Show
Sort by
-
Machine Learning for Fuel Property Predictions: A Multi-Task and Transfer Learning Approach
(2023) In SAE Technical Paper -
- Journal Article
- A1
- open access
Performance and emissions of a high-speed marine dual-fuel engine operating with methanol-water blends as a fuel
-
Evaluation and extension of ignition delay correlations for dual-fuel operation with hydrogen or methanol in a medium speed single cylinder engine
-
Development of a Novel Drop-in Naphthenic Spark Ignition Biofuel by Means of a Fuel Blend Calculator and a Simplified Octane Number Verification Method
(2023) -
- Conference Paper
- open access
THIESEL 2022. Conference on Thermo-and Fluid Dynamics of Clean Propulsion Powerplants
(2022) p.1-13 -
- Conference Paper
- C3
- open access
A new biofuel from wood waste for sustainable transportation
-
- Conference Paper
- C1
- open access
Investigation of naphtha-type biofuel from a novel refinery process
-
- Conference Paper
- open access
The FASTWATER demonstrator: retrofitting a pilot boat to methanol operation
(2022) -
- Conference Paper
- C3
- open access
Electrofuels for internal combustion engines
-
Experimental investigation of a methanol fueled SI engine at full load using a central composite design
-
- Conference Paper
- C1
- open access
Integration and validation of a quasi-dimensional modelling methodology and application to light-duty and heavy-duty methanol-fueled spark-ignited engines
-
- Conference Paper
- C1
- open access
Low load ignitability of methanol in a heavy-duty compression ignition engine
-
- Conference Paper
- C1
- open access
Conceptual model for the start of combustion timing in the range from RCCI to conventional dual fuel
-
- Conference Paper
- C1
- open access
An experimental investigation of directly injected E85 fuel in a heavy-duty compression ignition engine
-
Investigation of evaporating sprays in a medium speed marine engine
-
- Journal Article
- A1
- open access
Impact of mileage on particle number emission factors for EURO5 and EURO6 diesel passenger cars
-
Modeling of a methanol fueled direct-injection spark-ignition engine with reformed-exhaust gas recirculation
-
Improving the calculation of evaporating sprays for medium-speed marine-engine-like conditions
-
Optimization and evaluation of a low temperature waste heat recovery system for a heavy duty engine over a transient cycle
-
Cold flow simulation of a dual-fuel engine for diesel-natural gas and diesel-methanol fuelling conditions
-
- Journal Article
- A2
- open access
An optical investigation of dual fuel and RCCI pilot ignition in a medium speed engine
-
- Conference Paper
- C1
- open access
Insights for post-Euro 6 based on analysis of Euro 6d-TEMP PEMS data
-
- Journal Article
- A2
- open access
Retrofitting a high-speed marine engine to dual-fuel methanol-diesel operation : a comparison of multiple and single point methanol port injection
-
- Conference Paper
- C1
- open access
Evaluation of breakup models for marine diesel spray simulations
-
- Journal Article
- A1
- open access
Effects of molar expansion ratio of fuels on engine efficiency
-
- Journal Article
- A1
- open access
Alcohol fuels for spark-ignition engines : performance, efficiency, and emission effects at mid to high blend rates for ternary mixtures
-
- Journal Article
- A1
- open access
A novel technique for detailed and time-efficient combustion modeling of fumigated dual-fuel internal combustion engines
-
On the effects of increased coolant temperatures of light duty engines on waste heat recovery
-
- Conference Paper
- C3
- open access
”Dangerous fuels” for cars : a way to save the world
-
Combustion characterization of methanol in a lean burn Direct Injection Spark Ignition (DISI) engine
-
A coupled tabulated kinetics and flame propagation model for the simulation of fumigated medium speed dual-fuel engines
-
Feasibility study of a new test procedure to identify high emitters of particulate matter during periodic technical inspection
-
- Journal Article
- A1
- open access
Exploring the potential of reformed-exhaust gas recirculation (R-EGR) for increased efficiency of methanol fueled SI engines
-
- Journal Article
- A1
- open access
Methanol as a fuel for internal combustion engines
-
Efficiency and emissions of a high-speed marine diesel engine converted to dual-fuel operation with methanol
-
Influence of injection strategies on engine efficiency for a methanol PPC engine
-
A quasi-dimensional combustion model for spark ignition engines fueled with gasoline–methanol blends
-
- Journal Article
- A1
- open access
Increasing exhaust temperature to enable after-treatment operation on a two-stage turbo-charged medium speed marine diesel engine
-
Alcohol fuels for spark-ignition engines : performance, efficiency and emission effects at mid to high blend rates for binary mixtures and pure components
-
Downsizing potential of methanol fueled DISI engine with variable valve timing and boost control
-
Experimental investigation of emulsified fuels produced with a micro-channel emulsifier : puffing and micro-explosion analyses
-
A heat transfer model for low temperature combustion engines
-
- Journal Article
- A1
- open access
Evaluation of wall heat flux calculation methods for CFD simulations of an internal combustion engine under both motored and HCCI operation
-
- Conference Paper
- C3
- open access
Future marine propulsion : why not add a fuel?
-
- Conference Paper
- C1
- open access
Strategies for introducing methanol as an alternative fuel for shipping
-
Development of laminar burning velocity correlation for the simulation of methanol fueled SI engines operated with onboard fuel reformer
-
Evaluation of empirical heat transfer models using TFG heat flux sensors
-
Experimental investigation and modelling of the in-cylinder heat transfer during ringing combustion in an HCCI engine
-
The chemical route to a carbon dioxide neutral world
-
Evaluation of wall heat flux models for full cycle CFD simulation of internal combustion engines under motoring operation
(2017) -
- Conference Paper
- P1
- open access
Experimental investigation on puffing and micro-explosion occurrence of water in rapeseed oil emulsions droplets : effect of the surfactant concentration
-
- Conference Paper
- C1
- open access
An experimental comparison between two methods for biofuels emulsification
-
- Journal Article
- A1
- open access
Effect of emulsified fuels based on fatty acid distillates on single cylinder diesel engine performance and exhaust emissions
-
- Conference Paper
- C1
- open access
Local heat flux measurement technique for internal combustion engines
(2017) -
Evaluation of empirical heat transfer models for HCCI combustion in a CFR engine
-
Studying the effect of the flame passage on the convective heat transfer in a S.I. engine
-
Assessment of diesel engine performance when fueled with biodiesel from algae and microalgae : an overview
-
Computational study of the laminar reaction front properties of diluted methanol–air flames enriched by the fuel reforming product
-
Emulsified fuels based on fatty acid distillates and rapeseed oil : a physicochemical characterization
-
Modelling the heat transfer of HCCI engines
-
- Conference Paper
- C3
- open access
Laminar Burning Velocity of Methanol Steam Reforming Products: Influence of CO Selectivity
-
Demonstrating the use of thin film gauges for heat flux measurements in ICEs: measurements on an inlet valve in motored operation
-
- Conference Paper
- C1
- open access
Using alcohol fuels in dual fuel operation of compression ignition engines: a review
-
Heat flux measurements using thin film gauges in a production engine
-
- Journal Article
- A1
- open access
Experimental investigation of the effect of engine settings on the wall heat flux during HCCI combustion
-
- Journal Article
- A1
- open access
Heat transfer in premixed spark ignition engines part I : identification of the factors influencing heat transfer
-
The effect of ringing combustion on the wall heat flux during HCCI operation
-
Heat transfer in premixed spark ignition engines part II : systematic analysis of the heat transfer phenomena
-
- Conference Paper
- C1
- open access
The temperature dependence of Laminar burning velocities of methanol-syngas-air flames
-
- Journal Article
- A1
- open access
A quasi-dimensional model for SI engines fueled with gasoline–alcohol blends: knock modeling
-
Assessment of empirical heat transfer models for a CFR engine operated in HCCI mode
-
Experimental investigation of a DISI production engine fuelled with methanol, ethanol, butanol and iso-stoichiometric alcohol blends
-
The behavior of a simplified spray model for different diesel and Bio-Diesel surrogates
-
Performance of methanol kinetic mechanisms at oxy-fuel conditions
-
Emulsification of animal fats and vegetable oils for their use as a diesel engine fuel: an overview
-
- Conference Paper
- P1
- open access
Emulsifaction of waste cooking oils and fatty acid distillates as diesel engine fuel
-
Calibration of a TFG sensor for heat flux measurements in a S.I. engine
-
Parametric investigation of GWP potential of ultralight aircraft
-
Conversion of by-products from the vegetable oil industry into biodiesel and its use in internal combustion engines: a review
-
- Journal Article
- A1
- open access
Experimental study of NOx reduction on a medium speed heavy duty diesel engine by the application of EGR (exhaust gas recirculation) and Miller timing
-
- Journal Article
- A1
- open access
Development and validation of a quasi-dimensional model for methanol and ethanol fueled SI engines
-
- Journal Article
- A1
- open access
Recent progress in the use of hydrogen as a fuel for internal combustion engines
-
A two control volume model for the thermal lag engine
-
- Conference Paper
- C1
- open access
Modeling the combustion of (m)ethanol in spark-ignition engines
-
- Conference Paper
- C1
- open access
Sensitivity analysis of a quasi-dimensional model for SI engines fuelled with gasoline-alcohol blends
-
- Conference Paper
- C1
- open access
Influence of water content in ethanol-water blends on the performance and emissions of an SI engine
-
- Journal Article
- A1
- open access
Analysis of vehicle emission measurements on the new WLTC, the NEDC and the CADC
-
- Journal Article
- A1
- open access
The turbulent burning velocity of methanol-air mixtures
-
Hydrogen-fueled internal combustion engines
-
- Conference Paper
- C3
- open access
Modeling of a heavy duty diesel engine to ease complex optimization decisions
-
- Conference Paper
- C3
- open access
Heat transfer in homogeneous charge compression ignition engines
-
- Conference Paper
- C3
- open access
Heat transfer modelling in spark ignition engines: optimization and instrumentation of a TFG sensor
-
- Journal Article
- A1
- open access
Performance and emissions of iso-stoichiometric ternary GEM blends on a production SI engine
-
Future vehicles will be driven by electricity, but not as you think
-
Prediction of cetane number and ignition delay of biodiesel using artificial neural networks
-
Laminar burning velocities of primary reference fuels and simple alcohols
-
The potential of methanol as a fuel for flex-fuel and dedicated spark-ignition engines
-
Development and validation of a knock prediction model for methanol-fuelled SI engines
-
Performance and emissions of a SI engine using methanol-water blends
-
The effects of dilution with nitrogen and steam on the laminar burning velocity of methanol at room and elevated temperatures