Experimental parameter optimization for adaptive LoRa modulation in body-centric applications
- Author
- Thomas Ameloot (UGent) , Patrick Van Torre (UGent) and Hendrik Rogier (UGent)
- Organization
- Abstract
- The relentless expansion of the Internet of Things is fueled by constant innovations in low-power wide-area network technologies. Industry forerunners such as LoRa, SigFox and NB-IoT continuously seek to achieve larger communication ranges while consuming as little energy as possible. These efforts, in turn, facilitate vast performance increases in a wide range of related application areas, such as body-centric communication. For example, recently, LoRa modules have been integrated onto wearable textile antennas, thereby greatly extending the range of the body-centric networks. However, as the resulting communication links need to accommodate mobile users, many nodes will regularly be communicating using suboptimal LoRa modulation parameters as these users move around. Adaptive LoRa modulation aims to solve this by optimizing these parameters in realtime, based on the location of the user and the actual performance of the wireless link. In this contribution, the optimal settings for one of the key LoRa modulation parameters, the spreading factor, are experimentally determined. More specifically, it is shown that only a very limited number of spreading factor options should be used in an adaptive LoRa modulation scheme. The results also yield insight into more general LoRa communication aspects by analyzing packet reception and channel throughput data gathered in an urban environment.
- Keywords
- Body-centric communication, Outdoor Propagation, LoRa, Substrate Integrated Waveguide, Textile Antenna
Downloads
-
7724 i.pdf
- full text (Accepted manuscript)
- |
- open access
- |
- |
- 580.07 KB
-
(...).pdf
- full text (Published version)
- |
- UGent only
- |
- |
- 582.83 KB
Citation
Please use this url to cite or link to this publication: http://hdl.handle.net/1854/LU-8665853
- MLA
- Ameloot, Thomas, et al. “Experimental Parameter Optimization for Adaptive LoRa Modulation in Body-Centric Applications.” 2020 14th European Conference on Antennas and Propagation (EuCAP), IEEE, 2020, doi:10.23919/EuCAP48036.2020.9135413.
- APA
- Ameloot, T., Van Torre, P., & Rogier, H. (2020). Experimental parameter optimization for adaptive LoRa modulation in body-centric applications. 2020 14th European Conference on Antennas and Propagation (EuCAP). Presented at the 14th European Conference on Antennas and Propagation (EuCAP), Copenhagen, Denmark. https://doi.org/10.23919/EuCAP48036.2020.9135413
- Chicago author-date
- Ameloot, Thomas, Patrick Van Torre, and Hendrik Rogier. 2020. “Experimental Parameter Optimization for Adaptive LoRa Modulation in Body-Centric Applications.” In 2020 14th European Conference on Antennas and Propagation (EuCAP). IEEE. https://doi.org/10.23919/EuCAP48036.2020.9135413.
- Chicago author-date (all authors)
- Ameloot, Thomas, Patrick Van Torre, and Hendrik Rogier. 2020. “Experimental Parameter Optimization for Adaptive LoRa Modulation in Body-Centric Applications.” In 2020 14th European Conference on Antennas and Propagation (EuCAP). IEEE. doi:10.23919/EuCAP48036.2020.9135413.
- Vancouver
- 1.Ameloot T, Van Torre P, Rogier H. Experimental parameter optimization for adaptive LoRa modulation in body-centric applications. In: 2020 14th European Conference on Antennas and Propagation (EuCAP). IEEE; 2020.
- IEEE
- [1]T. Ameloot, P. Van Torre, and H. Rogier, “Experimental parameter optimization for adaptive LoRa modulation in body-centric applications,” in 2020 14th European Conference on Antennas and Propagation (EuCAP), Copenhagen, Denmark, 2020.
@inproceedings{8665853,
abstract = {{The relentless expansion of the Internet of Things is fueled by constant innovations in low-power wide-area network technologies. Industry forerunners such as LoRa, SigFox and NB-IoT continuously seek to achieve larger communication ranges while consuming as little energy as possible. These efforts, in turn, facilitate vast performance increases in a wide range of related application areas, such as body-centric communication. For example, recently, LoRa modules have been integrated onto wearable textile antennas, thereby greatly extending the range of the body-centric networks. However, as the resulting communication links need to accommodate mobile users, many nodes will regularly be communicating using suboptimal LoRa modulation parameters as these users move around. Adaptive LoRa modulation aims to solve this by optimizing these parameters in realtime, based on the location of the user and the actual performance of the wireless link. In this contribution, the optimal settings for one of the key LoRa modulation parameters, the spreading factor, are experimentally determined. More specifically, it is shown that only a very limited number of spreading factor options should be used in an adaptive LoRa modulation scheme. The results also yield insight into more general LoRa communication aspects by analyzing packet reception and channel throughput data gathered in an urban environment.}},
author = {{Ameloot, Thomas and Van Torre, Patrick and Rogier, Hendrik}},
booktitle = {{2020 14th European Conference on Antennas and Propagation (EuCAP)}},
isbn = {{9781728137124}},
issn = {{2164-3342}},
keywords = {{Body-centric communication,Outdoor Propagation,LoRa,Substrate Integrated Waveguide,Textile Antenna}},
language = {{eng}},
location = {{Copenhagen, Denmark}},
pages = {{5}},
publisher = {{IEEE}},
title = {{Experimental parameter optimization for adaptive LoRa modulation in body-centric applications}},
url = {{http://doi.org/10.23919/EuCAP48036.2020.9135413}},
year = {{2020}},
}
- Altmetric
- View in Altmetric
- Web of Science
- Times cited: