Show
Sort by
-
Transient analysis of a cracked functionally graded magneto‐electro‐elastic rectangular finite plane under anti‐plane mechanical and in‐plane electric and magnetic impacts
-
Thermal relaxation of compressive residual stresses in surface gradient nanostructure of TC11 titanium alloy
-
- Journal Article
- A1
- open access
Modal parameter identification in civil structures via Hilbert transform ensemble with improved empirical wavelet transform
-
Experimental and numerical analysis of strength and deformation of large‐scale steel‐composite adhesive joints subjected to fatigue followed by static loading
-
Effect of shot peening parameters on fretting fatigue lifetime
-
Fatigue crack propagation of AA2024 alloy under texture control using crystal plasticity coupled with accelerated cyclic cohesive zone model
-
Characterisation of hydride formation in as-built and heat treated laser powder bed fused Ti-6Al-4V
-
A nonlinear optimization method for calibration of large‐scale deep cement mixing in very soft clay deep excavation
-
Effect of laser shock peening on fretting wear behaviour of AISI 304 stainless alloy
-
Study of the effect of defects on fatigue life prediction of additive manufactured Ti-6Al-4V by combined use of micro-computed tomography and fracture-mechanics-based simulation
-
Multiscale evaluation of hydrogen-assisted mechanical degradation in grade 2 titanium
-
A numerical multi-scale method for analyzing the rate-dependent and inelastic response of short fiber reinforced polymers : modeling framework and experimental validation
-
Durability of CFRP strengthened RC beam after six years exposure to natural hygrothermal environment with sustained loads
-
Uncertainty quantification of the wall thickness and stiffness in an idealized dissected aorta
-
The effect of hydrogen and notch orientation in SENT specimens on the fracture toughness of an API 5L X70 pipeline steel
-
Fretting fatigue crack nucleation analysis under a variable coefficient of friction
-
- Journal Article
- A1
- open access
Volumetric printing of thiol‐ene photo‐cross‐linkable poly(ε‐caprolactone) : a tunable material platform serving biomedical applications
-
Prediction of the effect of shot peening residual stress on fretting fatigue behaviour
-
- Journal Article
- A1
- open access
Identification of gear wear damage using topography analysis
-
- Journal Article
- A1
- open access
Closed-form analytical solutions for predicting stress transfers and thermo-elastic properties of short fiber composites
-
Tribological assessment of rice husk ash in eco-friendly brake friction materials
-
- Journal Article
- A1
- open access
Calcareous silt earthen construction using biopolymer reinforcement
-
- Journal Article
- A1
- open access
Role of anisotropy on strain localization at high-strain rates in Ti6Al4V
-
- Journal Article
- A1
- open access
A deep learning approach to predict fretting fatigue crack initiation location
-
- Journal Article
- A1
- open access
Coupling an SPH-based solver with an FEA structural solver to simulate free surface flows interacting with flexible structures
-
- Journal Article
- A1
- open access
An improved Artificial Neural Network for the direct prediction of fretting fatigue crack initiation lifetime
-
- Journal Article
- A1
- open access
Two-Scale analysis of fretting fatigue crack initiation in heterogeneous materials using Continuum Damage Mechanics
-
- Journal Article
- A1
- open access
Experimental deformation analysis of an adhesively bonded multi‐material joint for marine applications
-
- Journal Article
- A1
- open access
Fatigue behaviour of thermoplastic glass/polypropylene composite cross-ply laminates : an experimental study with in-situ damage observations and numerical validation
-
- Journal Article
- A1
- open access
Competitive effect of residual stress and surface roughness on the fatigue life of shot peened S42200 steel at room and elevated temperature
-
- Journal Article
- A1
- open access
Low temperature area selective atomic layer deposition of ruthenium dioxide thin films using polymers as inhibition layers
-
- Journal Article
- A1
- open access
Degradation and failure analysis of bolted joints under transverse loading
-
- Journal Article
- A1
- open access
A review of the efficiency of self-healing concrete technologies for durable and sustainable concrete under realistic conditions
-
- Journal Article
- A1
- open access
Towards material and process agnostic features for the classification of pore types in metal additive manufacturing
-
- Journal Article
- A1
- open access
Uncovering the white etching area and crack formation mechanism in bearing steel
-
- Journal Article
- A1
- open access
Numerical modelling of rolling contact fatigue damage initiation from non-metallic inclusions in bearing steel
-
- Journal Article
- A1
- open access
Fretting fatigue lifetime estimation for heterogeneous material using critical distance with mesh control
-
Materials for a changing planet
-
- Journal Article
- A2
- open access
Influence of the process parameters on the properties of Cu-Cu ultrasonic welds
-
- Journal Article
- A1
- open access
Fretting fatigue crack propagation under out-of-phase loading conditions using extended maximum tangential stress criterion
-
Effect of stress triaxiality on the hydrogen embrittlement micromechanisms in a pipeline steel evaluated by fractographic analysis
-
Relation between ASTM E606 specimen geometry and misalignment in strain-controlled fatigue testing
-
- Journal Article
- A1
- open access
Machine learning potentials for metal-organic frameworks using an incremental learning approach
-
A novel high-speed bulge test to identify the large deformation behavior of sheet metals
-
- Journal Article
- A1
- open access
A new methodology to predict the sequence of GFRP layers using machine learning and JAYA algorithm
-
Boundary layer influence on ship model tests in extremely shallow and confined water
-
3D printed concrete as stay‐in‐place formwork : mechanics during casting and curing
-
Viscosity experiments of slag-spinel suspensions : the effect of volume fraction, particle size, and shear rate
-
Tailored nonlinear stiffness and geometric damping : applied to a bistable vibration absorber
-
Two-step approach based on fused filament fabrication for high performance graphene/thermoplastic polyurethane composite with segregated structure
-
- Journal Article
- A1
- open access
Recommendation of RILEM TC 271-ASC : new accelerated test procedure for the assessment of resistance of natural stone and fired-clay brick units against salt crystallization
-
- Journal Article
- A1
- open access
Interfacing biology and electronics with memristive materials
-
- Journal Article
- A1
- open access
Influence of abrasive characteristics on the wear micro-mechanisms of NbC and WC cermets during three-body abrasion
-
Experimental and numerical fatigue damage characterization in multidirectional thermoplastic glass/polypropylene laminates based on in-situ damage observations
-
- Journal Article
- A1
- open access
Hapten/myristoyl functionalized poly(propyleneimine) dendrimers as potent cell surface recruiters of antibodies for mediating innate immune killing
-
- Journal Article
- A1
- open access
Rethinking databases : the fib project for a connected data repository
-
- Journal Article
- A1
- open access
A deep neural network approach combined with Findley parameter to predict fretting fatigue crack initiation lifetime
-
Quantifying hydrolytic degradation of poly(ethylene terephthalate glycol) under storage conditions and for fused filament fabrication mechanical properties
-
Measurement of three-dimensional concentric and angular misalignment in static and fatigue testing of materials by stereo-digital image correlation
-
Nanoscale Chemical Diversity of Coke Deposits on Nanoprinted Metal Catalysts Visualized by Tip‐Enhanced Raman Spectroscopy
-
Hygrothermal aging of particle-filled epoxy-based composites
-
- Journal Article
- A1
- open access
Transition in wear regime during braking applications : an analysis of the debris and surfaces of the brake pad and disc
-
The effect of an Al-induced ferritic microfilm on the hydrogen embrittlement mechanism in martensitic steels
-
On the role of the stacking fault energy in the beneficial effect of aluminium on the hydrogen embrittlement sensitivity of twinning-induced plasticity (TWIP) steel
-
- Journal Article
- A1
- open access
Ray tracing-based PIV of turbulent flows in roughened circular channels
-
- Journal Article
- A1
- open access
Fundamental and formation aspects of slag freeze linings : a review
-
The addition of aluminum to brittle martensitic steels in order to increase ductility by forming a grain boundary ferritic microfilm
-
Numerical analysis of crack propagation in fretting fatigue specimen repaired by stop hole method
-
The effect of Nb on the hydrogen embrittlement susceptibility of Q&P steel under static and dynamic loading
-
Interaction between surface breaking and embedded circumferential flaws in tension loaded (pressurized) steel pipes
-
Investigation on fretting fatigue crack initiation in heterogenous materials using a hybrid of multiscale homogenization and direct numerical simulation
-
- Journal Article
- A1
- open access
Thermomechanical behavior of brake drums under extreme braking conditions
-
Fretting fatigue crack initiation behaviour in heterogeneous materials under out-of-phase loading
-
Fatigue crack propagation across grain boundary of Al-Cu-Mg bicrystal based on crystal plasticity XFEM and cohesive zone model
-
Forces and torque acting on a rudder while manoeuvring
-
- Journal Article
- A1
- open access
Polygonal finite element for two-dimensional lid-driven cavity flow
-
- Journal Article
- A2
- open access
Development and evaluation of the ultrasonic welding process for copper-aluminium dissimilar welding
-
Experimental crack identification of API X70 steel pipeline using improved artificial neural networks based on whale optimization algorithm
-
- Journal Article
- A1
- open access
Analysis of adaptive mesh refinement in a turbulent buoyant helium plume
-
Effect of residual stress induced by ultrasonic surface rolling on fretting fatigue behaviors of Ti-6Al-4V alloy
-
- Journal Article
- A2
- open access
Combination of intermittent search strategy and an Improve Particle Swarm Optimization algorithm (IPSO) for model updating
-
- Journal Article
- A2
- open access
Crack prediction in beam-like structure using ANN based on frequency analysis
-
- Journal Article
- A2
- open access
Residual force method for damage identification in a laminated composite plate with different boundary conditions
-
- Journal Article
- A1
- open access
Durability of self-healing cementitious systems with encapsulated polyurethane evaluated with a new pre-standard test method
-
- Journal Article
- A1
- open access
A variational approach for accurate prediction of stress and displacement fields and thermo-elastic constants in general symmetric laminates containing ply cracking and delamination under general triaxial loading
-
- Journal Article
- A1
- open access
Effect of solid volume fraction on the magnetorheological response of nano-Fe3O4 incorporated cementitious paste
-
- Journal Article
- A1
- open access
How reproducible are surface areas calculated from the BET equation?
-
A heuristic algorithm for optimal load splitting in hybrid thermally activated building systems
-
ERGO : a new robust design optimization technique combining multi-objective Bayesian optimization with analytical uncertainty quantification
-
- Journal Article
- A1
- open access
Autonomous ships for container shipping in the Arctic routes
-
The role of cementite on the hydrogen embrittlement mechanism in martensitic medium-carbon steels
-
- Journal Article
- A1
- open access
Monitoring onsite‐temperature prediction error for condition monitoring of civil infrastructures
-
- Journal Article
- A1
- open access
Microscopic deformations in MDF swelling : a unique 4D-CT characterization
-
- Journal Article
- A1
- open access
Modelling and predictions of time-dependent local stress distributions around cracks under dwell loading in a nickel-based superalloy at high temperatures
-
Method for statistical evaluation of cumulative damage models applied to block loading
-
Artificial neural network combined with damage parameters to predict fretting fatigue crack initiation lifetime
-
Influence of internal volumetric imperfections on the tearing resistance curve of welded single edge notched tension (SENT) specimens
-
Investigation of the effect of carbon on the reversible hydrogen trapping behavior in lab-cast martensitic Fe-C steels
-
Tribological performance of eco-friendly friction materials with rice husk
-
Hydraulic-based testing and material modelling to investigate uniaxial compression of thermoset and thermoplastic polymers in quasistatic-to-dynamic regime
-
- Journal Article
- A1
- open access
Near-infrared rechargeable glass-based composites for green persistent luminescence
-
Plasma-assisted growth of two-dimensional Ga2O3/Gas heterophases on liquid alloy substrate for nanoelectronic applications
-
- Journal Article
- A1
- open access
Fatigue damage and life evaluation of thick bi‐material double strap joints for use in marine applications
-
- Journal Article
- A1
- open access
Phase inversion in (vibro‐)thermal wave imaging of materials : extracting the AC component and filtering nonlinearity
-
Non-viral siRNA delivery to T cells : challenges and opportunities in cancer immunotherapy
-
Effect of cenospheres on the engineering properties of lightweight cementitious composites : a comprehensive review
-
Single-point scratch testing for understanding particle engagement in abrasion of multiphase materials
-
Mechanistic interpretation on acidic stress-corrosion cracking of NiCrMoV steam turbine steel
-
The effect of Nb on the strain rate and temperature dependent behaviour of quenching & partitioning steels
-
Influence of displacement rate and temperature on the severity of liquid metal embrittlement of T91 steel in LBE
-
Influence of the nitrogen content on the structure and properties of MoNbTaVW high entropy alloy thin films
-
High-voltage synthetic inductor for vibration damping in resonant piezoelectric shunt
-
Modeling detrimental effects of high surface roughness on the fatigue behavior of additively manufactured Ti-6Al-4V alloys
-
- Journal Article
- A1
- open access
Experimental methodology to assess the dynamic equivalent stiffness properties of elliptical orthotropic plates
-
An improved unified viscoplastic model for modelling low cycle fatigue and creep fatigue interaction loadings of 9-12%Cr steel
-
Study on the biological behaviors of Ca-P coatings with different morphology on carbon/carbon composites
-
- Journal Article
- A1
- open access
Development of a novel viscosity modifier agent for cementitious materials : preliminary study
-
Tribological investigation of abrasion resistant steels with martensitic and retained austenitic microstructure in single- and multi–asperity contact
-
Pressure-velocity limit evaluation on POM-C + carbon black at different temperatures
-
A concrete damage plasticity model for predicting the effects of compressive high-strength concrete under static and dynamic loads
-
- Journal Article
- A2
- open access
Sensitivity analysis of the GTN damage parameters at different temperature for dynamic fracture propagation in X70 pipeline steel using neural network
-
Effect of alkali treatment on the mechanical property of natural fiber in a concrete : a mini review
-
- Journal Article
- A1
- open access
Super-ions of sodium cations with hydrated hydroxide anions : inorganic structure-directing agents in zeolite synthesis
-
Truth and myth of phase coexistence in methylammonium lead iodide perovskite thin film via transmission electron microscopy
-
- Journal Article
- A1
- open access
An efficient quasi‐Newton method for three‐dimensional steady free surface flow
-
A Galerkin/hyper-reduction technique to reduce steady-state elastohydrodynamic line contact problems
-
- Journal Article
- A1
- open access
Apparent wall slip effects on rheometric measurements of waxy gels
-
- Journal Article
- A1
- open access
Texture formation in polycrystalline thin films of all‐inorganic lead halide perovskite
-
- Journal Article
- A1
- open access
The effect of surface pit treatment on fretting fatigue crack initiation
-
- Journal Article
- A1
- open access
Three-dimensional meshfree analysis of interlocking concrete blocks for step seawall structure
-
Influence of weld geometry on stress concentration factor distributions in tubular joints
-
Development of photo-crosslinkable collagen hydrogel building blocks for vascular tissue engineering applications : a superior alternative to methacrylated gelatin?
-
Lifting the quality of fused filament fabrication of polylactic acid based composites
-
- Journal Article
- A1
- open access
Innovative SuperAbsorbent Polymers (iSAPs) to construct crack-free reinforced concrete walls : an in-field large-scale testing campaign
-
Molecular dynamics simulations of effective interactions among clinker minerals in aqueous solution and the structure and dynamics of the interstitial water
-
Assessment of the hydrogen interaction on the mechanical integrity of a welded martensitic steel
-
- Journal Article
- A1
- open access
Application of super absorbent polymers (SAP) in concrete construction : update of RILEM state-of-the-art report
-
- Journal Article
- A1
- open access
Fatigue crack propagation within Al-Cu-Mg single crystals based on crystal plasticity and XFEM combined with cohesive zone model
-
Stress concentration factors of multi-planar tubular KT-joints subjected to in-plane bending moments
-
- Journal Article
- A1
- open access
Reduced order models for the incompressible Navier‐Stokes equations on collocated grids using a ‘discretize‐then‐project’ approach
-
Enhancing thixotropy and structural build-up of alkali-activated slag/fly ash pastes with nano clay
-
- Journal Article
- A2
- open access
Damage identification in steel plate using FRF and inverse analysis
-
- Journal Article
- A1
- open access
Grain-orientation induced stress formation in AA2024 monocrystal and bicrystal using Crystal Plasticity Finite Element Method
-
Influence of Mo–Nb–Ti additions and peak annealing temperature on the microstructure and mechanical properties of low alloy steels after ultrafast heating process
-
On the experimental estimation of CTOD fracture parameter using SE(T) specimens based upon only one clip gauge measurement
-
Hydrogel-induced cell membrane disruptions enable direct cytosolic delivery of membrane-impermeable cargo
-
Piezoelectric hybrid scaffolds mineralized with calcium carbonate for tissue engineering : analysis of local enzyme and small-molecule drug delivery, cell response and antibacterial performance
-
Bubble forming films for spatial selective cell killing
-
- Journal Article
- A1
- open access
High-rate nanofluidic energy absorption in porous zeolitic frameworks
-
Stress intensity factor evaluation for central oriented cracks by stress dead‐zone concept
-
- Journal Article
- A1
- open access
Determination of the Fe3+/ΣFe ratio in synthetic lead silicate slags using X-band CW-EPR
-
- Journal Article
- A1
- open access
Towards more reliable PbO-SiO2 based slag viscosity measurements in alumina via a dense intermediate spinel layer
-
Data rich imaging approaches assessing fatigue crack initiation and early propagation in a DS superalloy at room temperature
-
- Journal Article
- A1
- open access
Modeling of geometric configuration and fiber interactions in short fiber reinforced composites via new modified Eshelby tensors and enhanced mean-field homogenization
-
Computational prediction of the molecular configuration of three-dimensional network polymers
-
Biomaterials applications of cyclic polymers
-
Early age autogenous shrinkage cracking risk of an ultra-high performance concrete (UHPC) wall : modelling and experimental results
-
- Journal Article
- A1
- open access
Computational prediction of the molecular configuration of three-dimensional network polymers
-
Experimental investigation into the energy absorption of composite-metal tubes subjected to lateral load
(2020) IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING. 44(3). p.585-598 -
Mechanical and morphometric study of mitral valve chordae tendineae and related papillary muscle
-
Qualification of the in-situ bending technique towards the evaluation of the hydrogen induced fracture mechanism of martensitic Fe–C steels
-
Matrix cracking initiation, propagation and laminate failure in multiple plies of general symmetric composite laminates
-
Aspects of fretting fatigue finite element modelling
-
A data-driven approach based on long short-term memory and hidden Markov model for crack propagation prediction
-
Non-conforming multipatches for NURBS-based finite element analysis of higher-order phase-field models for brittle fracture
-
- Journal Article
- A1
- open access
Chitosan/γ-PGA nanoparticles-based immunotherapy as adjuvant to radiotherapy in breast cancer
-
- Journal Article
- A1
- open access
Tribological performance of non-halogenated phosphonium ionic liquids as additives to polypropylene and lithium-complex greases
-
- Journal Article
- A2
- open access
The hydrogen embrittlement sensitivity of duplex stainless steel with different phase fractions evaluated by in-situ mechanical testing
-
The effect of a constant tensile load on the hydrogen diffusivity in dual phase steel by electrochemical permeation experiments
-
Splitting susceptibility in modern X80 pipeline steels
-
EBSD characterization of hydrogen induced blisters and internal cracks in TRIP-assisted steel
-
The effect of hydrogen on the crack initiation site of TRIP-assisted steels during in-situ hydrogen plasma micro-tensile testing : leading to an improved ductility?
-
Thermal desorption spectroscopy evaluation of hydrogen-induced damage and deformation-induced defects
-
Proper orthogonal decomposition for the prediction of fretting wear characteristics
-
Enhanced brass texture of hot-rolled Al-4Cu-1.6Mg alloy by 0.1% Zr addition
-
- Journal Article
- A1
- open access
Evaluating the exit pressure method for measurements of normal stress difference at high shear rates
-
Selective laser melted stainless steel CX : role of built orientation on microstructure and micro-mechanical properties
-
- Journal Article
- A1
- open access
Two-dimensional superstructures of silica cages
-
- Journal Article
- A1
- open access
Insight into the effects of confined hydrocarbon species on the lifetime of methanol conversion catalysts
-
Combining carbon nanotube foam with nanosilver/silicone resin or graphene foam for advanced metamaterial design
-
Evaluation of the active mechanism for acidic SCC induced mechanical degradation : a methodological approach
-
- Journal Article
- A2
- open access
Unified methodology for characterisation of global fatigue damage evolution in adhesively bonded joints
-
Hydrogen-assisted cracking in 2205 duplex stainless steel : initiation, propagation and interaction with deformation-induced martensite
-
- Journal Article
- A1
- open access
Targeted nanoparticles towards increased L cell stimulation as a strategy to improve oral peptide delivery in incretin-based diabetes treatment
-
Relationship between the processing, structure, and properties of microfibrillar composites
-
- Journal Article
- A1
- open access
Nanofibre toughening of dissimilar interfaces in composites
-
Abrasive wear behaviour of 27MnB5 steel used in agricultural tines
-
Fretting fatigue lifetime estimation using a cyclic cohesive zone model
-
The effect of a critical micro-void defect on fretting fatigue crack initiation in heterogeneous material using a multiscale approach
-
Microstructure-sensitive modeling of competing failure mode between surface and internal nucleation in high cycle fatigue
-
A novel mathematical method to analyze the free vibration of eccentric annular plates
-
Micro-CT based finite element modelling and experimental characterization of the compressive mechanical properties of 3-D zirconia scaffolds for bone tissue engineering
-
- Journal Article
- A1
- open access
An efficient quasi‐Newton method for two‐dimensional steady free surface flow
-
An efficient approach to model updating for a multispan railway bridge using orthogonal diagonalization combined with improved particle swarm optimization
-
Behavior of ultrafast annealed advanced high strength steels under static and dynamic conditions
-
Large-scale tribological characterisation of eco-friendly basalt and jute fibre reinforced thermoset composites
-
Preparation of porous poly (lactic acid) fibers by medium field electrospinning for tissue engineering applications
-
- Journal Article
- A2
- open access
Initiation of hydrogen induced cracks at secondary phase particles
-
- Journal Article
- A1
- open access
Bioactivity of catalase loaded into vaterite CaCO3 crystals via adsorption and co-synthesis
-
Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing
-
Optimization and validation of a load-controlled numerical model for single asperity scratch
-
Design, construction and experimental performance of a nonlinear energy sink in mitigating multi-modal vibrations
-
Microstructural based hydrogen diffusion and trapping models applied to Fe-C-X alloys
-
- Journal Article
- A1
- open access
Multiscale analysis of the effect of debris on fretting wear process using a semi-concurrent method
-
- Journal Article
- A1
- open access
Multi-scale analysis of fretting fatigue in heterogeneous materials using computational homogenization
-
- Journal Article
- A1
- open access
Review on the prediction of residual stress in welded steel components
-
Synergism in multi-asperity abrasion-corrosion of martensitic and dual phase steels in three aqueous electrolytes
-
- Journal Article
- A1
- open access
Nanofibers with a tunable wettability by electrospinning and physical crosslinking of poly(2-n-propyl-2-oxazoline)
-
A parallel hybrid implementation of the 2D acoustic wave equation
-
Tribological characteristics of cast polyamide 6 (PA6G) matrix and their composite (PA6G SL) under normal and overload conditions using dynamic pin-on-plate system
-
The effect of soaking time after ultrafast heating on the microstructure and mechanical behavior of a low carbon steel
-
FE8 type laboratory testing of white etching crack (WEC) bearing failure mode in 100Cr6
-
The effect of heating rate and soaking time on microstructure of an advanced high strength steel
-
In-situ observation of strain partitioning and damage development in continuously cooled carbide-free bainitic steels using micro digital image correlation
-
Experimental and numerical investigation on 3D printed PLA sacrificial honeycomb cladding
-
Effect of pressure in the transition between moderate and severe wear regimes in brake friction materials
-
Influence of copper on automotive brake performance
-
- Journal Article
- A1
- open access
A first-principles reassessment of the Fe-N phase diagram in the low-nitrogen limit
-
One-shot production of large-scale 3D woven fabrics with integrated prismatic shaped cavities and their applications
-
Novel experimental method to determine the limit strain by means of thickness variation
-
Efficient automated extraction of local defect resonance parameters in fiber reinforced polymers using data compression and iterative amplitude thresholding
-
- Journal Article
- A1
- open access
POD‐identification reduced order model of linear transport equations for control purposes
-
An isogeometric approach of static and free vibration analyses for porous FG nanoplates
-
- Journal Article
- A1
- open access
High-resolution 3D weld toe stress analysis and ACPD method for weld toe fatigue crack initiation
-
A review on fretting wear mechanisms, models and numerical analyses
-
Weak and strong from meshless methods for linear elastic problem under fretting contact conditions
-
Structural stabilizing effect of SEBSgMAH on a PP-PET blend for multiple mechanical recycling
-
Geometrical size effect in the fatigue life predictions of aluminum wires with micro holes using methods of the critical distance
-
Size-dependent nonlinear analysis and damping responses of FG-CNTRC micro-plates
-
Electrochemical hydrogen charging to simulate hydrogen flaking in pressure vessel steels
-
First observation by EBSD of martensitic transformations due to hydrogen presence during straining of duplex stainless steel
-
A high-order mixed polygonal finite element for incompressible Stokes flow analysis
-
Static and fatigue behaviors of short glass fiber–reinforced polypropylene composites aged in a wet environment
-
Residual weld stresses in stiffener-to-deck plate weld of an orthotropic steel deck
-
Dynamic analysis of a horizontal oscillatory cutting brush
-
From single asperity to real scale in the wear of agricultural tine
-
Effect of Zn on the grain boundary precipitates and resulting alkaline etching of recycled Al-Mg-Si-Cu alloys
-
The effect of hydrostatic stress on the hydrogen induced mechanical degradation of dual phase steel : a combined experimental and numerical approach
-
Tribo-mechanical interpretation for advanced thermoplastics and the effects of wear-induced crystallization
-
Model-based interpretation of thermal desorption spectra of Fe-C-Ti alloys
-
The size-dependent thermal bending and buckling analyses of composite laminate microplate based on new modified couple stress theory and isogeometric analysis
-
Weldability of high-strength aluminium alloy EN AW-7475-T761 sheets for aerospace applications, using refill friction stir spot welding
-
Constraint corrected cycle-by-cycle analysis of crack growth retardation under variable amplitude fatigue loading
-
Assessment of the potential of hydrogen plasma charging as compared to conventional electrochemical hydrogen charging on dual phase steel
-
Quantitative description between pre-fatigue damage and residual tensile properties of P92 steel
-
Irreversible time-dependent rheological behavior of cement slurries : constitutive model and experiments
-
Effect of stress gradient and quadrant averaging on fretting fatigue crack initiation angle and life
-
A modification on velocity terms of Reynolds equation in a spherical coordinate system
-
Creep rate based time-to-failure prediction of adhesive anchor systems under sustained load
-
A hierarchical hyperelastic-based approach for multi-scale analysis of defective nano-materials