Ghent University Academic Bibliography

Advanced

Characterisation of a resonant bending fatigue setup for pipes

Jonas Claeys UGent, Jeroen Van Wittenberghe, Patrick De Baets UGent and Wim De Waele UGent (2011) SUSTAINABLE CONSTRUCTION AND DESIGN. 2(3). p.424-431
abstract
This paper discusses the resonant bending fatigue test setup designed at laboratory Soete for full-scale fatigue tests on pipes. Following an enumeration of other types of fatigue test setups an attempt is made to characterise the resonant bending machine. The characterisation is obtained by conducting different tests on a steel pipe of grade API X65. Concordance between measured and calculated stresses and influence of excentre position on stress amplitude is discussed. High frequencies and small power input make this test setup very effective. The analytical model correctly predicts the measured stresses and a stress versus excentre curve is obtained. However not yet fully defined, it gives a first indication for the excentre position when preparing for a fatigue test.
Please use this url to cite or link to this publication:
author
organization
year
type
conference
publication status
published
subject
keyword
stress amplitude, Resonant bending fatigue, X65 pipe, full-scale
in
SUSTAINABLE CONSTRUCTION AND DESIGN
Sustain. Constr. Des.
editor
Jeroen Van Wittenberghe
volume
2
issue
3
issue title
Student contributions to the third Day of Research
pages
424 - 431
publisher
Ghent University, Laboratory Soete
place of publication
Ghent, Belgium
conference name
Sustainable Construction and Design 2011 (SCAD)
conference location
Ghent, Belgium
conference start
2011-02-16
conference end
2011-02-17
ISSN
2032-7471
ISBN
9789490726010
language
English
UGent publication?
yes
classification
C1
copyright statement
I have transferred the copyright for this publication to the publisher
id
1178831
handle
http://hdl.handle.net/1854/LU-1178831
date created
2011-03-01 13:24:02
date last changed
2017-01-02 09:52:26
@inproceedings{1178831,
  abstract     = {This paper discusses the resonant bending fatigue test setup designed at laboratory Soete for full-scale fatigue tests on pipes. Following an enumeration of other types of fatigue test setups an attempt is made to characterise the resonant bending machine. The characterisation is obtained by conducting different tests on a steel pipe of grade API X65. Concordance between measured and calculated stresses and influence of excentre position on stress amplitude is discussed. High frequencies and small power input make this test setup very effective. The analytical model correctly predicts the measured stresses and a stress versus excentre curve is obtained. However not yet fully defined, it gives a first indication for the excentre position when preparing for a fatigue test.},
  author       = {Claeys, Jonas and Van Wittenberghe, Jeroen and De Baets, Patrick and De Waele, Wim},
  booktitle    = {SUSTAINABLE CONSTRUCTION AND DESIGN},
  editor       = {Van Wittenberghe, Jeroen},
  isbn         = {9789490726010},
  issn         = {2032-7471},
  keyword      = {stress amplitude,Resonant bending fatigue,X65 pipe,full-scale},
  language     = {eng},
  location     = {Ghent, Belgium},
  number       = {3},
  pages        = {424--431},
  publisher    = {Ghent University, Laboratory Soete},
  title        = {Characterisation of a resonant bending fatigue setup for pipes},
  volume       = {2},
  year         = {2011},
}

Chicago
Claeys, Jonas, Jeroen Van Wittenberghe, Patrick De Baets, and Wim De Waele. 2011. “Characterisation of a Resonant Bending Fatigue Setup for Pipes.” In Sustainable Construction and Design, ed. Jeroen Van Wittenberghe, 2:424–431. Ghent, Belgium: Ghent University, Laboratory Soete.
APA
Claeys, Jonas, Van Wittenberghe, J., De Baets, P., & De Waele, W. (2011). Characterisation of a resonant bending fatigue setup for pipes. In J. Van Wittenberghe (Ed.), SUSTAINABLE CONSTRUCTION AND DESIGN (Vol. 2, pp. 424–431). Presented at the Sustainable Construction and Design 2011 (SCAD), Ghent, Belgium: Ghent University, Laboratory Soete.
Vancouver
1.
Claeys J, Van Wittenberghe J, De Baets P, De Waele W. Characterisation of a resonant bending fatigue setup for pipes. In: Van Wittenberghe J, editor. SUSTAINABLE CONSTRUCTION AND DESIGN. Ghent, Belgium: Ghent University, Laboratory Soete; 2011. p. 424–31.
MLA
Claeys, Jonas, Jeroen Van Wittenberghe, Patrick De Baets, et al. “Characterisation of a Resonant Bending Fatigue Setup for Pipes.” Sustainable Construction and Design. Ed. Jeroen Van Wittenberghe. Vol. 2. Ghent, Belgium: Ghent University, Laboratory Soete, 2011. 424–431. Print.