Experimental investigation of unconventional canopy prototypes, suspended by adhesive bonds
- Author
- Jan Belis (UGent) , Arno Van Hulle (UGent) , Dieter Callewaert (UGent) , Jonas Dispersyn (UGent) and Bas Out
- Organization
- Abstract
- In this contribution the performance of an adhesively bonded glass to metal connection with a carefully selected epoxy adhesive is investigated experimentally. Deliberately pushing the limits of conventional safety concepts for the sake of the experiment, laminated glass canopies were suspended on stainless steel local point-fixings, adhesively bonded to the upper glass sheet only. Subsequently, the suspended system was subjected to a ball-drop test, a uniform load and a hammer impact. Different glass types and canopy arrangements have been tested in this way. Depending on the design parameters, several compositions demonstrated surprisingly good residual structural safety: even after 24 hours of full loading in broken conditions, the heat-strengthened canopy configurations did not collopse.
- Keywords
- Impact, Residual capacity., Epoxy, Experiment, Adhesive bond, Glass
Downloads
-
(...).pdf
- full text
- |
- UGent only
- |
- |
- 982.79 KB
Citation
Please use this url to cite or link to this publication: http://hdl.handle.net/1854/LU-3000762
- MLA
- Belis, Jan, et al. “Experimental Investigation of Unconventional Canopy Prototypes, Suspended by Adhesive Bonds.” CHALLENGING GLASS 3, edited by Freek Bos et al., IOS Press, 2012, pp. 177–86, doi:10.3233/978-1-61499-061-1-177.
- APA
- Belis, J., Van Hulle, A., Callewaert, D., Dispersyn, J., & Out, B. (2012). Experimental investigation of unconventional canopy prototypes, suspended by adhesive bonds. In F. Bos, C. Louter, R. Nijsse, & F. Veer (Eds.), CHALLENGING GLASS 3 (pp. 177–186). https://doi.org/10.3233/978-1-61499-061-1-177
- Chicago author-date
- Belis, Jan, Arno Van Hulle, Dieter Callewaert, Jonas Dispersyn, and Bas Out. 2012. “Experimental Investigation of Unconventional Canopy Prototypes, Suspended by Adhesive Bonds.” In CHALLENGING GLASS 3, edited by Freek Bos, Christian Louter, Rob Nijsse, and Fred Veer, 177–86. Amsterdam, The Netherlands: IOS Press. https://doi.org/10.3233/978-1-61499-061-1-177.
- Chicago author-date (all authors)
- Belis, Jan, Arno Van Hulle, Dieter Callewaert, Jonas Dispersyn, and Bas Out. 2012. “Experimental Investigation of Unconventional Canopy Prototypes, Suspended by Adhesive Bonds.” In CHALLENGING GLASS 3, ed by. Freek Bos, Christian Louter, Rob Nijsse, and Fred Veer, 177–186. Amsterdam, The Netherlands: IOS Press. doi:10.3233/978-1-61499-061-1-177.
- Vancouver
- 1.Belis J, Van Hulle A, Callewaert D, Dispersyn J, Out B. Experimental investigation of unconventional canopy prototypes, suspended by adhesive bonds. In: Bos F, Louter C, Nijsse R, Veer F, editors. CHALLENGING GLASS 3. Amsterdam, The Netherlands: IOS Press; 2012. p. 177–86.
- IEEE
- [1]J. Belis, A. Van Hulle, D. Callewaert, J. Dispersyn, and B. Out, “Experimental investigation of unconventional canopy prototypes, suspended by adhesive bonds,” in CHALLENGING GLASS 3, Delft, the Netherlands, 2012, pp. 177–186.
@inproceedings{3000762,
abstract = {{In this contribution the performance of an adhesively bonded glass to metal connection with a carefully selected epoxy adhesive is investigated experimentally. Deliberately pushing the limits of conventional safety concepts for the sake of the experiment, laminated glass canopies were suspended on stainless steel local point-fixings, adhesively bonded to the upper glass sheet only. Subsequently, the suspended system was subjected to a ball-drop test, a uniform load and a hammer impact. Different glass types and canopy arrangements have been tested in this way. Depending on the design parameters, several compositions demonstrated surprisingly good residual structural safety: even after 24 hours of full loading in broken conditions, the heat-strengthened canopy configurations did not collopse.}},
author = {{Belis, Jan and Van Hulle, Arno and Callewaert, Dieter and Dispersyn, Jonas and Out, Bas}},
booktitle = {{CHALLENGING GLASS 3}},
editor = {{Bos, Freek and Louter, Christian and Nijsse, Rob and Veer, Fred}},
isbn = {{9781614990604}},
keywords = {{Impact,Residual capacity.,Epoxy,Experiment,Adhesive bond,Glass}},
language = {{eng}},
location = {{Delft, the Netherlands}},
pages = {{177--186}},
publisher = {{IOS Press}},
title = {{Experimental investigation of unconventional canopy prototypes, suspended by adhesive bonds}},
url = {{http://doi.org/10.3233/978-1-61499-061-1-177}},
year = {{2012}},
}
- Altmetric
- View in Altmetric
- Web of Science
- Times cited: