMO

M. Siccinio, Wolfgang Biel (UGent) , E. Fable, T. Franke, F. Janky, P.T. Lang, M. Mattei, F. Maviglia, F. Palermo, O. Sauter, et al.

(2022) FUSION ENGINEERING AND DESIGN. 179.
Add to list
- Journal Article
- A1
Method for statistical evaluation of cumulative damage models applied to block loading

Kris Hectors (UGent) , Tanja Van Hecke (UGent) and Wim De Waele (UGent)

(2022) FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. 45(11). p.3319-3332
Add to list
- Journal Article
- A1
- open access
Linker engineering of 2D imine covalent organic frameworks for the heterogeneous palladium-catalyzed Suzuki coupling reaction

Chidharth Krishnaraj, Jena Himanshu (UGent) , Kuber Singh Rawat (UGent) , Johannes Schmidt, Karen Leus (UGent) , Veronique Van Speybroeck (UGent) and Pascal Van Der Voort (UGent)

(2022) ACS APPLIED MATERIALS & INTERFACES. 14(45). p.50923-50931
Add to list
- Journal Article
- A1
- open access
A green alternative for the direct aerobic iodination of arenes using molecular iodine and a POM@MOF catalyst

Jiamin Sun, Jena Himanshu (UGent) , Sara Abednatanzi, Ying-Ya Liu, Karen Leus (UGent) and Pascal Van Der Voort (UGent)

(2022) ACS APPLIED MATERIALS & INTERFACES. 14(33). p.37681-37688
Add to list
- Journal Article
- A1
- open access
The role of parent phase topology in double Young–Kurdjumow–Sachs variant selection during phase transformation in low-carbon steels

Leo Kestens (UGent) , Tuan Nguyen Minh (UGent) and Roumen Petrov (UGent)

(2022) METALS. 12(6).
Add to list
- Journal Article
- A1
- open access
Predicting compression pressure of knitted fabric using a modified Laplace’s law

Yetanawork Wubneh Teyeme, Benny Malengier (UGent) , Tamrat Tesfaye, Simona-Ileana Vasile, Wolelaw Endalew and Lieva Van Langenhove (UGent)

(2021) MATERIALS. 14(16).
Add to list
- Journal Article
- A1
- open access
High-rate nanofluidic energy absorption in porous zeolitic frameworks

Yueting Sun, Sven Rogge (UGent) , Aran Lamaire (UGent) , Steven Vandenbrande (UGent) , Jelle Wieme, Clive R. Siviour, Veronique Van Speybroeck (UGent) and Jin-Chong Tan

(2021) NATURE MATERIALS. 20(7). p.1015-1023
Add to list
- Journal Article
- A1
Hydrogel-induced cell membrane disruptions enable direct cytosolic delivery of membrane-impermeable cargo

Jelter Van Hoeck, Thijs Van de Vyver, Aranit Harizaj (UGent) , Glenn Goetgeluk (UGent) , Pieterjan Merckx (UGent) , Jing Liu, Mike Wels, Félix Sauvage (UGent) , Herlinde De Keersmaecker (UGent) , Christian Vanhove (UGent) , et al.

(2021) ADVANCED MATERIALS. 33(30).
Add to list
- Journal Article
- A1
Piezoelectric hybrid scaffolds mineralized with calcium carbonate for tissue engineering : analysis of local enzyme and small-molecule drug delivery, cell response and antibacterial performance

Roman Chernozem, Maria A. Surmeneva, Anatolii Abalymov, Bogdan Parakhonskiy (UGent) , Petra Rigole (UGent) , Tom Coenye (UGent) , Roman A. Surmenev and Andre Skirtach (UGent)

(2021) MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS. 122.
Add to list
- Journal Article
- A1
Cytosolic delivery of gadolinium via photoporation enables improved in vivo magnetic resonance imaging of cancer cells

Aranit Harizaj (UGent) , Benedicte Descamps (UGent) , Christophe Mangodt (UGent) , Stephan Stremersch (UGent) , Arianna Stoppa, Lieve Balcaen (UGent) , Toon Brans (UGent) , Hilde De Rooster (UGent) , Nausikaa Devriendt (UGent) , Juan Fraire (UGent) , et al.

(2021) BIOMATERIALS SCIENCE. 9(11). p.4005-4018
Add to list
- Journal Article
- A1
Bubble forming films for spatial selective cell killing

Dawei Hua, Aranit Harizaj (UGent) , Mike Wels, Toon Brans (UGent) , Stephan Stremersch (UGent) , Herlinde De Keersmaecker (UGent) , Eduardo Bolea Fernandez (UGent) , Frank Vanhaecke (UGent) , Dimitri Roels (UGent) , Kevin Braeckmans (UGent) , et al.

(2021) ADVANCED MATERIALS. 33(27).
Add to list
- Journal Article
- A1
- open access
Unravelling thermal stress due to thermal expansion mismatch in metal–organic frameworks for methane storage

Jelle Wieme and Veronique Van Speybroeck (UGent)

(2021) JOURNAL OF MATERIALS CHEMISTRY A. 9(8). p.4898-4906
Add to list
- Miscellaneous
Computational prediction of the molecular configuration of three-dimensional network polymers

Lies De Keer, Karsu I. Kilic, Paul Van Steenberge (UGent) , Lode Daelemans (UGent) , Daniel Kodura, Hendrik Frisch, Karen De Clerck (UGent) , Marie-Françoise Reyniers (UGent) , Christopher Barner-Kowollik, Reinhold H. Dauskardt, et al.

(2021) NATURE MATERIALS. 20(10).
Add to list
- Journal Article
- A1
- open access
Review of convective heat transfer modelling in CFD simulations of fire-driven flows

Georgios Maragkos (UGent) and Tarek Beji (UGent)

(2021) APPLIED SCIENCES-BASEL. 11(11).
Add to list
- Journal Article
- A1
Grand canonical Monte Carlo simulations to determine the optimal interlayer distance of a graphene slit-shaped pore for adsorption of methane, hydrogen and their equimolar mixture

Jelle Vekeman (UGent) , Daniel Bahamon, Inmaculada García Cuesta, Noelia Faginas-Lago, José Sánchez-Marín, Alfredo Sánchez de Merás and Lourdes F. Vega

(2021) NANOMATERIALS. 11(10).
Add to list
- Journal Article
- A1
Switching on near-infrared light in lanthanide-doped CsPbCl3 perovskite nanocrystals

Min Zeng, Federico Locardi (UGent) , Dimitrije Mara, Zeger Hens (UGent) , Rik Van Deun (UGent) and Flavia Artizzu (UGent)

(2021) NANOSCALE. 13(17). p.8118-8125
Add to list
- Journal Article
- A1
Adequate fire safety for structural steel elements based upon life-time cost optimization

Danny Hopkin, Ian Fu and Ruben Van Coile (UGent)

(2021) FIRE SAFETY JOURNAL. 120.
Add to list
- Journal Article
- A1
- open access
Individual particle heating of interacting magnetic nanoparticles at nonzero temperature

Jonathan Leliaert (UGent) , Javier Ortega-Julia and Daniel Ortega

(2021) NANOSCALE. 13(35). p.14734-14744
Add to list
- Journal Article
- A1
- open access
Noise power properties of magnetic nanoparticles as measured in thermal noise magnetometry

Katrijn Everaert, Maik Liebl, Dirk Gutkelch, James Wells, Bartel Van Waeyenberge (UGent) , Frank Wiekhorst and Jonathan Leliaert (UGent)

(2021) IEEE ACCESS. 9. p.111505-111517
Add to list
- Journal Article
- A1
Data rich imaging approaches assessing fatigue crack initiation and early propagation in a DS superalloy at room temperature

Y. G. Tan, D. J. Bull, R. Jiang, A. Evangelou, Somsubhro Chaudhuri (UGent) , S. Octaviani, F. Pierron, N. Gao, H. Toda, I. Sinclair, et al.

(2021) MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 805.
Add to list
- Journal Article
- A1
Synthesis of colloidal WSe2 nanocrystals : polymorphism control by precursor-ligand chemistry

Pengshang Zhou, Pieter Schiettecatte (UGent) , Matthias Vandichel, Anastasia Rousaki (UGent) , Peter Vandenabeele (UGent) , Zeger Hens (UGent) and Shalini Singh (UGent)

(2021) CRYSTAL GROWTH & DESIGN. 21(3). p.1451-1460
Add to list
- Journal Article
- A1
Micro‐Raman spectroscopy to investigate production techniques : a focus on fine ware potteries

Eleonora Odelli, Simona Raneri, Federico Cantini, Sara Mattiello, Emma Salvioli‐Mariani, Pier Paolo Lottici and Danilo Bersani

(2021) JOURNAL OF RAMAN SPECTROSCOPY. 52(1). p.199-207
Add to list
- Journal Article
- A1
Sensitivity analysis of the hygrothermal behaviour of homogeneous masonry constructions : interior insulation, rainwater infiltration and hydrophobic treatment

Klaas Calle and Nathan Van Den Bossche (UGent)

(2021) JOURNAL OF BUILDING PHYSICS. 44(6). p.510-538
Add to list
- Journal Article
- A1
- open access
Stimulated emission through an electron–hole plasma in colloidal CdSe quantum rings

Carmelita Rodà, Bastiaan B. V. Salzmann, Isabella Wagner, Yera Ussembayev (UGent) , Kai Chen, Justin M. Hodgkiss, Kristiaan Neyts (UGent) , Iwan Moreels (UGent) , Daniel Vanmaekelbergh and Pieter Geiregat (UGent)

(2021) NANO LETTERS. 21(23). p.10062-10069
Add to list
- Journal Article
- A1
- open access
Elucidation of the pre-nucleation phase directing metal-organic framework formation

Matthias Filez (UGent) , Chiara Caratelli, Miguel Rivera-Torrente, Francesco Muniz Miranda (UGent) , Max Hoek, Maarten Altelaar, Albert J. R. Heck, Veronique Van Speybroeck (UGent) and Bert M. Weckhuysen

(2021) CELL REPORTS PHYSICAL SCIENCE. 2(12).
Add to list
- Journal Article
- A1
- open access
Training on polar image transformations improves biomedical image segmentation

Marin Benčević (UGent) , Irena Galic, Marija Habijan and Danilo Babin (UGent)

(2021) IEEE ACCESS. 9. p.133365-133375
Add to list
- Journal Article
- A1
- open access
Modeling of geometric configuration and fiber interactions in short fiber reinforced composites via new modified Eshelby tensors and enhanced mean-field homogenization

Ehsan Rashidinejad (UGent) , Hossein Ahmadi (UGent) , Mohammad Hajikazemi (UGent) and Wim Van Paepegem (UGent)

(2021) MECHANICS OF MATERIALS. 162.

Defect modes generated in a stack of spin-coated chiral liquid crystal layers

Playing with low amounts of expanded graphite for melt-processed polyamide and copolyester nanocomposites to achieve control of mechanical, tribological, thermal and dielectric properties

Controlling Pt nanoparticle sintering by sub-monolayer MgO ALD thin films

Transient analysis of a cracked functionally graded magneto‐electro‐elastic rectangular finite plane under anti‐plane mechanical and in‐plane electric and magnetic impacts

Weighted sumrate maximizing hybrid precoder for MU-MISO-OFDM

On the potential correlation between dynamic strain aging and liquid metal embrittlement in T91/LBE system

Analysis of road infrastructure and traffic factors influencing crash frequency : insights from generalised poisson models

Non-destructive evaluation of ductile-porous versus brittle 3D printed vascular networks in self-healing concrete

Tunable self-referenced molecular thermometers via manipulation of dual emission in platinum(II) pyridinedipyrrolide complexes

Aggregate type and concrete age effects on anchor breakout performance : large database and insights

A nonlinear optimization method for calibration of large‐scale deep cement mixing in very soft clay deep excavation

The effects of strain rate and anisotropy on the formability and mechanical behaviour of aluminium alloy 2024-T3

Scalable job recommendation with lower congestion using optimal transport

Durability of CFRP strengthened RC beam after six years exposure to natural hygrothermal environment with sustained loads

Nanoscale chemical diversity of coke deposits on nanoprinted metal catalysts visualized by tip‐enhanced Raman spectroscopy

Nanomaterials in electrochemical nanobiosensors of miRNAs

Evolutions of microstructure and crystallographic texture in an Fe-1.2 wt.% Si alloy after (a)symmetric warm rolling and annealing

Optimizing the shield tunnel backfilling grouts with supplementary cementitious materials by response surface methodology

Artificial neural network and YUKI algorithm for notch depth prediction in X70 steel specimens

Texture formation under control of S phase characteristic and tensile property of hot-rolling 2A12 aluminum alloy improved by brass texture

Weldability of additively manufactured powder bed fusion 316L stainless steel using arc and laser welding

Size-controlled oxide perovskite nanocrystal synthesis : design, optimization, and mechanism insights

Fatigue crack propagation of AA2024 alloy under texture control using crystal plasticity coupled with accelerated cyclic cohesive zone model

Lipid nanoparticle encapsulation empowers poly(I:C) to activate cytoplasmic RLRs and thereby increases its adjuvanticity

Experimental investigation and constitutive material modelling of low cycle fatigue of EUROFER97 for fusion applications

Modal parameter identification in civil structures via Hilbert transform ensemble with improved empirical wavelet transform

An experimental investigation on the relation between corrosion and thermohydraulic behavior in heat exchangers for geothermal applications

Shoulder pain in persons with tetraplegia and the association with force application during manual wheelchair propulsion

Natural language processing in knowledge-based support for operator assistance

Condition assessment of a concrete filled steel tube arch bridge using in-situ vibration measurements and an Improved Artificial Fish Swarm Algorithm

An overview of estimations for the high-cycle fatigue strength of conventionally manufactured steels based on other mechanical properties

Explainable deep learning to classify royal navy ships

From corrosion casting to virtual dissection : contrast‐enhanced vascular imaging using hafnium oxide nanocrystals

Neutron radiography with simultaneous deformation measurements demand rethinking the modelling of imbibition in cement paste

Study of the effect of defects on fatigue life prediction of additive manufactured Ti-6Al-4V by combined use of micro-computed tomography and fracture-mechanics-based simulation

Comparative analysis of elastic polyester sportswear fabrics with printed graphene patterns

Understanding and hindering ion migration in Er,Yb:LiLuF4 core-shell nanoparticles for nanothermometers with enhanced photoluminescence

Fretting fatigue lifetime estimation for heterogeneous material using critical distance with mesh control

Multi-parameter identification of concrete dam using polynomial chaos expansion and slime mould algorithm

Two-Scale analysis of fretting fatigue crack initiation in heterogeneous materials using Continuum Damage Mechanics

Spark discharge doping : achieving unprecedented control over aggregate fraction and backbone ordering in poly(3‐hexylthiophene) solutions

Microscopic linker distribution in mixed-linker zeolitic imidazolate frameworks via computational raman spectroscopy : implications for gas separation

Functional optimization for a Beam Driven Plasma Neutralizer in DEMO Neutral Beam Injector

Digital image correlation for measuring full-field residual stresses in wire and arc additive manufactured components

Effect of growth temperature and atmosphere exposure time on impurity incorporation in sputtered Mg, Al, and Ca thin films

The native liver as inspiration to create superior in vitro hepatic models

Interplay between membrane imperfections and external concentration polarization

Volumetric printing of thiol‐ene photo‐cross‐linkable poly(ε‐caprolactone) : a tunable material platform serving biomedical applications

The mechanism behind the effect of building orientation and surface roughness on hydrogen embrittlement of laser powder bed fused Ti-6Al-4V

Purifying single photon emission from giant shell CdSe/CdS quantum dots at room temperature

The mechanism of hydride formation during electrochemical hydrogen charging of Ti-6Al-4V

Modeling of hydrogen-charged notched tensile tests of an X70 pipeline steel with a hydrogen-informed Gurson model

Metal nanocatalyst sintering interrogated at complementary length scales

Laser‐scanning microscopy for electrophoretic mobility characterization of single nanoparticles

Role of anisotropy on strain localization at high-strain rates in Ti6Al4V

Plasmonic nanodomains decorated on two-dimensional oxide semiconductors for photonic-assisted CO2 conversion

Metal nanocatalyst sintering interrogated at complementary length scales (Small 5/2023)

Acoustic-activated Se crystalline nanodomains at atomically-thin liquid-metal piezoelectric heterointerfaces for synergistic CO2 conversion

Evaluation of microstructural and environmental effects on the hydrogen uptake and desorption in high-strength carbon steels : a thermal desorption spectroscopy study

Chiral photonic micromotors : uni‐ and bidirectional rotation and speed control in chiral photonic micromotors powered by light (Small 20/2023)

Mortar cure-dependent effects on adhesive anchor systems loaded in tension

Role of cementite morphology on corrosion layer formation of high-strength carbon steels in sweet and sour environments

Turning impossible water sliding on water-loving surfaces possible

Development of HVDC gas-insulated components for the power supply of neutral beam injectors

Gradual deterioration behavior of the load-bearing strength of main cable wires in a suspension bridge

Materials for a changing planet

Process optimization and characterization of dense pure copper parts produced by paste-based 3D micro-extrusion

Aza-benzannulated-perylenebisimide-porphyrin dyad as an intensely absorbing donor in bulk-heterojunction organic solar cells

Crystalline nanodomains at multifunctional two-dimensional liquid-metal hybrid interfaces

In-situ hydrogen embrittlement evaluation of as-built and heat treated laser powder bed fused Ti-6Al-4V versus conventionally cold rolled Ti-6Al-4V

Controlled BZO nanorod growth and improved flux pinning in YBCO films grown on vicinal STO substrates

A new methodology to predict the sequence of GFRP layers using machine learning and JAYA algorithm

Numerical device modeling for direct Z-scheme junctions using a solar cell simulator

In silico quantification of 3D thermal gradients and voids during fused filament fabrication deposition to enhance mechanical and dimensional stability

Estimation of fretting fatigue lifetime in heterogeneous material based on microstructure characterization and multi-scale homogenization

3D printed concrete as stay‐in‐place formwork : mechanics during casting and curing

Estimating the heating of complex nanoparticle aggregates for magnetic hyperthermia

Machine learning potentials for metal-organic frameworks using an incremental learning approach

Relation between ASTM E606 specimen geometry and misalignment in strain-controlled fatigue testing

Absorbing stress via molecular crumple zones : strain engineering flexibility into the rigid UiO-66 material