Ghent University Academic Bibliography

Your filters: cql: keyword exact "microstructure"

Add to list
- Journal Article
- A1
- open access
Effect of cement content on the pore structure and imbibition rate of lime-cement mortars

Dulce Elizabeth Valdez Madrid (UGent) , Natalia Mariel Alderete (UGent) , Veerle Boterberg (UGent) , Nele De Belie (UGent) and Veerle Cnudde (UGent)

(2026) CEMENT & CONCRETE COMPOSITES. 165.
Add to list
- Conference Paper
- C3
- open access
Coupled matrix-based Monte Carlo simulations for detailed polymer microstructure characterization and material property estimation

Freddy L. Figueira (UGent) , Daria Shestakova (UGent) , Simon Debrie (UGent) , Paul Van Steenberge (UGent) , Mariya Edeleva (UGent) and Dagmar D'hooge (UGent)

(2026) 41st International Conference of the Polymer Processing Society, Book of Abstracts.
Add to list
- Journal Article
- A1
From bicarbonate supersaturation to sweet corrosion : a multiscale study of FeCO3 film development on pipeline steels

Roya Tavangar Rizi (UGent) , Arne Simons (UGent) , Kim Verbeken (UGent) and Tom Depover (UGent)

(2026) ENGINEERING FAILURE ANALYSIS. 196.
Add to list
- Journal Article
- A1
Mechanical properties and microstructure of loess stabilized with nano-silica and lime kiln dust

Mohammad Hadi Hatefi, Mahyar Arabani, Iman Hosseinpour, Meghdad Payan (UGent) and Payam Zanganeh Ranjbar

(2026) PHYSICS AND CHEMISTRY OF THE EARTH. 144.
Add to list
- Journal Article
- A1
Exploring the potential of citrus pectin as stabilizers for fat-free set yogurt : accelerating fermentation, reducing syneresis, and improving texture

Noussaire El Fihry, Ilse De Leersnyder (UGent) , Pieter Vermeir (UGent) , David Laureys (UGent) , Jessika De Clippeleer (UGent) , Filip Van Bockstaele (UGent) , Tony Ruyssen (UGent) , Mia Eeckhout (UGent) , Khalil El Mabrouk and Hassan Hajjaj

(2026) FOOD CHEMISTRY. 498(part 1).
Add to list
- Journal Article
- A1
Effect of thermal neutron shielding on the irradiation hardening and recrystallization of tungsten

Francisco Miranda, Aleksandr Zinovev, Dmitry Terentyev (UGent) , Alexey Stankovskiy, Shuhei Nogami, Philipp Lied, Carsten Bonnekoh, Jelle Van Eyken, Kim Verbeken (UGent) and Thomas Pardoen

(2026) JOURNAL OF NUCLEAR MATERIALS. 633.
Add to list
- Journal Article
- A1
Combined laser shock peening and shot peening for improving fretting wear and low-cycle fatigue performance of Ti-6Al-4V

Zhiguo Wang, Jianxin Liu (UGent) , Ke Li, Xiuyang Fang, Magd Abdel Wahab (UGent) and Zhenbing Cai

(2026) OPTICS AND LASER TECHNOLOGY. 203(part E).
Add to list
- Journal Article
- A2
- open access
Synergistic use of water treatment sludge and silica fume in geopolymer binders for stabilization/solidification of heavy metals in construction waste

Hassan Ahmadi Golabkharan, Payam Zanganeh Ranjbar, Meghdad Payan (UGent) , Mahyar Arabani, Mohammad Mahdi Shalchian, Mahdi Salimi and Mahan Salimi Khoshdel

(2026) CLEANER MATERIALS. 21.
Add to list
- Journal Article
- A2
Arc-based directed energy deposition (DED-Arc) of 7xxx Series Al–Zn–Mg–Cu alloys : a review

Igor Oliveira Felice, Rafael Gomes Nunes Silva (UGent) , Wim Verlinde, Koen Faes, Wim De Waele (UGent) , Matthieu Lezaack and Aude Simar

(2026) PROGRESS IN ADDITIVE MANUFACTURING. 11(6). p.6003-6028
Add to list
- Journal Article
- A1
- open access
Influence of hydrogen and orientation on the fracture toughness and strength of X70 pipeline steel

Amir Karimi, Md Fahadul Wahab Chowdhury, Jeffrey Venezuela, Clotario V. Tapia-Bastidas, Joshua Hoschke, Maximilian Roethig, Milos B. Djukic, Tom Depover (UGent) , Kim Verbeken (UGent) and Andrej Atrens

(2026) INTERNATIONAL JOURNAL OF HYDROGEN ENERGY. 220.
Add to list
- Journal Article
- A1
- open access
The benefits of insoluble soybean fibre on the properties of acid-induced skimmed milk gels : mechanistic insights from the acidification process

Bifen Chen, Congmei Hu, Yongda Lei, Xiujie Zhao, Shuguang Wang, Yongjian Cai, Qiangzhong Zhao, Mouming Zhao and Paul Van der Meeren (UGent)

(2026) LWT-FOOD SCIENCE AND TECHNOLOGY. 239.
Add to list
- Journal Article
- A2
- open access
Sustainable strength development of construction and demolition waste using water treatment sludge, silica fume, and jute fiber for geopolymer-based pavement subgrades

Mahan Salimi Khoshdel, Hassan Ahmadi Golabkharan, Meghdad Payan (UGent) , Iman Hosseinpour, Mahyar Arabani, Payam Zanganeh Ranjbar, Mahdi Salimi and Mohammad Mahdi Shalchian

(2026) RESULTS IN ENGINEERING. 29.
Add to list
- Journal Article
- A1
- open access
The role of backscattered neutrals on the phase composition of sputter deposited tungsten thin films

Farzaneh Ahangarani Farahani (UGent) , M. Akagawa, T. Shimizu and Diederik Depla (UGent)

(2026) APPLIED SURFACE SCIENCE. 718.
Add to list
- Journal Article
- A1
- open access
Finite element modelling and experimental validation of two-roller vertical forward flow forming process of EN36B steel

Acar Can Kocabıçak (UGent) , Kyle Nelson, Saeed Althamer, Senai Yalçınkaya, Gregor Kosec, Lihua Wang (UGent) and Magd Abdel Wahab (UGent)

(2026) ADVANCES IN ENGINEERING SOFTWARE. 212.
Add to list
- Journal Article
- A1
Evolution in mechanical and microstructural properties of radioactive liquid organic waste-bearing alkali-activated slag under accelerated carbonation

Emile Mukiza (UGent) , Thi Nhan Nguyen, Lander Frederickx and Quoc Tri Phung

(2026) NUCLEAR ENGINEERING AND DESIGN. 448.
Add to list
- Journal Article
- A1
- open access
Effect of gamma radiation on geopolymerization and microstructure development of metakaolin-based geopolymer for Cesium and Strontium waste immobilization

Emile Mukiza (UGent) , Quoc Tri Phung (UGent) , Suresh Seetharam (UGent) , Lander Frederickx, Ken Verguts, Eef Weetjens, Ziyou Yu, Rodrigo de Oliveira-Silva, Dimitrios Sakellariou and Geert De Schutter (UGent)

(2026) JOURNAL OF NUCLEAR MATERIALS. 620.
Add to list
- Journal Article
- A2
- open access
Recalcification of carbonated cement paste

Xuan Thinh Nguyen (UGent) , Quoc Tri Phung (UGent) , Norbert Maes, Lander Frederickx, Rodrigo de Oliveira Silva, Dimitrios Sakellariou, Geert De Schutter (UGent) and Ozlem Cizer

(2026) CEMENT. 23.
Add to list
- Journal Article
- A1
- open access
Influence of initiator dosage and curing temperature on in-situ polymerization kinetics and synergistic performance of cement composites

Jiangfeng Long (UGent) , Zhonghua Li, Lintao Zhang, Junyuan Guo, Dandan Sun, Linglin Xu, Kai Wu and Geert De Schutter (UGent)

(2026) CEMENT & CONCRETE COMPOSITES. 171.
Add to list
- Journal Article
- A1
- open access
Impact of combined enzyme and ultrasound treatments on protein extraction from potato trimmings and soybean okara

Ben Van den Wouwer (UGent) , Joana Oliveira, Kristof Brijs and Katleen Raes (UGent)

(2025) FOOD BIOSCIENCE. 63.
Add to list
- Journal Article
- A1
- open access
The influence of subcritical annealing and cold working on the hydrogen embrittlement susceptibility of X65 D pipeline steel

Joshua Hoschke, Md Fahdul Wahab Chowdhury, Maximilian Roethig, Clotario V. Tapia‐Bastidas, Jeffrey Venezuela, Yilei Shu, Evan Gray, Milos B. Djukic, Tom Depover (UGent) , Kim Verbeken (UGent) , et al.

(2025) MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION. 76(10). p.1478-1496
Add to list
- Journal Article
- A1
- open access
Crystallization of wax esters in oleogels : relevance of chain length and ester bond position

Henriette Brykczynski, Thalea Schmidt, Ivana Penagos Dordevic (UGent) , Kato Rondou (UGent) , Filip Van Bockstaele (UGent) and Eckhard Flöter

(2025) FOOD STRUCTURE-NETHERLANDS. 44.
Add to list
- Journal Article
- A1
- open access
The effect of particles on static crystallisation in suspensions : sucrose vs inulin

Fien De Witte (UGent) , Ivana Penagos Dordevic (UGent) , Davy Van de Walle (UGent) , Andre Skirtach (UGent) , Filip Van Bockstaele (UGent) and Koen Dewettinck (UGent)

(2025) NPJ SCIENCE OF FOOD. 9(1).
Add to list
- Journal Article
- A2
- open access
Synergistic effects of microwave curing regimes on early, mid, and long-term strengths and microstructural performance of fly ash-slag based 3D-printed geopolymers

Muhammad Kashif Anwar, Xingyi Zhu, Yating Zhang, Jiakang Wang, Yumiao Wu (UGent) and Francisco A. Gilabert (UGent)

(2025) CLEANER MATERIALS. 18.
Add to list
- Journal Article
- A1
- open access
Optimization of permeability resistance and micro-mechanism analysis of backfilling grouting materials for shield tunnel based on factorial design

Chenhui Liu (UGent) , Weitong Li, Adam Bezuijen (UGent) , Lei Yang, Guoxiong Mei and Paulo Cachim

(2025) JOURNAL OF SUSTAINABLE CEMENT-BASED MATERIALS. 14(4). p.799-815
Add to list
- Journal Article
- A1
- open access
Prediction of different recrystallisation textures under a single unified physics-based model description

Konstantina Traka, Estefania Andrea Sepúlveda Hernández (UGent) , Tuan Nguyen Minh (UGent) , Karo Sedighiani, Jilt Sietsma and Leo Kestens (UGent)

(2025) COMPUTATIONAL MATERIALS SCIENCE. 246.
Add to list
- Journal Article
- A1
- open access
Impact of mixed-in polyacrylic- and phosphonate-based additives on lime mortar microstructure

Dulce Elizabeth Valdez Madrid (UGent) , Encarnación Ruiz-Agudo, Sarah Bonilla-Correa, Nele De Belie (UGent) and Veerle Cnudde (UGent)

(2025) MATERIALS. 18(14).
Add to list
- Journal Article
- A1
- open access
Evolution of mechanical and physical properties of a lining concrete exposed to high temperatures and different relative humidities

Shamseldin Abdo (UGent) , Quoc Tri Phung (UGent) , Robby Caspeele (UGent) , S. C. Seetharam and Roman Wan-Wendner (UGent)

(2025) CONSTRUCTION AND BUILDING MATERIALS. 476.
Add to list
- Journal Article
- A1
Development of irradiation- and high-temperature resistant steels for fusion applications : Belgian contribution

Dmitry Terentyev (UGent) , O. Kachko, A. Puype, Sahil Valiyev (UGent) , K. Iroc and A. Zinovev

(2025) JOURNAL OF NUCLEAR MATERIALS. 606.
Add to list
- Journal Article
- A1
- open access
A (p)review : adhesion of printcrete for tunnel structures

Yaxin Tao (UGent) , Li Wang, Timothy Wangler, Karel Lesage (UGent) , Geert De Schutter (UGent) , Kim Van Tittelboom (UGent) and Yong Yuan

(2025) CASE STUDIES IN CONSTRUCTION MATERIALS. 22.
Add to list
- Journal Article
- A1
- open access
New insights of ordered packing bricks-like structure in 3-amino-propyltriethoxysilane modified calcium silicate hydrate systems

Zheyu Zhu, Kai Wu, Zhongping Wang, Linglin Xu, Yue Zhou and Geert De Schutter (UGent)

(2025) JOURNAL OF BUILDING ENGINEERING. 106.
Add to list
- Journal Article
- A1
- open access
A new model for investigating the formation of interfacial transition zone in cement-based materials

Xuan Gao (UGent) , Qing-feng Liu, Yuxin Cai, Liang-yu Tong, Zesen Peng, Qing Xiang Xiong and Geert De Schutter (UGent)

(2025) CEMENT AND CONCRETE RESEARCH. 187.
Add to list
- Journal Article
- A1
- open access
Li+ concentration and morphological changes at the anode and cathode interphases inside solid-state lithium metal batteries

Chun Huang, Matthew D Wilson, Ben Cline, Abeiram Sivarajah, Wiebe Stolp (UGent) , Matthieu Boone (UGent) , Thomas Connolley and Chu Lun Alex Leung

(2025) JOURNAL OF PHYSICS-ENERGY. 7(2).
Add to list
- Journal Article
- A1
- open access
Active SAP desorption control in concrete through acoustic emission for optimized curing

Eleni Korda (UGent) , Annelise Cousture, Eleni Tsangouri, Didier Snoeck (UGent) , Geert De Schutter (UGent) and Dimitrios G. Aggelis

(2025) CEMENT & CONCRETE COMPOSITES. 160.
Add to list
- Journal Article
- A1
- open access
Performance evaluation of mixing carbonated reactive magnesia slurry in Portland cement pastes

Shuang Luo (UGent) , Minlu Wang, Ba Tung Pham, Nele De Belie (UGent) and Tung-Chai Ling

(2025) CEMENT & CONCRETE COMPOSITES. 160.
Add to list
- Journal Article
- A1
- open access
Fretting wear mechanism of GH4169 dovetail joint specimens treated with hybrid laser shock peening

Xiuyang Fang, Zheng Wang, Magd Abdel Wahab (UGent) , Jianen Gong, Xiong Liu, Xing Liu and Zhenbing Cai

(2025) TRIBOLOGY INTERNATIONAL. 209.
Add to list
- Journal Article
- A1
- open access
Industrial reactive sputter deposition of TiZrN coatings : the role of nitrogen partial pressure

Sahand Behrangi, Diederik Depla (UGent) , Pavel Souček, Zsolt Czigány, Vilma Buršíková, Katalin Balázsi and Petr Vašina

(2025) SURFACE & COATINGS TECHNOLOGY. 499.
Add to list
- Journal Article
- A1
- open access
Tuning the crystallization temperature of titanium dioxide thin films by incorporating silicon dioxide via supercycle atomic layer deposition

Carina Hedrich, Davy Deduytsche (UGent) , Robin Petit (UGent) , Tobias Krekeler, Jun Peng, Martin Ritter, Jolien Dendooven (UGent) , Christophe Detavernier (UGent) , Robert H. Blick and Robert Zierold

(2025) SURFACES AND INTERFACES. 57.
Add to list
- Conference Paper
- C1
- open access
Exploring lime mortar microstructure : investigating the impact of mixed-in additives and their role in salt efflorescence inhibition

Dulce Elizabeth Valdez Madrid (UGent) , Chandra Winardhi (UGent) , Nele De Belie (UGent) and Veerle Cnudde (UGent)

(2024) MATEC Web of Conferences. 403.
Add to list
- Conference Paper
- C3
Application of Raman spectroscopy for unravelling the fat crystal network of palm oil on the microscale

Fien De Witte (UGent) , Kato Rondou (UGent) , Koen Dewettinck (UGent) , Filip Van Bockstaele (UGent) and Andre Skirtach (UGent)

(2024) 2024 AOCS Annual Meeting & Expo, Abstracts.
Add to list
- Journal Article
- A1
Characterisation of hydride formation in as-built and heat treated laser powder bed fused Ti-6Al-4V

Liesbet Deconinck, Tom Depover (UGent) and Kim Verbeken (UGent)

(2024) JOURNAL OF ALLOYS AND COMPOUNDS. 972.
Add to list
- Journal Article
- A1
- open access
Terahertz time-domain transmission spectroscopy of water and hydrogel thin films : extraction of optical parameters and application to agarose gel characterization

Mark Justine Zapanta, Xuequan Chen, Davy Van de Walle (UGent) , Annelies Postelmans, Koen Dewettinck (UGent) and Wouter Saeys

(2024) SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY. 320.
Add to list
- Journal Article
- A1
- open access
Food-based biomaterials : pH-responsive alginate/gellan gum/ carboxymethyl cellulose hydrogel beads for lactoferrin delivery

Lin Cao (UGent) , Davy Van de Walle (UGent) , Hannah Hirmz (UGent) , Evelien Wynendaele (UGent) , Koen Dewettinck (UGent) , Bogdan Parakhonskiy (UGent) and Andre Skirtach (UGent)

(2024) BIOMATERIALS ADVANCES. 165.
Add to list
- Journal Article
- A1
- open access
In situ estimation of ice crystal properties at the South Pole using LED calibration data from the IceCube Neutrino Observatory

Rasha Abbasi, Markus Ackermann, Jenni Adams, Nakul Aggarwal, Juanan Aguilar, Markus Ahlers, Maryon Ahrens, Jean-Marco Alameddine, Antonio Augusto Alves, Najia Moureen Binte Amin, et al.

(2024) CRYOSPHERE. 18(1). p.75-102
Add to list
- Journal Article
- A1
- open access
Preliminary evaluation of the influence of hydrogen on the fracture toughness of an X65 gas-transmission pipeline steel

Md Fahdul Wahab Chowdhury, Clotario V. Tapia-Bastidas, Joshua Hoschke, Jeffrey Venezuela, Ting Liu, Milos B. Djukic, Tom Depover (UGent) , Kim Verbeken (UGent) , Lenny Mcinnes, Maximilian Roethig, et al.

(2024) ADVANCED ENGINEERING MATERIALS. 26(16).
Add to list
- Conference Paper
- C3
- open access
Structural integrity of the WAAM-substrate interface

Robin Motte (UGent) , Kris Hectors (UGent) , Anil Sudhakar (UGent) and Wim De Waele (UGent)

(2024) 2024 FEA Research Symposium, Abstracts.
Add to list
- Journal Article
- A1
- open access
Insights in the structural hierarchy of statically crystallized palm oil

Fien De Witte (UGent) , Ivana Penagos Dordevic (UGent) , Kato Rondou (UGent) , Kim Moens (UGent) , Benny Lewille (UGent) , Daylan A. Tzompa-Sosa (UGent) , Davy Van de Walle (UGent) , Filip Van Bockstaele (UGent) , Andre Skirtach (UGent) and Koen Dewettinck (UGent)

(2024) CRYSTALS. 14(2).
Add to list
- Journal Article
- A1
- open access
Influencing chocolate gloss inhomogeneities by the choice of surface-active substance and contact material

Sarah Schroeder (UGent) , Anna Naemi Beiner, Ute Bindrich, Koen Dewettinck (UGent) , Knut Franke, Volker Heinz, Davy Van de Walle (UGent) and Dana Middendorf

(2024) FOOD STRUCTURE-NETHERLANDS. 40.
Add to list
- Journal Article
- A1
- open access
From nucleation to fat crystal network : effects of stearic-palmitic sucrose ester on static crystallization of palm oil

Fien De Witte (UGent) , Ivana Penagos Dordevic (UGent) , Davy Van de Walle (UGent) , Andre Skirtach (UGent) , Koen Dewettinck (UGent) and Filip Van Bockstaele (UGent)

(2024) FOODS. 13(9).
Add to list
- Journal Article
- A1
- open access
The effect of ultrasound on the extraction and foaming properties of proteins from potato trimmings

Ben Van den Wouwer (UGent) , Kristof Brijs, Arno G.B. Wouters and Katleen Raes (UGent)

(2024) FOOD CHEMISTRY. 455.
Add to list
- Journal Article
- A1
- open access
Multiscale assessment of the effect of a stearic-palmitic sucrose ester on the crystallization of anhydrous milk fat

Fien De Witte (UGent) , Ivana Penagos Dordevic (UGent) , Kim Moens (UGent) , Andre Skirtach (UGent) , Filip Van Bockstaele (UGent) and Koen Dewettinck (UGent)

(2024) FOOD RESEARCH INTERNATIONAL. 197.
Add to list
- Journal Article
- A1
- open access
Hydric environment and chemical composition shape non-avian reptile eggshell absorption

Gerben Debruyn (UGent) , Jozefien Geltmeyer, Ella Schoolaert (UGent) , Michaël Nicolaï (UGent) , Wanjie Xie (UGent) , Maarten Wynant, Matthew Shawkey (UGent) , Karen De Clerck (UGent) and Liliana D'Alba Altamirano (UGent)

(2024) INTEGRATIVE AND COMPARATIVE BIOLOGY. 64(1). p.107-119
Add to list
- Journal Article
- A1
Monitoring solidification and storage stability of well-tempered chocolates obtained through various pre-crystallization techniques

Nathaniel Hendrik, Ivana Penagos Dordevic (UGent) , Fien De Witte (UGent) , Davy Van de Walle (UGent) , Flavio H. Marchesini (UGent) and Koen Dewettinck (UGent)

(2024) FOOD AND BIOPROCESS TECHNOLOGY. 17(8). p.2181-2205
Add to list
- Journal Article
- A1
- open access
Fatigue crack propagation of AA2024 alloy under texture control using crystal plasticity coupled with accelerated cyclic cohesive zone model

Qi Zhao (UGent) , Magd Abdel Wahab (UGent) , Yong Ling (UGent) , Zhiyi Liu and Dagang Wang

(2024) ENGINEERING FRACTURE MECHANICS. 296.
Add to list
- Journal Article
- A1
- open access
Enhanced fretting fatigue strength of TC11 titanium alloy using laser-assisted ultrasonic surface rolling process

Kaifa Fan (UGent) , Daoxin Liu, Kai Zhou, Yanjie Liu, Hao Zhang, Xiaohua Zhang, Yueyang Li, Mengyao Li, Yuan Li and Magd Abdel Wahab (UGent)

(2024) TRIBOLOGY INTERNATIONAL. 195.
Add to list
- Journal Article
- A1
- open access
Texture formation under control of S phase characteristic and tensile property of hot-rolling 2A12 aluminum alloy improved by brass texture

Qi Zhao (UGent) , Yang Qu, Zhiyi Liu, Hao Ke, Sen Jiang, Xinhong Wang, Chengfu Duan, Zhipeng Zhai and Magd Abdel Wahab (UGent)

(2024) MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 899.
Add to list
- Journal Article
- A1
- open access
A conceptual design of two-stream alkali-activated materials

Yubo Sun, Manu K Mohan (UGent) , Yaxin Tao (UGent) , Yi Zhang (UGent) , Kim Van Tittelboom (UGent) , Guang Ye (UGent) and Geert De Schutter (UGent)

(2024) CEMENT & CONCRETE COMPOSITES. 148.
Add to list
- Journal Article
- A1
- open access
Effects of mixing conditions and activator anionic species on the rheology of silicate-activated slag concrete

Yubo Sun, Manu K Mohan (UGent) , Xiaodi Dai, Yiyuan Zhang (UGent) , Guang Ye (UGent) and Geert De Schutter (UGent)

(2024) CEMENT & CONCRETE COMPOSITES. 150.
Add to list
- Journal Article
- A1
- open access
Influence of PET as single-use contact material on gloss and surface properties of chocolate

Sarah Schroeder (UGent) , Lena Marie Schimke, Ute Bindrich, Koen Dewettinck (UGent) , Knut Franke, Volker Heinz, Davy Van de Walle (UGent) and Dana Middendorf

(2024) FOOD STRUCTURE-NETHERLANDS. 40.
Add to list
- Journal Article
- A1
A signal‐to‐noise‐ratio‐based automated algorithm to accelerate kinetic Monte Carlo convergence in basic polymerizations

Alessandro Trigilio (UGent) , Yoshi Marien (UGent) , Kyann De Smit, Paul Van Steenberge (UGent) and Dagmar D'hooge (UGent)

(2024) ADVANCED THEORY AND SIMULATIONS. 7(2).
Add to list
- Journal Article
- A1
- open access
Development of 3D printable alkali-activated slag-metakaolin concrete

Xiaodi Dai, Yaxin Tao (UGent) , Yi Zhang (UGent) , Luchuan Ding, Kim Van Tittelboom (UGent) and Geert De Schutter (UGent)

(2024) CONSTRUCTION AND BUILDING MATERIALS. 444.
Add to list
- Journal Article
- A1
- open access
Influence of superabsorbent polymers on the chloride ingress of mortar measured by chloride diffusion and a quasi-steady-state migration test

Tim Van Mullem (UGent) , Laurena De Brabandere (UGent) , Emily Van de Voorde, Didier Snoeck and Nele De Belie (UGent)

(2024) CEMENT & CONCRETE COMPOSITES. 150.
Add to list
- Journal Article
- A1
- open access
Prediction of fretting fatigue lifetime of aluminium alloy treated with Friction Stir Processing using continuum damage mechanics

Sutao Han, Nana Yang, Qi Zhao (UGent) , Yunlai Zhou, Lihua Wang (UGent) and Magd Abdel Wahab (UGent)

(2024) TRIBOLOGY INTERNATIONAL. 195.
Add to list
- Journal Article
- A1
- open access
Phase composition of sputter deposited tungsten thin films

Farzaneh Ahangarani Farahani (UGent) and Diederik Depla (UGent)

(2024) SURFACE & COATINGS TECHNOLOGY. 494.
Add to list
- Journal Article
- A1
- open access
Upgrading analytical models to predict the onset of degradation in selective laser sintering

Ruben Vande Ryse, Mariya Edeleva (UGent) , Aico Patoor, Frederik Pille (UGent) , Dagmar D'hooge (UGent) and Ludwig Cardon (UGent)

(2024) VIRTUAL AND PHYSICAL PROTOTYPING. 19(1).
Add to list
- Journal Article
- A1
- open access
Mechanism of recalcification and its effects on the microstructure and transport properties of cement paste

Thinh Nguyen, Quoc Tri Phung, Norbert Maes, Lander Frederickx, Rodrigo de Oliveira-Silva, Dimitrios Sakellariou, Geert De Schutter (UGent) and Ozlem Cizer

(2024) MATERIALS & DESIGN. 244.
Add to list
- Journal Article
- A1
- open access
Tower-based C-band radar measurements of an alpine snowpack

Isis Brangers, Hans-Peter Marshall, Gabrielle De Lannoy, Devon Dunmire, Christian Matzler and Hans Lievens (UGent)

(2024) CRYOSPHERE. 18(7). p.3177-3193
Add to list
- Journal Article
- A1
Local strain heterogeneity and damage mechanisms in zirconia particle-reinforced TRIP steel MMCs : in situ tensile testing with digital image processing

Faisal Qayyum, Chenchun Chiu, Shaochen Tseng, Umid Rustamov, Susanne Berndorf, Fuhui Shen (UGent) , Sergey Guk, ChingKong Chao and Ulrich Prahl

(2024) JOURNAL OF MATERIALS SCIENCE. 59(40). p.18882-18900
Add to list
- Journal Article
- A1
- open access
Hydration and microstructure of calcium sulfoaluminate-Portland cement binder systems for set-on-demand applications

Yaxin Tao (UGent) , Manu K Mohan (UGent) , A. V. Rahul, Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2024) MATERIALS AND STRUCTURES. 57(2).
Add to list
- Journal Article
- A1
- open access
The effects of strain rate and anisotropy on the formability and mechanical behaviour of aluminium alloy 2024-T3

Martin Harant, Patricia Verleysen (UGent) , Milan Forejt and Stepan Kolomy

(2024) METALS. 14(1).
Add to list
- Journal Article
- A1
- open access
A novel set-type yogurt with improved rheological and sensory properties by the sole addition of insoluble soybean fiber

Bifen Chen, Yongjian Cai, Xiujie Zhao, Shuguang Wang, Yongliang Zhuang, Qiangzhong Zhao, Mouming Zhao and Paul Van der Meeren (UGent)

(2024) FOOD BIOSCIENCE. 58.
Add to list
- Journal Article
- A1
- open access
Prediction of residual stress distribution induced by ultrasonic nanocrystalline surface modification using machine learning

Chao Li (UGent) , Auezhan Amanov, Yifei Li, Can Wang (UGent) , Dagang Wang and Magd Abdel Wahab (UGent)

(2024) ADVANCES IN ENGINEERING SOFTWARE. 188.
Add to list
- Journal Article
- A1
- open access
Morphological analysis of mechanically recycled blends of high density polyethylene and polypropylene with strong difference in melt flow index

Annabelle Verberckmoes (UGent) , Ellen Fernandez (UGent) , Carla Martins, Pablo Reyes Isaacura (UGent) , Ludwig Cardon (UGent) , Dagmar D'hooge (UGent) and Mariya Edeleva (UGent)

(2024) POLYMER. 300.
Add to list
- Journal Article
- A1
- open access
The effect of hydrogen and notch orientation in SENT specimens on the fracture toughness of an API 5L X70 pipeline steel

Robin Depraetere, Wim De Waele (UGent) , Margo Cauwels (UGent) , Tom Depover (UGent) , Kim Verbeken (UGent) and Stijn Hertelé (UGent)

(2024) ENGINEERING FRACTURE MECHANICS. 300.
Add to list
- Journal Article
- A1
- open access
Weldability of additively manufactured powder bed fusion 316L stainless steel using arc and laser welding

Koen Faes, Rafael Gomes Nunes Silva (UGent) , Florian Probst, Robin Ceuppens and Wim De Waele (UGent)

(2024) CRYSTALS. 14(4).
Add to list
- Journal Article
- A1
Liquid metal embrittlement susceptibility of the transformation-induced plasticity steel/lead–bismuth eutectic system

Cholidah Akbar Fitriani (UGent) , Lisa Claeys (UGent) , Serguei Gavrilov and Kim Verbeken (UGent)

(2024) STEEL RESEARCH INTERNATIONAL. 95(8).
Add to list
- Journal Article
- A1
Semi-crystalline materials for pharmaceutical fused filament fabrication : dissolution and porosity

Silke Henry, Mark Carroll, Keir N. Murphy, Laurens Leys (UGent) , Daniel Markl, Valérie Vanhoorne (UGent) and Chris Vervaet (UGent)

(2024) INTERNATIONAL JOURNAL OF PHARMACEUTICS. 652.
Add to list
- Book Editor
- open access
Proceedings of the DuRSAAM 2023 Symposium on Advancing Alkali-Activated Materials

Stijn Matthys (UGent) and Alessandro Proia (UGent)

(2023)
Add to list
- PhD Thesis
Microstructural alterations associated with white etching cracks in bearing steel

Ksenija Nikolić

(2023)
Add to list
- Journal Article
- A1
Rheological and mechanical properties of 3D printable alkali-activated slag mixtures with addition of nano clay

Xiaodi Dai, Yaxin Tao (UGent) , Kim Van Tittelboom (UGent) and Geert De Schutter (UGent)

(2023) CEMENT & CONCRETE COMPOSITES. 139.
Add to list
- Journal Article
- A1
In-situ hydrogen embrittlement evaluation of as-built and heat treated laser powder bed fused Ti-6Al-4V versus conventionally cold rolled Ti-6Al-4V

Liesbet Deconinck, María T. Villa Vidaller, Elena Bernardo Quejido, Eric A. Jägle, Tom Depover (UGent) and Kim Verbeken (UGent)

(2023) ADDITIVE MANUFACTURING. 76.
Add to list
- Journal Article
- A1
Assessment of pore structure characteristics and tortuosity of 3D printed concrete using mercury intrusion porosimetry and X-ray tomography

Manu K Mohan (UGent) , A. V. Rahul, Jeroen Van Stappen, Veerle Cnudde (UGent) , Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2023) CEMENT & CONCRETE COMPOSITES. 140.
Add to list
- Journal Article
- A1
- open access
Influence of grit particles characteristics on the abrasive wear micro-mechanisms of NbC-Ni and WC-Co hard materials

Naveenkumar Rajendhran, Kannaki Shanmugham Pondicherry (UGent) , Shuigen Huang, Jozef Vleugels, Jacob Sukumaran and Patrick De Baets (UGent)

(2023) INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS. 118.
Add to list
- Journal Article
- A1
- open access
Fresh and hardened state properties, reaction kinetics and microstructure of sodium sulfate/sodium hydroxide : activated slag mixtures

Xiaodi Dai, Serdar Aydin (UGent) , Mert Yücel Yardimci (UGent) and Geert De Schutter (UGent)

(2023) CONSTRUCTION AND BUILDING MATERIALS. 401.
Add to list
- Journal Article
- A1
- open access
Effect of copper and stainless steel slags on fresh, mechanical and pore structure properties of alkali activated ground granulated blast furnace slag

Saeid Ghorbani (UGent) , Yubo Sun, Manu K Mohan (UGent) and Stijn Matthys (UGent)

(2023) CASE STUDIES IN CONSTRUCTION MATERIALS. 18.
Add to list
- Journal Article
- A1
Effect of neutron irradiation on tensile properties of advanced Cu-based alloys and composites developed for fusion applications

Dmitry Terentyev, Michael Rieth, Gerald Pintsuk, Alexander Von Mueller, Steffen Antusch, Aleksandr Zinovev, Alexander Bakaev, Kateryna Poleshchuk (UGent) and Giacomo Aiello

(2023) JOURNAL OF NUCLEAR MATERIALS. 584.
Add to list
- Journal Article
- A1
Physicochemical determinants and mechanisms of the hard-to-cook problem of Senegalia seeds, overlooked wild legumes in the arid tropics

Moustapha Drabo (UGent) , Habtu Shumoy Abraha (UGent) , Aly Savadogo and Katleen Raes (UGent)

(2023) INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY. 58(4). p.1891-1901
Add to list
- Journal Article
- A1
- open access
Effect of surface modification technology on mechanical properties and dry fretting wear behavior of Inconel 718 alloy fabricated by laser powder-based direct energy deposition

Auezhan Amanov, Ruslan Karimbaev, Chao Li (UGent) and Magd Abdel Wahab (UGent)

(2023) SURFACE & COATINGS TECHNOLOGY. 454.
Add to list
- Journal Article
- A1
- open access
Analysis of stress in sputter-deposited films using a kinetic model for Cu, Ni, Co, Cr, Mo, W

Tong Su, Zhaoxia Rao, Sarah Berman, Diederik Depla (UGent) and Eric Chason

(2023) APPLIED SURFACE SCIENCE. 613.
Add to list
- Journal Article
- A1
- open access
Impact of sodium orthophosphate, sodium pyrophosphate or sodium citrate addition via dry-salting on the properties of low-moisture part skim mozzarella

Chak Ming To (UGent) , Chinwe Ogochukwu Nnadi, Teng Wang, Pieter Vermeir (UGent) , Bruno De Meulenaer (UGent) , Koen Dewettinck (UGent) and Paul Van der Meeren (UGent)

(2023) INTERNATIONAL DAIRY JOURNAL. 137.
Add to list
- Journal Article
- A1
- open access
Phase-field simulation of martensitic transformation with different conditions in inhomogeneous polycrystals

Hao Xiang, Wim Van Paepegem (UGent) and Leo Kestens (UGent)

(2023) COMPUTATIONAL MATERIALS SCIENCE. 220.
Add to list
- Journal Article
- A1
- open access
A review on the weldability of additively manufactured aluminium parts by fusion and solid-state welding processes

Rafael Gomes Nunes Silva (UGent) , Koen Faes, Wim De Waele (UGent) , Aude Simar, Wim Verlinde, Matthieu Lezaack, Wout Sneyers and Julius Arnhold

(2023) METALS. 13(10). p.1724-1760
Add to list
- Journal Article
- A1
Temperature-dependent deformation and fracture properties of low-carbon martensitic steel in different stress states

Zhen Zhang, Fuhui Shen (UGent) , Hanqing Liu, Markus Koenemann and Sebastian Munstermann

(2023) JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T. 25. p.1931-1943
Add to list
- Journal Article
- A1
- open access
New findings on the contribution of Mg-Al-NO3 layered double hydroxides to the hydration and chloride binding capacity of cement pastes

Mohammadali Yazdi, Elke Gruyaert (UGent) , Kim Van Tittelboom (UGent) and Nele De Belie (UGent)

(2023) CEMENT AND CONCRETE RESEARCH. 163.
Add to list
- Journal Article
- A1
Incorporation of modified okara-derived insoluble soybean fiber into set-type yogurt : structural architecture, rheological properties and moisture stability

Bifen Chen, Xiujie Zhao, Yongjian Cai, Xuelian Jing, Mouming Zhao, Qiangzhong Zhao and Paul Van der Meeren (UGent)

(2023) FOOD HYDROCOLLOIDS. 137.
Add to list
- Journal Article
- A1
- open access
Interpretation of the early stiffening process in alkali-activated slag pastes

Yubo Sun, Luiz Miranda de Lima, Laura Rossi, Dengwu Jiao, Zhenming Li, Guang Ye (UGent) and Geert De Schutter (UGent)

(2023) CEMENT AND CONCRETE RESEARCH. 167.
Add to list
- Journal Article
- A1
- open access
A combined numerical‐experimental approach for the critical hydrogen diffusion depth in steel

Simon Vander Vennet, Kim Verbeken (UGent) and Tom Depover (UGent)

(2023) STEEL RESEARCH INTERNATIONAL. 94(7).
Add to list
- Journal Article
- A1
- open access
Accelerating the reaction process of sodium carbonate-activated slag mixtures with the incorporation of a small addition of sodium hydroxide/sodium silicate

Xiaodi Dai, Qiang Ren, Serdar Aydin (UGent) , Mert Yücel Yardimci (UGent) and Geert De Schutter (UGent)

(2023) CEMENT & CONCRETE COMPOSITES. 141.
Add to list
- Journal Article
- A2
Effect of freeze–thaw cycles on consolidation behavior of two plastic fine soils

Mahmoud Ghazavi, Mahya Roustaei Hossein Abadi (UGent) , Vahid Safaei and Amir Kalhor

(2023) GEOTECHNICAL AND GEOLOGICAL ENGINEERING. 41(2). p.1473-1483
Add to list
- Journal Article
- A1
Set-on-demand of alkali-activated slag mixture using twin-pipe pumping

Yaxin Tao (UGent) , Xiaodi Dai, Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2023) CONSTRUCTION AND BUILDING MATERIALS. 392.
Add to list
- Journal Article
- A1
- open access
Competitive effect of residual stress and surface roughness on the fatigue life of shot peened S42200 steel at room and elevated temperature

Kaifa Fan (UGent) , Daoxin Liu, Yanjie Liu, Junnan Wu, Hailan Shi, Xiaohua Zhang, Kai Zhou, Junfeng Xiang and Magd Abdel Wahab (UGent)

(2023) TRIBOLOGY INTERNATIONAL. 183.

Effect of cement content on the pore structure and imbibition rate of lime-cement mortars

Coupled matrix-based Monte Carlo simulations for detailed polymer microstructure characterization and material property estimation

From bicarbonate supersaturation to sweet corrosion : a multiscale study of FeCO3 film development on pipeline steels

Mechanical properties and microstructure of loess stabilized with nano-silica and lime kiln dust

Exploring the potential of citrus pectin as stabilizers for fat-free set yogurt : accelerating fermentation, reducing syneresis, and improving texture

Effect of thermal neutron shielding on the irradiation hardening and recrystallization of tungsten

Combined laser shock peening and shot peening for improving fretting wear and low-cycle fatigue performance of Ti-6Al-4V

Synergistic use of water treatment sludge and silica fume in geopolymer binders for stabilization/solidification of heavy metals in construction waste

Arc-based directed energy deposition (DED-Arc) of 7xxx Series Al–Zn–Mg–Cu alloys : a review

Influence of hydrogen and orientation on the fracture toughness and strength of X70 pipeline steel

The benefits of insoluble soybean fibre on the properties of acid-induced skimmed milk gels : mechanistic insights from the acidification process

Sustainable strength development of construction and demolition waste using water treatment sludge, silica fume, and jute fiber for geopolymer-based pavement subgrades

The role of backscattered neutrals on the phase composition of sputter deposited tungsten thin films

Finite element modelling and experimental validation of two-roller vertical forward flow forming process of EN36B steel

Evolution in mechanical and microstructural properties of radioactive liquid organic waste-bearing alkali-activated slag under accelerated carbonation

Effect of gamma radiation on geopolymerization and microstructure development of metakaolin-based geopolymer for Cesium and Strontium waste immobilization

Recalcification of carbonated cement paste

Influence of initiator dosage and curing temperature on in-situ polymerization kinetics and synergistic performance of cement composites

Impact of combined enzyme and ultrasound treatments on protein extraction from potato trimmings and soybean okara

The influence of subcritical annealing and cold working on the hydrogen embrittlement susceptibility of X65 D pipeline steel

Crystallization of wax esters in oleogels : relevance of chain length and ester bond position

The effect of particles on static crystallisation in suspensions : sucrose vs inulin

Synergistic effects of microwave curing regimes on early, mid, and long-term strengths and microstructural performance of fly ash-slag based 3D-printed geopolymers

Optimization of permeability resistance and micro-mechanism analysis of backfilling grouting materials for shield tunnel based on factorial design

Prediction of different recrystallisation textures under a single unified physics-based model description

Impact of mixed-in polyacrylic- and phosphonate-based additives on lime mortar microstructure

Evolution of mechanical and physical properties of a lining concrete exposed to high temperatures and different relative humidities

Development of irradiation- and high-temperature resistant steels for fusion applications : Belgian contribution

A (p)review : adhesion of printcrete for tunnel structures

New insights of ordered packing bricks-like structure in 3-amino-propyltriethoxysilane modified calcium silicate hydrate systems

A new model for investigating the formation of interfacial transition zone in cement-based materials

Li+ concentration and morphological changes at the anode and cathode interphases inside solid-state lithium metal batteries

Active SAP desorption control in concrete through acoustic emission for optimized curing

Performance evaluation of mixing carbonated reactive magnesia slurry in Portland cement pastes

Fretting wear mechanism of GH4169 dovetail joint specimens treated with hybrid laser shock peening

Industrial reactive sputter deposition of TiZrN coatings : the role of nitrogen partial pressure

Tuning the crystallization temperature of titanium dioxide thin films by incorporating silicon dioxide via supercycle atomic layer deposition

Exploring lime mortar microstructure : investigating the impact of mixed-in additives and their role in salt efflorescence inhibition

Application of Raman spectroscopy for unravelling the fat crystal network of palm oil on the microscale

Characterisation of hydride formation in as-built and heat treated laser powder bed fused Ti-6Al-4V

Terahertz time-domain transmission spectroscopy of water and hydrogel thin films : extraction of optical parameters and application to agarose gel characterization

Food-based biomaterials : pH-responsive alginate/gellan gum/ carboxymethyl cellulose hydrogel beads for lactoferrin delivery

In situ estimation of ice crystal properties at the South Pole using LED calibration data from the IceCube Neutrino Observatory

Preliminary evaluation of the influence of hydrogen on the fracture toughness of an X65 gas-transmission pipeline steel

Structural integrity of the WAAM-substrate interface

Insights in the structural hierarchy of statically crystallized palm oil

Influencing chocolate gloss inhomogeneities by the choice of surface-active substance and contact material

From nucleation to fat crystal network : effects of stearic-palmitic sucrose ester on static crystallization of palm oil

The effect of ultrasound on the extraction and foaming properties of proteins from potato trimmings

Multiscale assessment of the effect of a stearic-palmitic sucrose ester on the crystallization of anhydrous milk fat

Hydric environment and chemical composition shape non-avian reptile eggshell absorption

Monitoring solidification and storage stability of well-tempered chocolates obtained through various pre-crystallization techniques

Fatigue crack propagation of AA2024 alloy under texture control using crystal plasticity coupled with accelerated cyclic cohesive zone model

Enhanced fretting fatigue strength of TC11 titanium alloy using laser-assisted ultrasonic surface rolling process

Texture formation under control of S phase characteristic and tensile property of hot-rolling 2A12 aluminum alloy improved by brass texture

A conceptual design of two-stream alkali-activated materials

Effects of mixing conditions and activator anionic species on the rheology of silicate-activated slag concrete

Influence of PET as single-use contact material on gloss and surface properties of chocolate

A signal‐to‐noise‐ratio‐based automated algorithm to accelerate kinetic Monte Carlo convergence in basic polymerizations

Development of 3D printable alkali-activated slag-metakaolin concrete

Influence of superabsorbent polymers on the chloride ingress of mortar measured by chloride diffusion and a quasi-steady-state migration test

Prediction of fretting fatigue lifetime of aluminium alloy treated with Friction Stir Processing using continuum damage mechanics

Phase composition of sputter deposited tungsten thin films

Upgrading analytical models to predict the onset of degradation in selective laser sintering

Mechanism of recalcification and its effects on the microstructure and transport properties of cement paste

Tower-based C-band radar measurements of an alpine snowpack

Local strain heterogeneity and damage mechanisms in zirconia particle-reinforced TRIP steel MMCs : in situ tensile testing with digital image processing

Hydration and microstructure of calcium sulfoaluminate-Portland cement binder systems for set-on-demand applications

The effects of strain rate and anisotropy on the formability and mechanical behaviour of aluminium alloy 2024-T3

A novel set-type yogurt with improved rheological and sensory properties by the sole addition of insoluble soybean fiber

Prediction of residual stress distribution induced by ultrasonic nanocrystalline surface modification using machine learning

Morphological analysis of mechanically recycled blends of high density polyethylene and polypropylene with strong difference in melt flow index

The effect of hydrogen and notch orientation in SENT specimens on the fracture toughness of an API 5L X70 pipeline steel

Weldability of additively manufactured powder bed fusion 316L stainless steel using arc and laser welding

Liquid metal embrittlement susceptibility of the transformation-induced plasticity steel/lead–bismuth eutectic system

Semi-crystalline materials for pharmaceutical fused filament fabrication : dissolution and porosity

Proceedings of the DuRSAAM 2023 Symposium on Advancing Alkali-Activated Materials

Microstructural alterations associated with white etching cracks in bearing steel

Rheological and mechanical properties of 3D printable alkali-activated slag mixtures with addition of nano clay

In-situ hydrogen embrittlement evaluation of as-built and heat treated laser powder bed fused Ti-6Al-4V versus conventionally cold rolled Ti-6Al-4V