Show
Sort by
-
- Conference Paper
- P1
- open access
Influence of electrical eigenfrequencies on damped voltage resonance based sensorless control of switched reluctance drives
-
A sensorless PMSM drive based on high-frequency test pulses and a discrete-time current controller with fixed sampling frequency
-
Cross-saturation in Sensorless PMSM Drives
-
Magnetic shielding of buried high-voltage (HV) cables by conductive metal plates
-
Magnetic force and couple densities and magnetoelastic interactions
-
- Conference Paper
- C1
- open access
Frequency domain identification of synchronous machines by multisine excitation
-
Influence of Flux Penetration on Inductance and Rotor Position Estimation Accuracy of Switched Reluctance Machines
-
Influence of Flux Penetration in Resonance-Based Position Estimation of Switched Reluctance Motors
-
- Conference Paper
- C1
- open access
Flying capacitor multilevel converters for AC machines
-
Identification of PM synchronous machines in the frequency domain by broadband excitation
-
Comparison of magnetostriction models for use in calculations of vibrations in magnetic cores
-
Reducing steady-state current distortions in sensorless control strategies by using adaptive test pulses
-
Balancing and harmonic analysis of flying capacitor multilevel converters
-
Comparison of magnetostriction models for use in calculations of vibrations of magnetic cores
-
Hierarchical Surrogate-Based Optimization Strategy for Optimal Design of Switched Reluctance Motors
-
- Conference Paper
- C1
- open access
Circuit method for conductive and ferromagnetic materials
-
Digitally controlled boost PFC converter with improved output voltage controller
-
A space vector strategy for smooth torque control of switched reluctance machines
-
Input-current distortion of CCM boost PFC converters operated in DCM
-
Neural-network-based model for dynamic hysteresis in the magnetostriction of electrical steel under sinusoidal induction
-
Application of a Preisach-type hysteresis model to the magnetic evaluation of material degradation
-
On-line cure monitoring of polyurethane foams by dielectrometric viscosity measurements
-
Numerical analysis of the contribution of magnetic forces and magnetostriction to the vibrations in induction machines
-
- Journal Article
- A1
- open access
A boost PFC converter with programmable harmonic resistance
-
Embedded Runge-Kutta methods for the integration of a current control loop in an SRM dynamic finite element model
-
Evaluation of low cycle fatigue damage accumulation by the online monitoring of magneto-mechanical properties
-
Magnetic shielding of buried high voltage cables by conductive metal plates
-
Radial forces and torque ripples in split-phase induction motors
-
Prediction of Core Losses in Switched Reluctance Motors Using Finite Element Method and Rainflow Algorithm
-
A Motion-State Estimator for PMSMs by Using an Extended Kalman Filter Including Magnetizing-Flux Saturation
-
Modelling Air Gap Flux Harmonic Components to Describe Motion-State Estimators for PMSMs Including Magnetic Saturation and Multiple-Pole Spatial Saliencies
-
On the Influence of Saturation and Mutual Coupling of both Orthogonal Magnetic Axes on a MTPA Controlled Interior PMSM Drive
-
A discrete-time model including cross-saturation for surface permanent-magnet synchronous machines
-
Space mapping method for the design of passive shields
-
- Conference Paper
- C1
- open access
Embedded Runge-Kutta Methods Applied to a Convertor-Coupled Dynamic Finite Element Model of a Switched Reluctance Motor
-
Embedded Runge-Kutta Methods for the Numerical Solution of an Integrated Model Including Converter, Nonlinear Inductance and Current Control Loop
-
Vibrations in electromechanical devices due to magnetic causes
-
Numerical analysis of the contribution of magnetic forces and magnetostriction to the vibrations in induction machines
-
- Conference Paper
- C1
- open access
Direct Torque Control of Permanent Magnet Synchronous Motors – An Overview
-
Damping potential of single-phase bidirectional rectifiers with resistive harmonic behaviour
-
A simulink state-space model of induction machines including magnetizing-flux saturation.
-
A general description of high-frequency position estimators for interior permanent-magnet synchronous motors
-
Modelling air-gap flux harmonic components to describe motion-state estimators for PMSMs including magnetic saturation and multiple-pole spatial saliencies.
-
Measurement techniques for magnetic characterization of Fe-Si alloys.
-
Small-signal z-domain analysis of digitally controlled converters
-
Fast multipole accelerated finite element-boundary element analysis of shielded induction heaters
-
Evaluating material degradation by the inspection of minor loop magnetic behavior using the moving Preisach formalism
-
Magnetostriction Measurements on Electrical Steels by means of Strain Gauges and Numerical Applications
-
Magnetostriction measurements on electrical steels by means of strain gauges
-
A nonlinear discrete-time model for saturated surface permanent-magnet synchronous machines
-
- Conference Paper
- C1
- open access
Reduction of the voltage distortion with a converter employed as shunt harmonic impedance
-
- Conference Paper
- C1
- open access
A boost PFC converter with programmable harmonic resistance
-
Active and passive magnetic shielding for stray field reduction of an induction heater with axial flux
-
Zero-Crossing Distortion in Grid-Coupled AC-DC Converters
-
Adding damping in power distribution systems by means of power electronic converters
-
A Single Switch Buck-Boost Converter with a High Conversion Ratio
-
The location of a resistive shunt harmonic impedance along a distribution feeder and its influence on harmonic propagation
-
Experimental verification of the z-domain model for digitally controlled converters
-
Application of a Preisach-type hysteresis model to the magnetic evaluation of material degradation
-
On-line cure monitoring of one component foams by dielectrometric viscosity measurements
-
Optimizing a transformer driven active magnetic shield in induction heating
-
Analytical formulation for magnetic shields taking into account hyteresis effects in the Rayleigh region
-
Magnetic evaluation of cyclic mechanical loading and fatigue damage progression using the Preisach formalism
-
2D Magnetic Measurements under 1D stress
-
The Effect of the Assembling Stresses on the Parameters of a Low Power Induction Motor
-
Prediction of core losses in switched reluctance motors using finite element method and rainflow algorithm
-
Fast Multipole Accelerated Finite Element - Boundary Element Analysis of Shielded Induction Heaters
-
Optimization of a Si gradient in laminated SiFe alloys
-
A single switch boost converter with a high conversion ratio
-
Reduction of the voltage distortion with a converter employed as shunt harmonic impedance
-
Experimental verification of the z-domain model for digitally controlled converters
-
Application of magnetostriction measurements for the computation of deformation in electrical steel
-
Monitoring the fatigue state of steel by evaluating the quasistatic and dynamic magnetic behavior
-
The relation between the magnetostriction and the hysteresis losses in the non-oriented electrical steels
-
Magnetic evaluation of cyclic mechanical loading and fatigue damage progression using the Preisach formalism
-
Duty-ratio feedforward for digitally controlled boost PFC converters
-
The effect of Si and Al concentration gradients on the mechanical and magnetic properties of electrical steel
-
2D magnetization of grain-oriented 3%-Si steel under uniaxial stress
-
Preisach-based magnetic evaluation of fatigue damage progression
-
Optimization of multilayered nonlinear crystalline alloys for shielding
-
A nonlinear model for synchronous machines to describe high-frequency signal based position estimators
-
Digitally controlled boost power-factor-correction converters operating in both continuous and discontinuous conduction mode
-
Magnetostriction and Magnetic Forces in Electrical Steel: Finite Element Computations and Measurements
-
Sequential Approximate Multi-Objective Optimization of Switched Reluctance Motor Design Using Surrogate Models and Non-Gradient Local Search Algorithm
-
A magnetic technique for the evaluation of mechanical deformation and its application to TRIP-steels
-
Fatigue damage evaluation of ferromagnetic materials using a magnetic hysteresis technique
-
- Journal Article
- A1
- open access
Magnetic field computation for optimized shielding of induction heaters
-
Magnetic forces, magnetostriction and form effect in ferromagnetic material
-
- Conference Paper
- C1
- open access
Digitally controlled boost PFC converters operated in mixed conduction mode
-
- Conference Paper
- C1
- open access
Harmonic Mitigation Potential of Shunt Harmonic Impedances
-
- Conference Paper
- C1
- open access
Fully equipped half bridge building block for fast prototyping of switching power converters
-
- Conference Paper
- C1
- open access
Digital control of boost pfc converters operated in both continuous and discontinuous conduction mode
-
- Conference Paper
- C1
- open access
Small-signal Laplace-domain analysis of uniformly-sampled pulse-width modulators
-
- Conference Paper
- C1
- open access
Small-Signal z-Domain Analysis of Digitally Controlled Converters
-
Structural Design-Optimization of Switched Reluctance Motors Based on Magnetic Forces Using Finite Element Method Coupled with a Genetic Algorithm
-
Passive and active electromagnetic shielding of induction heaters
-
Fully equipped half bridge building block for fast prototyping of switching power converters
-
Digital control of boost PFC converters operating in both continuous and discontinuous conduction mode
-
Small-signal laplace-domain analysis of uniformly-sampled pulse-width modulators
-
Small-signal z-domain analysis of digitally controlled converters