Ghent University Academic Bibliography

Advanced

Experimental investigation of the edge distance of adhesive point-fixings in glass

Jonas Dispersyn, Jan Belis UGent, Kenny Martens UGent and Jolien De Jaegher (2015) IABSE REPORTS 104. p.1-8
abstract
Nowadays bolted point-fixings in glass are widely used, which implies that the glass has to be drilled and tempered. Consequently, the glass is significantly weakened exactly at the position where peak stesses occur when forces are applied. In contrast, this disadvantage does not occur when adhesive technologies are used in which the glass is directly bonded at discrete points. In case of bolted point-fixings, it is well-known that the distance between the connection and the glass edge is a major parameter that influences the strength and behaviour of the connection. However, for adhesive point-fixings this influence has not been extensively investigated yet. Consequently, in this paper the results of a thorough experimental study of this influence on a full-scale glass panel supported by adhesive point-fixings is presented and analysed. The experimental results demonstrate that the edge distance has a significant influence on the stress distribution and deflection of the glass panel: stresses and deformations are reduced with increasing edge distance.
Please use this url to cite or link to this publication:
author
organization
year
type
conference
publication status
published
subject
keyword
Structural glass, Structural analysis, Adhesive, Edge distance, Point-fixing
in
IABSE REPORTS 104
editor
Yozo Fujino
pages
1 - 8
publisher
IABSE
place of publication
Zurich
conference name
IABSE CONFERENCE NARA 2015 : Elegance in Structures
conference location
Nara, Japan
conference start
2015-05-13
conference end
2015-05-15
ISBN
9783857481383
language
English
UGent publication?
yes
classification
C1
copyright statement
I have transferred the copyright for this publication to the publisher
id
5961212
handle
http://hdl.handle.net/1854/LU-5961212
date created
2015-05-20 10:27:11
date last changed
2017-01-02 09:53:26
@inproceedings{5961212,
  abstract     = {Nowadays bolted point-fixings in glass are widely used, which implies that the glass has to be drilled and tempered. Consequently, the glass is significantly weakened exactly at the position where peak stesses occur when forces are applied. In contrast, this disadvantage does not occur when adhesive technologies are used in which the glass is directly bonded at discrete points.
In case of bolted point-fixings, it is well-known that the distance between the connection and the glass edge is a major parameter that influences the strength and behaviour of the connection. However, for adhesive point-fixings this influence has not been extensively investigated yet. Consequently, in this paper the results of a thorough experimental study of this influence on a full-scale glass panel supported by adhesive point-fixings is presented and analysed.
The experimental results demonstrate that the edge distance has a significant influence on the stress distribution and deflection of the glass panel: stresses and deformations are reduced with increasing edge distance.},
  author       = {Dispersyn, Jonas and Belis, Jan and Martens, Kenny and De Jaegher, Jolien},
  booktitle    = {IABSE REPORTS 104},
  editor       = {Fujino, Yozo},
  isbn         = {9783857481383},
  keyword      = {Structural glass,Structural analysis,Adhesive,Edge distance,Point-fixing},
  language     = {eng},
  location     = {Nara, Japan},
  pages        = {1--8},
  publisher    = {IABSE},
  title        = {Experimental investigation of the edge distance of adhesive point-fixings in glass},
  year         = {2015},
}

Chicago
Dispersyn, Jonas, Jan Belis, Kenny Martens, and Jolien De Jaegher. 2015. “Experimental Investigation of the Edge Distance of Adhesive Point-fixings in Glass.” In IABSE REPORTS 104, ed. Yozo Fujino, 1–8. Zurich: IABSE.
APA
Dispersyn, J., Belis, J., Martens, K., & De Jaegher, J. (2015). Experimental investigation of the edge distance of adhesive point-fixings in glass. In Y. Fujino (Ed.), IABSE REPORTS 104 (pp. 1–8). Presented at the IABSE CONFERENCE NARA 2015 : Elegance in Structures, Zurich: IABSE.
Vancouver
1.
Dispersyn J, Belis J, Martens K, De Jaegher J. Experimental investigation of the edge distance of adhesive point-fixings in glass. In: Fujino Y, editor. IABSE REPORTS 104. Zurich: IABSE; 2015. p. 1–8.
MLA
Dispersyn, Jonas, Jan Belis, Kenny Martens, et al. “Experimental Investigation of the Edge Distance of Adhesive Point-fixings in Glass.” IABSE REPORTS 104. Ed. Yozo Fujino. Zurich: IABSE, 2015. 1–8. Print.