Show
Sort by
-
Indoor air purification by VOC abatement using photocatalytic reactor
-
- Journal Article
- A1
- open access
Advances in design of internals : applications in conventional and process intensification units
-
- Journal Article
- A1
- open access
Computational fluid dynamics simulation of a high-throughput catalytic fixed-bed reactor for total oxidation of methane
-
Maximizing olefin yields for steam cracking of plastic waste pyrolysis oils : an experimental and modeling study
-
Reactive CFD modeling of CO2 absorption in a gas-liquid vortex reactor
-
- Journal Article
- A1
- open access
Enhancing CO2 capture efficiency : computational fluid dynamics investigation of gas-liquid vortex reactor configurations for process intensification
-
- Journal Article
- A1
- open access
Mechanistic insights into methane total oxidation over Cu/Hydroxyapatite catalyst synthesized with β-Cyclodextrin assistance
-
- Journal Article
- A1
- open access
Process intensification of CO2 desorption in a gas–liquid vortex reactor
-
Reactive flow CFD simulation for VOC abatement : model validation using experimental data for propane total oxidation
-
- Journal Article
- A1
- open access
Determining the fouling tendency of different feedstocks in the Fouling Assessment Setup
-
Process intensification of CO2 capture by gas-liquid vortex technology
-
CFD simulations and surrogate modeling approach of photocatalytic reactor for ethanol oxidation
-
Model development of gas-liquid vortex reactor for process intensification of CO2 capture
-
- Journal Article
- A1
- open access
catchyCFDEM : open-source microkinetic modeling of heterogeneous catalysis in Eulerian-Lagrangian CFD applied to oxidative coupling of methane
-
catchyCFDEM : Euler-Lagrange computational fluid dynamics open-source framework for catalytic reactors
-
Deciphering high-frequency pressure signals in a gas-solid vortex reactor via machine learning
-
CFD simulation of ozone formation from dry air in a novel pin-to plate non-thermal plasma reactor
-
- Journal Article
- A1
- open access
Hydrodynamic CFD-DEM model validation in a gas–solid vortex unit
-
- Journal Article
- A1
- open access
Assessing the CO2 emission reduction potential of steam cracking furnace innovations via computational fluid dynamics : from high-emissivity coatings, over coil modifications to firing control
-
- Journal Article
- A1
- open access
Optimizing air distribution in floor and wall burners of an industrial steam cracking firebox : a CFD study
-
- Journal Article
- A1
- open access
Process intensification of CO2 desorption
-
Numerical and experimental study of an annular photocatalysis reactor to remove VOC in air
-
- Journal Article
- A1
- open access
Design and optimization of gas–liquid vortex unit using computational fluid dynamics (CFD) simulation
-
- Journal Article
- A1
- open access
Hydrodynamic study of the operating window of a stator-rotor vortex chamber reactor
-
- Conference Paper
- C3
- open access
Determining the fouling tendency of different feedstocks in the Fouling Assessment Setup (FAST)
-
- Conference Paper
- C1
- open access
Pyrolysis of polystyrene in a gas-solid vortex reactor
-
- Conference Paper
- C3
- open access
CFD-DEM investigation of a gas-solid vortex reactor geometry for the oxidative coupling of methane
-
- Journal Article
- A1
- open access
Liquid injection in a fluidised bed : temperature uniformity
-
- Journal Article
- A1
- open access
Chemisorption of CO2 in a gas–liquid vortex reactor : an interphase mass transfer efficiency assessment
-
- Journal Article
- A1
- open access
Development of intensified reactors : a process intensification methodology perspective
-
- Journal Article
- A1
- open access
Experimental study on the temperature distribution in fluidised beds
-
- Conference Paper
- C3
- open access
CFD simulation of a gas-liquid vortex reactor for CO2 capture
-
- Journal Article
- A1
- open access
Speeding up turbulent reactive flow simulation via a deep artificial neural network : a methodology study
-
Development of an active and mechanically stable catalyst for the oxidative coupling of methane in a gas–solid vortex reactor
-
- Conference Paper
- C3
- open access
Reactive CFD-DEM simulations for the oxidative coupling of methane in a gas-solid vortex reactor
-
- Journal Article
- A1
- open access
Micromixing in a gas–liquid vortex reactor
-
Feasibility of biogas and oxy-fuel combustion in steam cracking furnaces : experimental and computational study
-
- Journal Article
- A1
- open access
Biomass fast pyrolysis in an innovative gas-solid vortex reactor : experimental proof of concept
-
- Journal Article
- A1
- open access
The effect of refractory wall emissivity on the energy efficiency of a gas-fired steam cracking pilot unit
-
- Journal Article
- A1
- open access
Deposition of hybrid photocatalytic layers for air purification using commercial TiO2 powders
-
- Conference Paper
- C1
- open access
CFD-DEM model validation study of the bed hydrodynamics in a GSVU
-
- Conference Paper
- C1
- open access
CFD simulation for gas-liquid vortex reactor design
-
Liquid hydrodynamics in a gas-liquid vortex reactor
-
- Conference Paper
- C3
- open access
CFD simulation of gas-liquid hydrodynamics in a gas-liquid vortex reactor
-
- Conference Paper
- C3
- open access
Process intensification in a gas-liquid vortex reactor
-
Design and optimization of a gas-liquid vortex reactor by computational fluid dynamics
-
- Conference Paper
- C3
- open access
CFD-DEM simulations of a gas-solid vortex reactor
-
- Conference Paper
- C3
- open access
Process intensification in a novel gas-liquid vortex reactor : a study on interphase mass transfer parameters
-
- Conference Paper
- C3
- open access
Micromixing in a gas-liquid vortex reactor : an experimental and numerical study
-
- Journal Article
- A1
- open access
Fouling in a steam cracker convection section part 1 : a hybrid CFD-1D model to obtain accurate tube wall temperature profiles
-
Determination of the lead oxide fouling mechanisms in lead bismuth eutectic coolant
-
Fouling in a steam cracker convection section part 2 : coupled tube bank simulation using an improved hybrid CFD-1D model
-
Experimental investigation on the oxygen cold trapping mechanism in LBE-cooled systems
-
- Conference Paper
- C3
- open access
CFD-DEM simulation of gas-solid fluidized beds with detailed heterogeneous chemistry
-
Computational fluid dynamics-based study of novel technologies in the steam cracking process
-
Formation and transport of lead oxide in a non-isothermal lead-bismuth eutectic loop
-
Fast pyrolysis of polyethylene in the gas-solid vortex reactor
-
Computational fluid dynamics-based studies of multiphase reactive flows
-
An experimental and numerical study of the suppression of jets, counterflow, and backflow in vortex units
-
Validation of a temperature dependent 3D numerical droplet impingement simulation procedure to predict splash/non-splash behavior
-
Azimuthal and radial flow patterns of 1g-Geldart B-type particles in a gas-solid vortex reactor
-
Oxidative coupling of methane in a gas-solid vortex reactor
-
Fast pyrolysis of pine biomass in a gas solid vortex reactor
-
Proof of concept CFD study of polystyrene pyrolysis in a gas-solid vortex reactor
-
Computational fluid dynamics-based study of a high emissivity coil coating in an industrial steam cracker
-
Operational range of a gas-solid vortex unit
-
Computational fluid dynamics-assisted process intensification study for biomass fast pyrolysis in a gas–solid vortex reactor
-
CFD-based Biomass Fast Pyrolysis Simulations in a Gas-Solid Vortex Reactor demonstrating Process Intensification
(2018) -
- Conference Paper
- C1
- open access
IMPROOF : integrated model guided process optimization of steam cracking furnaces
-
Computational fluid dynamics-based study of novel technologies in the steam cracking process
(2018) -
Experimental demonstration of biomass fast pyrolysis in the gassolid vortex reactor
-
- Conference Paper
- C3
- open access
'Pas de deux' of high-temperature alloy and 3D reactor technology for steam cracking coils : impact on product yields and coke formation
-
- Conference Paper
- C3
- open access
Computational fluid dynamics-based study of the steam cracking process using a Hybrid 3D-1D approach
-
- Conference Paper
- C3
- open access
Fouling in a steam cracker convection section part 1 : a hybrid CFD-1D model to obtain accurate tube wall temperature profiles
(2018) -
On the mechanisms of secondary flows in a Gas Vortex Unit
-
On near-wall jets in a disc-like gas vortex unit
-
Design and cold flow testing of a Gas-Solid Vortex Reactor demonstration unit for biomass fast pyrolysis
-
A drag model for the gas-solid vortex unit
-
Thermal fouling of heat exchanger tubes due to heavy hydrocarbon droplets impingement
-
- Journal Article
- A1
- open access
Nucleation and growth of lead oxide particles in liquid lead-bismuth eutectic
-
- Conference Paper
- C1
- open access
CFD-assisted Process Intensification for biomass fast pyrolysis in Gas-Solid Vortex Reactor technology
(2017) -
- Conference Paper
- C3
- open access
Computational fluid dynamics simulations of biomass fast pyrolysis in a gas-solid vortex reactor
(2017) -
- Conference Paper
- C3
- open access
Accurate tube wall temperature by coupled simulation of a steam cracker convection section
(2017) -
- Conference Paper
- C3
- open access
Improof : integrated model guided process optimization of steam cracking furnaces
(2017) -
- Conference Paper
- P1
- open access
IMPROOF : integrated model guided process optimization of steam cracking furnaces
(2017) SUSTAINABLE DESIGN AND MANUFACTURING 2017. In Smart Innovation Systems and Technologies 68. p.589-600 -
Experimentally validated numerical study of gas-solid vortex unit hydrodynamics
-
Volume-of-fluid simulations of bubble dynamics in a vertical Hele-Shaw cell
-
- Conference Paper
- C3
- open access
Reactive and non-reactive riser flow: numerical and experimental study
(2016) -
- Conference Paper
- C3
- open access
Numerical and Experimental Study of Secondary Flow Features in a Gas Vortex Unit
(2016) -
- Conference Paper
- C3
- open access
Development of a 1D simulation model for a steam cracker convection section
(2016) -
- Conference Paper
- C3
- open access
Development of a one-Dimensional boiling model: Part I – A two-phase flow pattern map for a heavy hydrocarbon feedstock
(2016) -
- Conference Paper
- C1
- open access
Semi-empirical drag correlation for a Gas Solid Vortex Reactor starting from the radial momentum balances
(2016) -
1D model for coupled simulation of steam cracker convection section with improved evaporation model
-
Three-component solids velocity measurements in the outlet section of a riser
-
Three-component particle velocity measurements in the bottom section of a riser
-
Impact of radiation models in coupled simulations of steam cracking furnaces and reactors
-
Guidelines for selecting gas-solid vortex reactor operating conditions based on hydrodynamic characteristics
-
Droplet-wall interaction upon impingement of heavy hydrocarbon droplets on a heated wall
-
Solids velocity fields in a cold-flow Gas-Solid Vortex Reactor
-
Radial pressure profiles in a cold-flow gas-solid vortex reactor
-
Simulation of the coking phenomenon in the superheater of a steam cracker
-
Bed stability and maximum solids capacity in a Gas-Solid Vortex Reactor: experimental study
-
CFD simulations of droplet-wall interaction upon impingement of heavy hydrocarbon droplets
-
CFD simulations of droplet-wall interaction upon impingement of heavy hydrocarbon droplets
-
- Journal Article
- A1
- open access
Assessment of a gas-solid vortex reactor for SO2/NOx adsorption from flue gas
-
Development, optimization and scale-up of biodiesel production from crude palm oil and effective use in developing countries
-
CFD simulations based regime map for droplet-wall interaction of multi-component hydrocarbon droplet
-
Design and simulation of gas solid vortex reactor for process intensification of selected reactions
-
Experimental research and analytical modelling of a Gas-Solid Vortex Reactor (GSVR)
-
Flow development in the inlet section of a riser
-
Three-component solids velocity measurements in the middle section of a riser
-
Implementation of homotopy perturbation method to solve a population balance model in fluidized bed
-
- Conference Paper
- C3
- open access
Development, optimization and scale-up of biodiesel production from crude palm oil and effective use in developing countries
-
Probability density function simulation of turbulent reactive gas-solid flow in a Fluid Catalytic Cracking (FCC) riser
-
Applying the direct quadrature method of moments to improve multiphase FCC riser reactor simulation
-
Modeling fast biomass pyrolysis in a gas-solid vortex reactor
-
Simulation of coking in convection section of steam cracker
-
- Journal Article
- A1
- open access
User friendly and flexible Kiliani reaction on ketoses using microreaction technology
-
Simulation of coke formation in the convection section tubes of a steam cracker
-
- Conference Paper
- C3
- open access
Modeling fast biomass pyrolysis in a gas/solid vortex reactor
-
Fouling of convection section tubes due to heavy feeds in a steam cracker
-
- Conference Paper
- C1
- open access
Three-component solids velocity measurements in the middle section of a riser
-
Experimental and computational study of T- and L-outlet effects in dilute riser flow
-
- Conference Paper
- C3
- open access
Application of microreactor technology for cyanohydrin production : extending the scope towards renewable resources
-
Applying the direct quadrature method of moments to improve two-phase gas-solid reactor simulation
-
Fouling of heat exchangers in the convection section of a thermal cracker
-
Comparison of Eulerian-Lagrangian and Eulerian-Eulerian method for dilute gas-solid flow with side inlet
-
Accuracy and convergence rate of steady-state simulation of one-dimensional, reactive gas flow with molar expansion
-
- Conference Paper
- C3
- open access
Computational study of hydrodynamics in a gas/solid vortex reactor
-
Probability density function simulation of turbulent reactive gas-solid flow in an FCC riser
-
Process intensification via centrifugal enhancement in a gas-solid vortex reactor: effect of reaction properties on operating characteristics
-
Numerical analysis of industrial model reactions in a gas/solid rotating bed reactor in a static geometry
-
Experimental investigation of a gas-solid rotating bed reactor with static geometry
-
Mathematics in chemical kinetics and engineering: preface to the MACKIE-2009 special issue
-
Experimental investigation of gas-solid rotating bed reactor in static geometry
-
Steady-state simulation of Fluid Catalytic Cracking riser reactors using a decoupled solution method with feedback of the cracking reactions on the flow
-
Rotating fluidized bed with a static geometry: guidelines for design and operating conditions
-
Modeling the coke formation in the convection section tubes of a steam cracker
-
Micromixing effects on series-parallel and autocatalytic reactions in a turbulent single-phase gas flow
-
Rotating fluidized bed in a static geometry (RFB-SG): determination of a range of stable operating conditions
-
Modeling the evaporation of a hydrocarbon feedstock in the convection section of a steam cracker
-
Understanding segregation and mixing effects in a riser using the quadrature method of moments
-
Probability Density Function (PDF) simulation of turbulent reactive gas-solid flow in a riser
-
Coupled simulation of the flue gas and process gas side of a steam cracker convection section
-
- Conference Paper
- C1
- open access
Analysis of a transport equation for molar mass for steady-state simulation of reactive flow with variable, volumetric expansion
-
- Conference Paper
- C1
- open access
Application of Homotopy Perturbation Method (HPM) to solve particle population balance model of a circulating fluidized bed
-
Rotating fluidized bed in a static geometry (RFB-SG): determination of a range of stable operating conditions
-
- Conference Paper
- C3
- open access
Experimental investigation of rotating fluidized bed in static geometry
-
- Journal Article
- A1
- open access
CFD modeling of all gas-liquid and vapor-liquid flow regimes predicted by the Baker chart
-
Evaluation of high-emissivity coatings in steam cracking furnaces using a non-grey gas radiation model
-
Coupled simulation of the convection section of a steam cracker
-
Probability Density Function simulation (PDF) of turbulent reactive gas-solid flow in a FCC riser
-
Probability Density Function simulation of turbulent reactive gas-solid flow in a riser
-
Experimental investigation of a rotating fluidized bed in a static geometry
-
Impact of radiation models in CFD simulations of steam cracking furnaces
-
Multiscale modeling of turbulent combustion and NOx emission in steam crackers
-
Simulation of pilot- and industrial-scale vinyl chloride batch suspension polymerization reactors
-
Assessment of filtered gas-solid momentum transfer models via a linear wave propagation speed test
-
Experimental study of inlet phenomena of 35 degrees inclined non-aerated and aerated Y-inlets in a dilute cold-flow riser
-
Radiative Aspects of Turbulent Premixed Combustion in Long Flame Gas Fired Furnaces
-
Speeding up gas-solid flow calculations with variable gas density
-
A rotating fluidized bed in a static geometry: experimental proof of concept
-
Experimental and numerical study of the new concept of a rotating fluidized bed in a static geometry
-
Development of a fundamental kinetic model for the simulation of pilot- and industrial scale batch suspension polymerization reactors
-
Accounting for large density variations in the steady-state simulation of fluid catalytic cracking
-
Experimental investigation of a rotating fluidized bed in a static geometry
-
Filtered gas-solid momentum transfer models and their application to 3D steady-state riser simulations
-
Experimental investigation of a rotating fluidized bed in a static geometry
-
Gray/nongray gas radiation modeling in steam cracker CFD calculations
-
CFD simulations of steam cracking furnaces using detailed combustion mechanisms
-
Simulation of the decoking of an ethane cracker with a steam/air mixture
-
Development of reduced combustion mechanisms for premixed flame modeling in steam cracking furnaces with emphasis on NO emission
-
Optimization of the decoking procedure of an ethane cracker with a steam/air mixture
-
A rotating fluidized bed in a static geometry: experimental proof of concept
-
Comparative study of radiation models in steam cracking furnaces
-
Preconditioning for Eulerian-Eulerian Gas-Solid Flow Calculations
-
Preconditioning applied to Eulerian-Eulerian Gas-Solid Flow Calculations with Variable Gas Density
-
Comparison of a fully coupled and a decoupled solver for the simulation of Fluid Catalytic Cracking
-
Modeling of NOx Emission in Turbulent Premixed Combustion in Steam Cracking Furnaces
-
Coupling of turbulent pre-mixed combustion with radiation phenomena in steam cracking furnaces
-
Filtered gas-solid momentum transfer models and their application to 3D steady state riser simulations
-
3d Steady state riser simulations using filtered gas-solid momentum transfer models
-
Coke combustion and gasification kinetics in ethane steam crackers
-
Gas-solids mixing in the inlet zone of a dilute circulating fluidized bed
-
Simultaneous solution algorithms for Eulerian-Eulerian gas-solid flow models: Stability analysis and convergence behaviour of a point and a plane solver
-
Estimation of intrinsic rate coefficients in vinyl chloride suspension polymerization
-
Banded gas and nongray surface radiation models for high-emissivity coatings
-
Experimental study of gas-solid flow in risers
-
Characteristic speeds from non-filtered and filtered continuum gas-solid flow models
-
Full versus partial coupling of flow and reaction in the simulation of catalytic cracking riser flow
-
Preconditioning for non-filtered and filtered Eulerian-Eulerian gas-solid flow models
-
Experimental and computational study of T- and L-outlet effects in a dilute circulating fluidized bed pilot riser
-
Preconditioning for the simultaneous solution of gas-solid flows
-
Effect of radial temperature profiles on yields in steam cracking
-
Effect of clustering on gas-solid drag in dilute two-phase flow
-
Diffusion-controlled reactions in vinyl chloride suspension polymerization
-
CFD simulation of dilute phase gas-solid riser reactors: Part I - a new solution method and flow model validation
-
CFD simulation of dilute phase gas-solid riser reactors: part II - simultaneous adsorption of SO2-NOx from flue gases
-
Experimental and numerical study of gas-solid flow in a pilot-scale cold-flow riser using Fluent 6.1.22
-
The impact of the inlet configuration, the riser diameter and turbulence on Gas-Solid mixing in the Inlet zone of a riser
-
High-emissivity coatings on reactor tubes and furnace walls in pyrolysis furnaces
-
CFD Modeling of Thermal Cracking Furnaces using Detailed Combustion Mechanisms
-
Simultaneous solution algoritms for gas-solid flows: an efficient parallel line solver
-
Experimental study of gas-solid flow in risers
-
A Gradient instead of a Source Term Approach for Gas-Solid Interactions in Eulerian Eulerian Gas-Solid Flow Models
-
Validation Study of gas-solid flow in a pilot-scale circulating fluidized bed riser
-
Estimation of intrinsic rate coefficients in vinyl chloride suspension polymerization
-
High-emissivity coatings on reactor tubes and furnace walls in steam cracking furnaces
-
Steam cracking: from molecule to furnace
-
11. Stability Analysis of Simultaneous Solution Algorithms for Gas-Solid Flow Calculations: Point and Line Method
-
Gas-Solids Mixing in the Inlet Zone of a Circulating Fluidized Bed
-
Steam cracking: from molecule to furnace
-
Experimental and numerical study of gas-solid flow in circulating fluidized beds
-
Three-dimensional simulation of a fluid catalytic cracking riser reactor
-
The effects of abrupt T-outlets in a riser: 3D simulation using the kinetic theory of granular flow
-
Calculation of three-dimensional flow and pressure fields in cracking furnaces
-
TiO2 films prepared by DC magnetron sputtering from ceramic targets.
-
An extension of the preconditioned advection upstream splitting method for 3D two-phase flow calculations in circulating fluidized beds.
-
Transient 3D Simulation of the turbulent gas solid flow in large scale risers using a density based solution algorithm
-
An extension of the preconditioned advection upstream splitting method to two-phase flows for the 3D calculation of circulating fluidized bed flow patterns.
-
Calculation of transient flow in circulating fluidized beds with straight and double abrupt outlet configuration: relation with the inelasticity of the particle-particle collisions.
-
Three-dimensional flow patterns in cracking furnaces with long-flame burners.
-
Simultaneous adsorption of SO2-NOx from flue gases in a riser configuration.
-
Development of a transient kinetic model for the simultaneous adsorption of SO2-NOx over Na/gamma-Al2O3 sorbent.
-
Three-dimensional asymmetric flow and temperature fields in cracking furnaces.
-
Simulation and comparison of the run length of an ethane cracking furnace with reactor tubes of circular and elliptical cross sections.
-
XPD investigation of V2O5/TiO2 anatase model catalysts.
-
A pyrolysis furnace with reactor tubes of elliptical cross section.
-
A SHELL-AND-TUBE PYROLYSIS REACTOR FOR OLEFIN PRODUCTION.
-
CIRCUMFERENTIAL TUBE SKIN TEMPERATURE PROFILES IN THERMAL-CRACKING COILS.
-
Modeling and simulation of a honeycomb reactor for high-severity thermal cracking