Show
Sort by
-
- Journal Article
- A1
- open access
Multi-point monitoring of nitrous oxide emissions in three full-scale conventional activated sludge tanks in Europe
-
Technical and economic assessment of real-time control strategies for micropollutant removal by ozonation at pilotscale
-
Technical and economic assessment of real-time control strategies for micropollutant removal by ozonation at pilot-scale
-
- Conference Paper
- P1
- open access
Multi-point monitoring of nitrous oxide emissions and aeration efficiency in a full-scale conventional activated sludge tank
-
Evaluation of the impact of wet-weather events on Influent Flow and Loading of Water Resource Recovery Facility
-
- Conference Paper
- C3
- open access
Towards improved solid-liquid separation in High Rate Activated Sludge systems by unravelling flocculation behaviour
-
Model-based optimisation of design and operation of bioreactors with a focus on gas-liquid mass transfer
-
- Conference Paper
- C3
- open access
Towards a general model for twin-screw wet granulation : application of a novel validated PBM model to a hydrophilic compound and linking model parameters to blend properties
-
- Journal Article
- A1
- open access
A methodology to model environmental preferences of EPT taxa in the Machangara River Basin (Ecuador)
-
On constitutive functions for hindered settling velocity in 1-D settler models : selection of appropriate model structure
-
Full-scale direct contact membrane distillation (DCMD) model including membrane compaction effects
-
Towards advanced aeration modelling : from blower to bubbles to bulk
-
Concentration-driven models revisited : towards a unified framework to model settling tanks in water resource recovery facilities
-
- Journal Article
- A1
- open access
Elucidation and visualization of solid-state transformation and mixing in a pharmaceutical mini hot melt extrusion process using in-line Raman spectroscopy
-
- Conference Paper
- C3
- open access
A dynamic model for reverse osmosis as part of decision support tool for water fit-for-use
-
- Conference Paper
- C3
- open access
Spatio-temporal modelling of filter cake formation in filtration processes
-
- Conference Paper
- C3
- open access
Acoustic positioning telemetry in reflective environments : a practical guidance for error analysis
-
- Conference Paper
- C3
- open access
Eel behaviour at navigation locks : finding the true path in acoustic telemetry data
-
Application of iterative robust model-based optimal experimental design for the calibration of biocatalytic models
-
- Conference Paper
- C3
- open access
Visualization of compaction behavior of pharmaceutical powders in solid-dosage manufacturing using finite element analysis
-
- Conference Paper
- C3
- open access
Kinetic model of hexanoic acid production by Clostridium kluyveri shows product toxicity even at neutral pH
-
- Conference Paper
- C3
- open access
Kinetic model of hexanoic acid production by Clostridium kluyveri shows product toxicity even at neutral pH
-
Surrogate-based correlation models in view of real-time control of ozonation of secondary treated municipal wastewater-model development and dynamic validation
-
To mix, or not to mix, that is the question
-
- Conference Paper
- C3
- open access
From online data to model input : a flexible open source data analysis tool
-
Sensor location in WRRFs : easy change, big win
-
- Conference Paper
- C1
- open access
Methodology and pitfalls when calibrating a PBM : the case of twin-screw wet granulation
-
A model with spatial dependence for Reverse Osmosis : global sensitivity analysis
-
- Conference Paper
- C3
- open access
Automating the raw data to model input process : an open Python™ package
-
Methodology and pitfalls when calibrating a PBM : the case of twin-screw wet granulation
-
- Conference Paper
- C3
- open access
Characterization of full-scale sludge viscosity and density: Testing the stratification hypothesis
(2017) -
- Conference Paper
- C3
- open access
Extension of a mechanistic model for drying of single pharmaceutical granules to semi-continuous fluid bed drying
-
- Conference Paper
- C3
- open access
Towards a general model for twin-screw wet granulation : development and calibration of a novel three compartmental PBM model
-
- Conference Paper
- C3
- open access
Towards a general model for twin-screw wet granulation : validation of a PBM model through linking calibrated model parameters to process conditions
-
- Conference Paper
- C3
- open access
Applying inline spatial filter velocimetry to improve process robustness of a continuous twin-screw wet granulator
-
- Journal Article
- A1
- open access
Quantitative risk assessment via uncertainty analysis in combination with error propagation for the determination of the dynamic Design Space of the primary drying step during freeze-drying
-
In-depth experimental analysis of pharmaceutical twin-screw wet granulation in view of detailed process understanding
-
- Journal Article
- A1
- open access
Empirical sewer water quality model for generating influent data for WWTP modelling
-
Numerical solution of a multi-class model for batch settling in water resource recovery facilities
-
Full-scale validated Air Gap Membrane Distillation (AGMD) model without calibration parameters
-
- Journal Article
- A1
- open access
Modelling the primary drying step for the determination of the optimal dynamic heating pad temperature in a continuous pharmaceutical freeze-drying process for unit doses
-
How well-mixed is well mixed? : hydrodynamic-biokinetic model integration in an aerated tank of a full-scale water resource recovery facility
-
PCA as tool for intelligent ultrafiltration for reverse osmosis seawater desalination pretreatment
-
Kinetic exploration of intracellular nitrate storage in marine microalgae
-
- Conference Paper
- C3
- open access
Kinetic model of hexanoic acid production by Clostridium kluyveri shows product toxicity even at neutral pH
-
- Conference Paper
- C3
- open access
Exploring the effect of non-ideal mixing using an ADM1 based model
-
- Journal Article
- A1
- open access
Mechanistic modelling of infrared mediated energy transfer during the primary drying step of a continuous freeze-drying process
-
- Conference Paper
- C3
- open access
Full-scale air gap membrane distillation (AGMD) model, opportunities for module design improvement
-
Automating the raw data to model input process using flexible open source tools
-
- Conference Paper
- C3
- open access
Advanced process control practices for continuous pharmaceutical twin-screw wet granulation
-
Model based analysis of the growth kinetics of microalgal species residing in a waste stabilization pond
-
Pressing topics in the Belgian water sector anno 2015
-
Good modelling practice in applying computational fluid dynamics for WWTP modelling
-
Real-time control of micropollutant removal by ozonation at pilot-scale
-
- Conference Paper
- C3
- open access
Optimisation of fermentation and extraction for production of medium chain fatty acids (MCFA)
-
Modeling the settling behavior in virgin olive oil from a horizontal screw solid bowl
-
Energy efficient treatment of A-stage effluent : pilot-scale experiences with shortcut nitrogen removal
-
- Conference Paper
- C1
- open access
Real-time control of micropollutant removal by ozonation at pilot-scale
-
- Conference Paper
- C1
- open access
Real-time control of micropollutant removal from secondary effluent by ozonation
-
Modelling and sensitivity analysis of urinary platinum excretion in anticancer chemotherapy for the recovery of platinum
-
A dynamic design space for primary drying during batch freeze-drying
-
Influence of membrane thickness and process conditions on direct contact membrane distillation at different salinities
-
Validation of a microalgal growth model accounting with inorganic carbon and nutrient kinetics for wastewater treatment
-
The use of a combined respirometric-titrimetric setup to assess the effect of environmental conditions on micro-algal growth rate
-
Model-based analysis of a twin-screw wet granulation system for continuous solid dosage manufacturing
-
Calibration and analysis of a direct contact membrane distillation model using Monte Carlo filtering
-
Simulations of reactive settling of activated sludge with a reduced biokinetic model
-
Detailed off-gas measurements for improved modelling of the aeration performance at the WWTP of Eindhoven
-
CFD for wastewater treatment : an overview
-
The use of rheology combined with differential scanning calorimetry to elucidate the granulation mechanism of an immiscible formulation during continuous twin-screw melt granulation
-
Development of a process map : a step towards a regime map for steady-state high shear wet twin screw granulation
-
The use of rheology to elucidate the granulation mechanisms of a miscible and immiscible system during continuous twin-screw melt granulation
-
- Conference Paper
- C3
- open access
Decision support tool for the optimization of Membrane Distillation modules and systems
-
- Conference Paper
- C3
- open access
Prediction of turbulent reactive flows by means of numerical simulations applied to anaerobic digesters
-
- Conference Paper
- C3
- open access
Development of a decision support tool for water fit-for-use
-
- Conference Paper
- C3
- open access
Analysis of inline spatial filter velocimetry for granule size feedback control of a continuous pharmaceutical twin-screw granulator
-
- Conference Paper
- C1
- open access
Image analysis procedure to derive bubble size distributions for better understanding of the oxygen transfer mechanism
-
- Conference Paper
- C3
- open access
Kinetic parameter estimation including uncertainty under mass transfer limited conditions
-
- Conference Paper
- C3
- open access
Characterization of compaction behaviour of powders in solid-dosage manufacturing using finite element analysis
-
- Conference Paper
- C3
- open access
Methodology and pitfalls when calibrating a PBM : the case of twin-screw wet granulation
-
- Conference Paper
- C3
- open access
Applying supervisory process control practices to continuous pharmaceutical manufacturing
-
- Conference Paper
- C3
- open access
Model-based process analysis in continuous manufacturing of pharmaceuticals : calibration of a fluid bed dryer model
-
A realistic dynamic blower energy consumption model for wastewater applications
-
Linking granulation performance with residence time and granulation liquid distributions in twin-screw granulation : an experimental investigation
-
Uncertainty analysis as essential step in the establishment of the dynamic Design Space of primary drying during freeze-drying
-
- Conference Paper
- C3
- open access
Resource recovery from wastewater: translating theory into practice
-
- Conference Paper
- C1
- open access
Kinetic exploration of the microalgal growth rate of species residing in a waste stabilization pond
-
A generic model-based methodology for quantification of mass transfer limitations in microreactors
-
- Conference Paper
- C3
- open access
Model-based optimization of chiral amine synthesis and removal by membrane process intensification
-
Modelling of two-stage WWT systems: a faster road towards resource recovery
-
Towards advanced aeration modelling: from blower to bubbles to bulk
-
Use of artificial intelligence for WRRF knowledge based N2O model selection
-
Towards improved membrane fouling modelling: from an empirical to a spatially explicit framework
-
- Conference Paper
- C3
- open access
Behaviour of downstream migrating European eel at sluices and turbines
-
Quantifying the importance of flow maldistribution in numbered-up microreactors
-
The potential of using microreactors for the enzymatic production of unstable intermediates
-
Concentration-driven models revisited: towards a unified framework to model settling tanks in WWTPs
-
- Conference Paper
- C3
- open access
Macroinvertebrate based mathematical models for the prediction of microbial pathogens in rivers
-
Robust fluorescence and UV-VIS correlation models for real-time control and assessment of micropollutant removal from secondary effluent using ozonation
-
Impact on sludge inventory and control strategies using the benchmark simulation model no. 1 with the Burger-Diehl settler model
-
A generalized cellular automata approach to modeling first order enzyme kinetics
-
Modeling the anaerobic digestion of canemolasses vinasse: extension of the Anaerobic Digestion Model No. 1 (ADM1) with sulfate reduction for a very high strength and sulfate rich wastewater
-
Model-based evaluation of mechanisms and benefits of mainstream shortcut nitrogen removal processes
-
Modelling approaches in membrane distillation: a critical review
-
From the affinity constant to the half-saturation index: understanding conventional modeling concepts in novel wastewater treatment processes
-
Population balance models: a useful complementary modelling framework for future WWTP modelling
-
Effect of sensor location on controller performance in a wastewater treatment plant
-
Dynamic identifiability analysis-based model structure evaluation considering rating curve uncertainty
-
Computational fluid dynamics in water and wastewater processes
-
The effect of fine bubble aeration intensity on membrane bioreactor sludge characteristics and fouling
-
Conceptual framework for model-based analysis of residence time distribution in twin-screw granulation
-
- Conference Paper
- C1
- open access
Model-based analysis of mass transfer limitations in microreactors
-
- Conference Paper
- C3
- open access
Calibration and analysis of a direct contact membrane distillation model using the GLUE method
-
- Conference Paper
- C3
- open access
Experimental investigation of the link between granulation performance, residence time and granulation liquid distribution in twin-screw granulation
-
- Conference Paper
- C3
- open access
Combined experimental and computational approach to elucidate the twin-screw granulation process
-
- Conference Paper
- C3
- open access
Model-based optimization of the primary drying step during freeze-drying
-
- Conference Paper
- C3
- open access
Towards model-based control of granule moisture content during continuous wet granulation
-
Modelling and characterization of primary settlers in view of whole plant and resource recovery modelling
-
Gaining process knowledge by using mechanistic models for fluidized bed drying in a continuous manufacturing environment
-
Spatio-temporal modelling of filter cake formation in membrane bioreactors
-
Critical analysis of constitutive functions for hindered settling velocity in 1-D settler models
-
Towards improved accuracy in modelling aeration efficiency by accounting for bubble size distribution dynamics
-
Impact of the flocculation state on hindered and compression settling: experimental evidence and overview of available modelling frameworks
-
Ecological evaluation criteria driving integrated urban water quality modelling and system optimisation
-
- Conference Paper
- C3
- open access
Analysis of a twin-screw granulation process using a combined experimental and computational approach
-
- Conference Paper
- C3
- open access
Development of regime map for steady-state high shear wet twin-screw granulation
-
Calibration and analysis of a direct contact membrane distillation model using the GLUE method
-
Calibration and analysis of a direct contact membrane distillation model using Monte Carlo filtering
-
Successful model validation of flux and energy efficiency at full scale using a model calibrated at lab-scale
-
Operation of direct contact membrane distillation at high salinities: evaluation of membrane properties and process conditions
-
Robust fluorescence and UV-VIS correlation models for real-time control of micropollutant removal from secondary effluent using ozonation
-
A research approach to capture water value
-
- Conference Paper
- C3
- open access
Full-scale model validation of flux and energy efficiency for a direct contact membrane distillation module
-
- Conference Paper
- C3
- open access
A case study on robust optimal experimental design for model calibration of ω-transaminase
-
A research approach to capture water value
-
Experimental investigation linking granulation performance with Residence time and granulation liquid distributions in TwinScrew granulation
-
Detailed simulation of particle and liquid distribution in the mixing zone of a TwinScrew granulator
-
Evaluation of an in-line particle imaging tool for monitoring twin-screw granulation performance
-
- Conference Paper
- C3
- open access
Developing monitoring and control strategies for emerging contaminant removal from wastewater using ozonation
-
Toward energy-neutral wastewater treatment: a high-rate contact stabilization process to maximally recover sewage organics
-
- Conference Paper
- C3
- open access
Developing monitoring and control strategies for emerging contaminant removal from wastewater using ozonation
-
Robust correlation models for real-time control of micropollutant removal from wastewater using ozonation
-
- Conference Paper
- C1
- open access
Computational fluid dynamics : an important modelling tool for the water sector
-
- Conference Paper
- C1
- open access
Towards intelligent ultrafiltration for reverse osmosis seawater desalination pretreatment by means of PCA
-
- Conference Paper
- C3
- open access
Experimental investigation of residence time, granulation liquid and granule size distributions in twin-screw granulation
-
- Conference Paper
- C3
- open access
How to operate direct contact membrane distillation at high salinities: evaluation of membrane properties and process conditions
-
Detailed off-gas measurements for improved modelling of the aeration performance at the WWTP of Eindhoven
-
Calibration of the WWTP of Eindhoven model
-
Application of a colour-based system analysis tool at the WWTP of Eindhoven
-
- Conference Paper
- C3
- open access
Investigation of twin screw granulation : integrating experimental and computational approaches
-
Model-based optimization of the primary drying step during freeze-drying
-
A numerical procedure for model identifiability analysis applied to enzyme kinetics
-
pyIDEAS: an open source Python package for model analysis
-
Model-based characterisation of twin-screw granulation system for continuous solid dosage manufacturing
-
- Conference Paper
- C3
- open access
Determination of physical-chemical conditions to predict macroinvertebrate communities in Machangara River (Southern Andes, in Ecuador)
-
- Conference Paper
- C3
- open access
Interactive model evaluation tool based on IPython notebook
-
- Conference Paper
- C3
- open access
Hydropy : Python package for hydrological time series handling based on Python Pandas
-
UV-VIS spectral analysis as a key process tool for removal of pharmaceuticals from secondary effluent by ozonation
-
Mixing and transport during pharmaceutical twin-screw wet granulation : experimental analysis via chemical imaging
-
Comparison of techniques for reconstruction of a distribution from moments in the context of a pharmaceutical drying process
-
Global sensitivity analysis applied to drying models for one or a population of granules
-
Analysing drying unit performance in a continuous pharmaceutical manufacturing line by means of mass-energy balances
-
Kinetic exploration of nitrate-accumulating microalgae for nutrient recovery
-
Modelling and characterisation of primary settlers in view of whole plant modelling and resource recovery
-
- Conference Paper
- C3
- open access
Experimental investigation of residence time distribution in twin-screw granulation
-
- Conference Paper
- C3
- open access
Experimental investigation of granule shape and size dynamics in twin-screw granulation
-
Process monitoring and modeling of a continuous pharmaceutical from powder to tablet process line using a mass and energy balance
-
A simple yet efficient colour-based system analysis tool for ASM
-
Model-based evaluation of mechanisms and benefits of mainstream shortcut nitrogen removal processes
-
Risk assessment modelling of N2O production in activated sludge systems: a knowledge-based approach
-
Computational Fluid Dynamics as a supportive tool for wastewater treatment plant modelling
-
Population Balance Models: a useful complementary modelling framework for future WWTP modelling
-
- Conference Paper
- C3
- open access
Model-based analysis and experimental validation of residence time distribution in twin-screw granulation
-
Algal community analysis in a waste stabilisation pond
-
A protocol for the use of computational fluid dynamics as a supportive tool for wastewater treatment plant modelling
-
A qualitative model structure sensitivity analysis method to support model selection
-
Salt stress in a membrane bioreactor: dynamics of sludge properties, membrane fouling and remediation through powdered activated carbon dosing
-
Monitoring and modelling of a continuous from-powder-to-tablet process line
-
Benchmark models
-
Benchmarking of control strategies
-
Ring-testing
-
- Journal Article
- A1
- open access
Experimental investigation of granule size and shape dynamics in twin-screw granulation
-
Maximising the benefits of activated sludge modelling
-
Importance of scale and hydrodynamics for modeling anaerobic digester performance
-
- Conference Paper
- C1
- open access
Biotechnological exploration of nitrate-accumulating microalgae for nutrient recovery from saline wastewaters
-
- Conference Paper
- C3
- open access
Development of critical quality attributes control strategies in a continuous high shear wet granulation process
-
Moisture and drug solid-state monitoring during a continuous drying process using empirical and mass balance models
-
Detailed dynamic pumping energy models for optimization and control of wastewater applications
-
- Conference Paper
- C3
- open access
Two-dimensional PBM for simultaneous modelling of drying and breakage of pharmaceutical granules
-
Applying reconstruction methods on the solution of a moment-based pharmaceutical drying process Population Balance Model
-
- Conference Paper
- C3
- open access
Investigation AOB and NOB kinetic parameters for oxygen under moderate climate wastewater conditions
-
- Conference Paper
- C1
- open access
Cost-effective and integrated optimization of the Eindhoven urban wastewater system : step-wise implementation of selected measures
-
- Conference Paper
- C1
- open access
A practical and sound calibration procedure applied to the WWTP of Eindhoven
-
- Conference Paper
- C3
- open access
Calibration and analysis of a direct contact membrane distillation (DCMD) model using the GLUE method
-
- Conference Paper
- C3
- open access
Hydrodynamic-biokinetic model integration applied to a full-scale WWTP
-
- Conference Paper
- C3
- open access
Towards intelligent ultrafiltration for reverse osmosis seawater desalination pretreatment by means of PCA
-
- Conference Paper
- C3
- open access
Evaluation of the optimal membrane thickness for direct contact membrane distillation desalination via modelling and experiments
-
Evaluation of optimal membrane thickness for DCMD via modeling and experiments
-
- Conference Paper
- C1
- open access
Modelling disolved air flotation as pretreatment for reaching low P effluent concentrations with activated sludge
-
- Conference Paper
- C1
- open access
Measuring nitrous oxide emissions from biological wastewater treatment, art or science?
-
A two-dimensional PBM for continuous drying of a population of granules including drying and breakage
-
Development of a population balance model for continuous twin-screw granulation in pharmaceutical manufacturing
-
Development and assessment of an integrated ecological modelling framework to assess the effect of investments in wastewater treatment on water quality
-
- Conference Paper
- C3
- open access
Mechanistic modelling for process understanding of fluidized bed drying process part of a full continuous pharmaceutical manufacturing line
-
- Conference Paper
- C3
- open access
Analysis of salinity and membrane thickness influence on a Direct Contract Membrane Distillation module using the Dusty Gas model
-
- Conference Paper
- C3
- open access
PCA as a tool for intelligent ultrafiltration for reverse osmosis seawater desalination pretreatment
-
- Conference Paper
- C3
- open access
Realistic dynamic blower energy consumption models for activated sludge systems
-
- Conference Paper
- C1
- open access
A novel methodology for the calibration of discrete settling behaviour of activated sludge
-
- Conference Paper
- C1
- open access
Influent composition effects on sludge particle size distributions in an MBR
-
- Conference Paper
- C3
- open access
Experimental and model-based investigation of twin screw granulation: towards more profound process knowledge
-
- Conference Paper
- C1
- open access
UV-VIS spectral analysis as process tool to assess ozone reactivity for secondary effluent
-
A new emperical sewer water quality model for the prediction of WWTP influent quality
-
A model library for dynamic transport and fate of micropollutants in integrated urban wastewater and stormwater systems
-
Balancing effluent quality, economic cost and greenhouse gas emissions during the evaluation of (plant-wide) control/operational strategies in WWTPs
-
Reduction of a single granule drying model: an essential step in preparation of a population balance model with a continuous growth term
-
The incorporation of variability and uncertainty evaluations in WWTP design by means of stochastic dynamic modeling: the case of the Eindhoven WWTP upgrade
-
A combined respirometer-titrimeter for the determination of microalgae kinetics: experimental data collection and modelling
-
Development of a population balance model of a pharmaceutical drying process and testing of solution methods
-
Comparison of ozone and HO˙ induced conversion of effluent organic matter (EfOM) using ozonation and UV/H₂O₂ treatment
-
Integrating hydraulic, physicochemical and ecological models to assess the effectiveness of water quality management strategies for the River Cuenca in Ecuador
-
Tertiaire behandeling van afvalwater met ozon en UV/H2O2: omzetting van organisch materiaal en HO. productie
-
Impact of dissolved organic matter (DOM) on parameter sensitivity of a kinetic ozone decomposition model
-
Cell mass and cell cycle dynamics of an asynchronous budding yeast population: experimental observations, flow cytometry data analysis, and multi-scale modeling
-
Benchmark simulation models, quo vadis?
-
A consistent modelling methodology for secondary settling tanks: a reliable numerical method
-
Activated sludge rheology: a critical review on data collection and modelling
-
Models and control strategies for membrane bioreactors
-
Detecting membrane fouling occurrences in a full-scale membrane bioreactor with principal component analysis
-
Models and control strategies for membrane bioreactors
-
A GLUE uncertainty analysis of a drying model of pharmaceutical granules
-
On data requirements for calibration of integrated models for urban water systems
-
Improved predictions of effluent suspended solids in wastewater treatment plants by integration of a PBM with computational fluid dynamics
-
- Conference Paper
- C1
- open access
Global sensitivity analysis on a PBM-model describing the drying behaviour of wet pharmaceutical granules
-
- Conference Paper
- C1
- open access
Scenario analysis on a PBM describing the drying behaviour of wet pharmaceutical granules
-
- Conference Paper
- C3
- open access
Python package for model STructure ANalysis (pySTAN)
-
- Conference Paper
- C1
- open access
Towards improved 1-D settler modelling : impact on control strategies using the Benchmark Simulation Model
-
- Conference Paper
- C1
- open access
Performance evaluation of the benchmark simulation model for membrane bioreactors extended with membrane filtration and fouling
-
- Conference Paper
- C1
- open access
Detecting membrane fouling occurrences in a full-scale membrane bioreactor with principal component analysis
-
- Conference Paper
- C1
- open access
Effect of sensor location on controller performance in a wastewater treatment plant
-
- Conference Paper
- C1
- open access
Extending the Benchmark Simulation Model no. 2 (BSM2) with detailed models for dynamic pumping energy consumption
-
Multi-objective control of a MBR/CAS full-scale plant
-
The use of mass and energy balances for process monitoring of a full continuous pharmaceutical from powder to tablet manufacturing
-
- Conference Paper
- C3
- open access
Evaluation of particle shape and size evolution during high-shear wet granulatoin using twin-screw granulator
-
- Conference Paper
- C3
- open access
Effects of shear forces on the particle size distribution and viscosity of activated sludge from an MBR pilot plant
-
- Conference Paper
- C3
- open access
Salt stress in MBRs: dynamics of sludge properties, membane fouling and remediation through PAC dosing
-
- Conference Paper
- C3
- open access
Investigating the effect of influent composition on full-scale MBR filtration performance through lab-scale research
-
- Conference Paper
- C3
- open access
Practical application of dynamic process models for wastewater treatment plant optimization : work in progress
-
- Conference Paper
- C1
- open access
Towards improved 1-D settler modelling : calibration of the Bürger model and case study
-
- Conference Paper
- C3
- open access
Using a PBM to describe the drying behaviour of wet pharmaceutical granules : scenario analysis and GSA
-
- Conference Paper
- C3
- open access
Process monitoring of a full continuous pharmaceutical tabletting line : mass and energy balance analysis