Ghent University Academic Bibliography

Advanced

High-speed characterization of ECN spray: a using various diagnostic techniques

Maarten Meijer, Jonas Galle, Bart LMT Somers, Hans JGH Griensven and Sebastian Verhelst UGent (2013) SAE INTERNATIONAL JOURNAL OF ENGINES. 6(2).
abstract
Diesel spray experimentation at controlled high-temperature and high-pressure conditions is intended to provide a more fundamental understanding of diesel combustion than can be achieved in engine experiments. This level of understanding is needed to develop the high-fidelity multi-scale CFD models that will be used to optimize future engine designs. Several spray chamber facilities capable of high-temperature, igh-pressure conditions typical of engine combustion have been developed, but because of the uniqueness of each facility, there are uncertainties about their operation. The Engine Combustion Network (ECN) is a worldwide group of institutions using combustion vessels, whose aim is to advance the state of spray and combustion knowledge at engine-relevant conditions. A key activity is the use of spray chamber facilities operated at specific target conditions in order to leverage research capabilities and advanced diagnostics of all ECN participants. The first target condition, called “Spray A”, has been defined with detailed ambient and injector conditions. For this paper, we describe results from the constant-volume pre-burn vessel at Eindhoven University of Technology. The executed measurements include a wide range of diagnostics to characterize “spray A” in reacting and non-reacting conditions in great detail. Observations of spray penetration, ignition, liquid length and flame lift-off location by using several high-speed imaging diagnostics are discussed and compared with other ECN participating institutes. Comparison Spray A data from the other participating institutes, as it was presented during the 2nd ECN workshop is gathered from the ECN website database [1]. It can be concluded that the obtained results from the standardized ECN spray diagnostics, show satisfactory similarity, despite of the challenge to reach similar boundary conditions (ambient and injector) in each of the unique facilities. The differences in results are within the measurement deviation and uncertainty or can be explained by the usage of (slightly) different injectors. Combining the results of the different measurement techniques provides an overall (time resolved) overview where the different phases of fuel injection are directly linked and summarized. The presented overview provides a direct input for (CFD) modeling validation.
Please use this url to cite or link to this publication:
author
organization
year
type
conference
publication status
published
subject
keyword
combustion, high speed imaging diagnostics, diesel spray, constant volume combustion chamber, ECN
in
SAE INTERNATIONAL JOURNAL OF ENGINES
volume
6
issue
2
pages
11 pages
conference name
SAE world congress
conference location
Detroit , Michigan, USA
conference start
2013-04-16
conference end
2013-04-18
ISSN
1946-3936
DOI
10.4271/2013-01-1616
language
English
UGent publication?
yes
classification
C1
copyright statement
I have transferred the copyright for this publication to the publisher
id
3203546
handle
http://hdl.handle.net/1854/LU-3203546
date created
2013-04-26 17:24:55
date last changed
2016-12-19 15:37:32
@inproceedings{3203546,
  abstract     = {Diesel spray experimentation at controlled high-temperature and high-pressure conditions is intended to provide a more fundamental understanding of diesel combustion than can be achieved in engine experiments. This level of understanding is needed to develop the high-fidelity multi-scale CFD models that will be used to optimize future engine designs. Several spray chamber facilities capable of high-temperature, igh-pressure conditions typical of engine combustion have been developed, but because of the uniqueness of each facility, there are uncertainties about their operation. The Engine Combustion Network (ECN) is a worldwide group of institutions using combustion vessels, whose aim is to advance the state of spray and combustion knowledge at engine-relevant conditions. A key activity is the use of spray chamber facilities operated at specific target conditions in order to leverage research capabilities and advanced diagnostics of all ECN participants. The first target condition, called {\textquotedblleft}Spray A{\textquotedblright}, has been defined with detailed ambient and injector conditions. For this paper, we describe results from the constant-volume pre-burn vessel at Eindhoven University of Technology. The executed measurements include a wide range of diagnostics to characterize {\textquotedblleft}spray A{\textquotedblright} in reacting and non-reacting conditions in great detail. Observations of spray penetration, ignition, liquid length and flame lift-off location by using several high-speed imaging diagnostics are discussed and compared with other ECN participating institutes. Comparison Spray A data from the other participating institutes, as it was presented during the 2nd ECN workshop is gathered from the ECN website database [1]. It can be concluded that the obtained results from the standardized ECN spray diagnostics, show satisfactory similarity, despite of the challenge to reach similar boundary conditions (ambient and injector) in each of the unique facilities. The differences in results are within the measurement deviation and uncertainty or can be explained by the usage of (slightly) different injectors. Combining the results of the different measurement techniques provides an overall (time resolved) overview where the different phases of fuel injection are directly linked and summarized. The presented overview provides a direct input for (CFD) modeling validation.},
  author       = {Meijer, Maarten and Galle, Jonas and Somers, Bart LMT and Griensven, Hans JGH and Verhelst, Sebastian},
  booktitle    = {SAE INTERNATIONAL JOURNAL OF ENGINES},
  issn         = {1946-3936},
  keyword      = {combustion,high speed imaging diagnostics,diesel spray,constant volume combustion chamber,ECN},
  language     = {eng},
  location     = {Detroit , Michigan, USA},
  number       = {2},
  pages        = {11},
  title        = {High-speed characterization of ECN spray: a using various diagnostic techniques},
  url          = {http://dx.doi.org/10.4271/2013-01-1616},
  volume       = {6},
  year         = {2013},
}

Chicago
Meijer, Maarten, Jonas Galle, Bart LMT Somers, Hans JGH Griensven, and Sebastian Verhelst. 2013. “High-speed Characterization of ECN Spray: a Using Various Diagnostic Techniques.” In Sae International Journal of Engines. Vol. 6.
APA
Meijer, M., Galle, J., Somers, B. L., Griensven, H. J., & Verhelst, S. (2013). High-speed characterization of ECN spray: a using various diagnostic techniques. SAE INTERNATIONAL JOURNAL OF ENGINES (Vol. 6). Presented at the SAE world congress.
Vancouver
1.
Meijer M, Galle J, Somers BL, Griensven HJ, Verhelst S. High-speed characterization of ECN spray: a using various diagnostic techniques. SAE INTERNATIONAL JOURNAL OF ENGINES. 2013.
MLA
Meijer, Maarten, Jonas Galle, Bart LMT Somers, et al. “High-speed Characterization of ECN Spray: a Using Various Diagnostic Techniques.” Sae International Journal of Engines. Vol. 6. 2013. Print.