Ghent University Academic Bibliography

Advanced

Resonant bending fatigue test setup for pipes with optical displacement measuring system

Jeroen Van Wittenberghe UGent, Patrick De Baets UGent, Wim De Waele UGent, Wouter Ost UGent, Matthias Verstraete UGent and Stijn Hertelé UGent (2012) JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME. 134(3).
abstract
Pipes and tubular members are used in offshore applications as structural elements, such as columns or in transport pipelines, risers, etc. When subjected to dynamic loads, weld defects or geometrical stress raisers can initiate fatigue cracks, causing the columns or pipelines to fail prematurely. In order to investigate the fatigue behavior of pipe joints, a resonant bending fatigue setup was designed, suitable for testing pipes within a diameter range from 6 in. to 20 in. In this setup, the pipe, filled with water, is subjected to a dynamic excitation force with a frequency close to the natural frequency of the filled pipe. The force is applied using a unique drive unit with excentric masses. The pipe is supported in the nodes of its natural wave-form, so that no dynamic forces are transmitted to the setup. The deformation of the pipe is measured at discrete locations using an optical 3D dynamic measuring system. Through-thickness fatigue cracks can be detected by pressurizing the water in the pipe and applying a pressure gauge. In this paper, some unique aspects of the design of the resonant bending fatigue setup are discussed by presenting the results of a semianalytical model used for calculating the deformation and bending stress in the excitated pipe and by comparing these results to the deformation measurements made by the dynamic measuring system. The working principles of the setup are illustrated by showing the preliminary test results for a 12 in. diameter X65 steel pipe with a wall thickness of 12.7 mm. It is demonstrated that the model predicts the behavior of the pipe in the setup very accurately.
Please use this url to cite or link to this publication:
author
organization
year
type
journalArticle (original)
publication status
published
subject
keyword
BEHAVIOR
journal title
JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME
J. Offshore Mech. Arct. Eng. Trans. ASME
volume
134
issue
3
article_number
031702
pages
6 pages
Web of Science type
Article
Web of Science id
000300661600007
JCR category
ENGINEERING, OCEAN
JCR impact factor
0.506 (2012)
JCR rank
9/15 (2012)
JCR quartile
3 (2012)
ISSN
0892-7219
DOI
10.1115/1.4005182
language
English
UGent publication?
yes
classification
A1
copyright statement
I have transferred the copyright for this publication to the publisher
id
2078647
handle
http://hdl.handle.net/1854/LU-2078647
date created
2012-03-31 13:44:10
date last changed
2012-04-02 11:15:17
@article{2078647,
  abstract     = {Pipes and tubular members are used in offshore applications as structural elements, such as columns or in transport pipelines, risers, etc. When subjected to dynamic loads, weld defects or geometrical stress raisers can initiate fatigue cracks, causing the columns or pipelines to fail prematurely. In order to investigate the fatigue behavior of pipe joints, a resonant bending fatigue setup was designed, suitable for testing pipes within a diameter range from 6 in. to 20 in. In this setup, the pipe, filled with water, is subjected to a dynamic excitation force with a frequency close to the natural frequency of the filled pipe. The force is applied using a unique drive unit with excentric masses. The pipe is supported in the nodes of its natural wave-form, so that no dynamic forces are transmitted to the setup. The deformation of the pipe is measured at discrete locations using an optical 3D dynamic measuring system. Through-thickness fatigue cracks can be detected by pressurizing the water in the pipe and applying a pressure gauge. In this paper, some unique aspects of the design of the resonant bending fatigue setup are discussed by presenting the results of a semianalytical model used for calculating the deformation and bending stress in the excitated pipe and by comparing these results to the deformation measurements made by the dynamic measuring system. The working principles of the setup are illustrated by showing the preliminary test results for a 12 in. diameter X65 steel pipe with a wall thickness of 12.7 mm. It is demonstrated that the model predicts the behavior of the pipe in the setup very accurately.},
  articleno    = {031702},
  author       = {Van Wittenberghe, Jeroen and De Baets, Patrick and De Waele, Wim and Ost, Wouter and Verstraete, Matthias and Hertel{\'e}, Stijn},
  issn         = {0892-7219},
  journal      = {JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME},
  keyword      = {BEHAVIOR},
  language     = {eng},
  number       = {3},
  pages        = {6},
  title        = {Resonant bending fatigue test setup for pipes with optical displacement measuring system},
  url          = {http://dx.doi.org/10.1115/1.4005182},
  volume       = {134},
  year         = {2012},
}

Chicago
Van Wittenberghe, Jeroen, Patrick De Baets, Wim De Waele, Wouter Ost, Matthias Verstraete, and Stijn Hertelé. 2012. “Resonant Bending Fatigue Test Setup for Pipes with Optical Displacement Measuring System.” Journal of Offshore Mechanics and Arctic Engineering-transactions of the Asme 134 (3).
APA
Van Wittenberghe, J., De Baets, P., De Waele, W., Ost, W., Verstraete, M., & Hertelé, S. (2012). Resonant bending fatigue test setup for pipes with optical displacement measuring system. JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME, 134(3).
Vancouver
1.
Van Wittenberghe J, De Baets P, De Waele W, Ost W, Verstraete M, Hertelé S. Resonant bending fatigue test setup for pipes with optical displacement measuring system. JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME. 2012;134(3).
MLA
Van Wittenberghe, Jeroen, Patrick De Baets, Wim De Waele, et al. “Resonant Bending Fatigue Test Setup for Pipes with Optical Displacement Measuring System.” JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME 134.3 (2012): n. pag. Print.