Ghent University Academic Bibliography

Advanced

A view on the strategy in the processing of hot rolled dual phase steels

Frans Leysen UGent, Jan Penning UGent and Yvan Houbaert UGent (2010) Materials Science Forum. In Materials Science Forum 638-642. p.3343-3349
abstract
As already intensive studies related to the processing of hot rolled dual phase steels have been reported in the past, the aim of this particular paper is to present some details within a processing strategy, that can be considered as useful for the processing of other special steel types. It will be shown that based on fundamental dilatometric measurements performed in the laboratory, a narrow window of processing parameters can be focused at. Moreover, practical dilatometric curves are shown, taking into account the transformation heat release in the arrested cooling zone (dry section), as to be considered regarding the industrial practice. Furthermore, by introducing a slab insert technique within the development schedule, not only time consuming research can be limited, especially main objectives can be achieved. Some of these objectives are: a) a simultaneous study of the influences of the chemical composition of the steels, b) a close control of the thermomechanical parameters encountered in the industrial environment, such as rolling reductions, strain rate and inter pass time conditions, c) a check of the homogeneity of mechanical properties versus the coil length.
Please use this url to cite or link to this publication:
author
organization
year
type
conference
publication status
published
subject
keyword
DP Steels, Slab Insert, Dilatometry, Hot Rolling
in
Materials Science Forum
Mater. Sci. Forum
editor
T Chandra, N Wanderka, W Reimers and M Ionescu
series title
Materials Science Forum
volume
638-642
issue title
THERMEC 2009, pts 1-4
pages
3343 - 3349
publisher
Trans Tech
place of publication
Stafa-Zürich, Switzerland
conference name
6th International conference on Processing and Manufacturing of Advanced Materials (THERMEC 2009)
conference location
Berlin, Germany
conference start
2009-08-25
conference end
2009-08-29
Web of Science type
Proceedings Paper
Web of Science id
000281043801219
ISSN
0255-5476
DOI
10.4028/www.scientific.net/MSF.638-642.3343
language
English
UGent publication?
yes
classification
P1
copyright statement
I have transferred the copyright for this publication to the publisher
id
1081981
handle
http://hdl.handle.net/1854/LU-1081981
date created
2010-12-03 14:48:23
date last changed
2011-09-27 15:42:26
@inproceedings{1081981,
  abstract     = {As already intensive studies related to the processing of hot rolled dual phase steels have been reported in the past, the aim of this particular paper is to present some details within a processing strategy, that can be considered as useful for the processing of other special steel types. It will be shown that based on fundamental dilatometric measurements performed in the laboratory, a narrow window of processing parameters can be focused at. Moreover, practical dilatometric curves are shown, taking into account the transformation heat release in the arrested cooling zone (dry section), as to be considered regarding the industrial practice.
Furthermore, by introducing a slab insert technique within the development schedule, not only time consuming research can be limited, especially main objectives can be achieved. Some of these objectives are: a) a simultaneous study of the influences of the chemical composition of the steels, b) a close control of the thermomechanical parameters encountered in the industrial environment, such as rolling reductions, strain rate and inter pass time conditions, c) a check of the homogeneity of mechanical properties versus the coil length.},
  author       = {Leysen, Frans and Penning, Jan and Houbaert, Yvan},
  booktitle    = {Materials Science Forum},
  editor       = {Chandra, T and Wanderka, N and Reimers, W and Ionescu, M},
  issn         = {0255-5476},
  keyword      = {DP Steels,Slab Insert,Dilatometry,Hot Rolling},
  language     = {eng},
  location     = {Berlin, Germany},
  pages        = {3343--3349},
  publisher    = {Trans Tech},
  title        = {A view on the strategy in the processing of hot rolled dual phase steels},
  url          = {http://dx.doi.org/10.4028/www.scientific.net/MSF.638-642.3343},
  volume       = {638-642},
  year         = {2010},
}

Chicago
Leysen, Frans, Jan Penning, and Yvan Houbaert. 2010. “A View on the Strategy in the Processing of Hot Rolled Dual Phase Steels.” In Materials Science Forum, ed. T Chandra, N Wanderka, W Reimers, and M Ionescu, 638-642:3343–3349. Stafa-Zürich, Switzerland: Trans Tech.
APA
Leysen, F., Penning, J., & Houbaert, Y. (2010). A view on the strategy in the processing of hot rolled dual phase steels. In T. Chandra, N. Wanderka, W. Reimers, & M. Ionescu (Eds.), Materials Science Forum (Vol. 638–642, pp. 3343–3349). Presented at the 6th International conference on Processing and Manufacturing of Advanced Materials (THERMEC 2009), Stafa-Zürich, Switzerland: Trans Tech.
Vancouver
1.
Leysen F, Penning J, Houbaert Y. A view on the strategy in the processing of hot rolled dual phase steels. In: Chandra T, Wanderka N, Reimers W, Ionescu M, editors. Materials Science Forum. Stafa-Zürich, Switzerland: Trans Tech; 2010. p. 3343–9.
MLA
Leysen, Frans, Jan Penning, and Yvan Houbaert. “A View on the Strategy in the Processing of Hot Rolled Dual Phase Steels.” Materials Science Forum. Ed. T Chandra et al. Vol. 638–642. Stafa-Zürich, Switzerland: Trans Tech, 2010. 3343–3349. Print.