Effect of corrosion on fretting wear morphology and mechanical behaviors of wires
- Author
- Gaofang Wang (UGent) , Yuxing Peng, Xiangdong Chang, Kun Huang, Chao Li (UGent) , Muhammad Imran (UGent) and Magd Abdel Wahab (UGent)
- Organization
- Abstract
- Corrosion and fretting wear inevitably occur in wires, which are important parts of cables. To study the wear morphology and surface mechanical behavior of wires for different fretting and corrosion times, a numerical model of fretting wear of wire with different corrosion conditions is established using MATLAB and ABAQUS software’s. Firstly, according to the surface roughness of wires under different corrosion times, the node coordinates in the numerical model are modified to simulate different rough surfaces. Secondly, the wear characteristics of wires under different fretting cycles are obtained by using a cycle jump concept and an ABAQUS user subroutine. Finally, the numerical model is validated using experimental data. The results show that when the corrosion time is 0 h, the wear area has a regular oval shape. The wear volumes of wires with corrosion times of 120 h and 480 h are the largest and the smallest, respectively. As wear volume increases, both residual surface contact pressure and stress decrease. When the corrosion time is 0 h and 120 h, the residual surface contact pressure is maximum and minimum, respectively.
Downloads
-
(...).pdf
- full text (Published version)
- |
- UGent only
- |
- |
- 14.45 MB
-
Paper 3 Gaofang v4 maw clean.docx
- full text (Accepted manuscript)
- |
- open access
- |
- Word
- |
- 49.14 MB
Citation
Please use this url to cite or link to this publication: http://hdl.handle.net/1854/LU-01J2BKNS5EH2TYCX5H72CFCWD0
- MLA
- Wang, Gaofang, et al. “Effect of Corrosion on Fretting Wear Morphology and Mechanical Behaviors of Wires.” TRIBOLOGY INTERNATIONAL, vol. 199, 2024, doi:10.1016/j.triboint.2024.109939.
- APA
- Wang, G., Peng, Y., Chang, X., Huang, K., Li, C., Imran, M., & Abdel Wahab, M. (2024). Effect of corrosion on fretting wear morphology and mechanical behaviors of wires. TRIBOLOGY INTERNATIONAL, 199. https://doi.org/10.1016/j.triboint.2024.109939
- Chicago author-date
- Wang, Gaofang, Yuxing Peng, Xiangdong Chang, Kun Huang, Chao Li, Muhammad Imran, and Magd Abdel Wahab. 2024. “Effect of Corrosion on Fretting Wear Morphology and Mechanical Behaviors of Wires.” TRIBOLOGY INTERNATIONAL 199. https://doi.org/10.1016/j.triboint.2024.109939.
- Chicago author-date (all authors)
- Wang, Gaofang, Yuxing Peng, Xiangdong Chang, Kun Huang, Chao Li, Muhammad Imran, and Magd Abdel Wahab. 2024. “Effect of Corrosion on Fretting Wear Morphology and Mechanical Behaviors of Wires.” TRIBOLOGY INTERNATIONAL 199. doi:10.1016/j.triboint.2024.109939.
- Vancouver
- 1.Wang G, Peng Y, Chang X, Huang K, Li C, Imran M, et al. Effect of corrosion on fretting wear morphology and mechanical behaviors of wires. TRIBOLOGY INTERNATIONAL. 2024;199.
- IEEE
- [1]G. Wang et al., “Effect of corrosion on fretting wear morphology and mechanical behaviors of wires,” TRIBOLOGY INTERNATIONAL, vol. 199, 2024.
@article{01J2BKNS5EH2TYCX5H72CFCWD0,
abstract = {{Corrosion and fretting wear inevitably occur in wires, which are important parts of cables. To study the wear morphology and surface mechanical behavior of wires for different fretting and corrosion times, a numerical model of fretting wear of wire with different corrosion conditions is established using MATLAB and ABAQUS software’s. Firstly, according to the surface roughness of wires under different corrosion times, the node coordinates in the numerical model are modified to simulate different rough surfaces. Secondly, the wear characteristics of wires under different fretting cycles are obtained by using a cycle jump concept and an ABAQUS user subroutine. Finally, the numerical model is validated using experimental data. The results show that when the corrosion time is 0 h, the wear area has a regular oval shape. The wear volumes of wires with corrosion times of 120 h and 480 h are the largest and the smallest, respectively. As wear volume increases, both residual surface contact pressure and stress decrease. When the corrosion time is 0 h and 120 h, the residual surface contact pressure is maximum and minimum, respectively.}},
articleno = {{109939}},
author = {{Wang, Gaofang and Peng, Yuxing and Chang, Xiangdong and Huang, Kun and Li, Chao and Imran, Muhammad and Abdel Wahab, Magd}},
issn = {{0301-679X}},
journal = {{TRIBOLOGY INTERNATIONAL}},
language = {{eng}},
pages = {{15}},
title = {{Effect of corrosion on fretting wear morphology and mechanical behaviors of wires}},
url = {{http://doi.org/10.1016/j.triboint.2024.109939}},
volume = {{199}},
year = {{2024}},
}
- Altmetric
- View in Altmetric
- Web of Science
- Times cited: