Development of photo-crosslinked poly(aspartic acid) fiber networks via electrospinning
- Author
- Lauren De Grave, Katrien V. Bernaerts and Sandra Van Vlierberghe (UGent)
- Organization
- Project
- Abstract
- Poly(aspartic acid) (pAsp)-based fiber networks were developed via electrospinning and photo-crosslinking. Fiber networks hold the advantage that they exhibit a high surface-to-volume ratio, giving rise to a high water uptake and retention capacity, along with the ability to release moisture under desired circumstances (e.g. reduced relative humidity, mechanical pressure, etc.). Herein, polysuccinimide (PSI), the precursor of pAsp, was modified with 5-norbornene-2-methylamine to obtain crosslinkable norbornene-modified PSI (PSI-NB) with two different degrees of substitution, i.e. 19% and 46%. These derivatives were electrospun into thin uniform fibers after optimization of the processing parameters. The fiber sheets were crosslinked via a thiol-ene step-growth mechanism with three different thiol crosslinkers exploiting UV-A irradiation in the presence of TPO-L as photo-initiator. Using this strategy, fiber networks with diameters ranging between 1.27 ± 0.29 and 2.20 ± 1.05 µm were obtained, as visualized with scanning electron microscopy (SEM). Successful crosslinking was evidenced by a dissolution test in dimethylformamide and through X-ray photoelectron spectroscopy. Finally, the PSI-NB fiber networks were hydrolyzed to obtain pAsp-NB fiber networks by alkaline hydrolysis in a carbonate buffer solution, as confirmed by Fourier-transform infrared spectroscopy. The morphology of the fibers following hydrolysis was visualized by SEM and the average fiber diameters were calculated and compared to the diameters before hydrolysis, generally showing a diameter increase due to swelling of the fibers in aqueous solution. In conclusion, pAsp-based fiber networks were successfully developed and stabilized via photo-crosslinking.
- Keywords
- Polysuccinimide, Poly(aspartic acid), Electrospinning, Photo-crosslinking, Fiber networks
Downloads
-
Development of photo-crosslinked poly(aspartic acid) fiber networks via electrospinning.pdf
- full text
- |
- open access
- |
- |
- 3.86 MB
Citation
Please use this url to cite or link to this publication: http://hdl.handle.net/1854/LU-01HRPCYV8X2B9PFAFBRT2K36S7
- MLA
- De Grave, Lauren, et al. “Development of Photo-Crosslinked Poly(Aspartic Acid) Fiber Networks via Electrospinning.” NEXT MATERIALS, vol. 3, 2024, doi:10.1016/j.nxmate.2024.100172.
- APA
- De Grave, L., Bernaerts, K. V., & Van Vlierberghe, S. (2024). Development of photo-crosslinked poly(aspartic acid) fiber networks via electrospinning. NEXT MATERIALS, 3. https://doi.org/10.1016/j.nxmate.2024.100172
- Chicago author-date
- De Grave, Lauren, Katrien V. Bernaerts, and Sandra Van Vlierberghe. 2024. “Development of Photo-Crosslinked Poly(Aspartic Acid) Fiber Networks via Electrospinning.” NEXT MATERIALS 3. https://doi.org/10.1016/j.nxmate.2024.100172.
- Chicago author-date (all authors)
- De Grave, Lauren, Katrien V. Bernaerts, and Sandra Van Vlierberghe. 2024. “Development of Photo-Crosslinked Poly(Aspartic Acid) Fiber Networks via Electrospinning.” NEXT MATERIALS 3. doi:10.1016/j.nxmate.2024.100172.
- Vancouver
- 1.De Grave L, Bernaerts KV, Van Vlierberghe S. Development of photo-crosslinked poly(aspartic acid) fiber networks via electrospinning. NEXT MATERIALS. 2024;3.
- IEEE
- [1]L. De Grave, K. V. Bernaerts, and S. Van Vlierberghe, “Development of photo-crosslinked poly(aspartic acid) fiber networks via electrospinning,” NEXT MATERIALS, vol. 3, 2024.
@article{01HRPCYV8X2B9PFAFBRT2K36S7,
abstract = {{Poly(aspartic acid) (pAsp)-based fiber networks were developed via electrospinning and photo-crosslinking. Fiber networks hold the advantage that they exhibit a high surface-to-volume ratio, giving rise to a high water uptake and retention capacity, along with the ability to release moisture under desired circumstances (e.g. reduced relative humidity, mechanical pressure, etc.). Herein, polysuccinimide (PSI), the precursor of pAsp, was modified with 5-norbornene-2-methylamine to obtain crosslinkable norbornene-modified PSI (PSI-NB) with two different degrees of substitution, i.e. 19% and 46%. These derivatives were electrospun into thin uniform fibers after optimization of the processing parameters. The fiber sheets were crosslinked via a thiol-ene step-growth mechanism with three different thiol crosslinkers exploiting UV-A irradiation in the presence of TPO-L as photo-initiator. Using this strategy, fiber networks with diameters ranging between 1.27 ± 0.29 and 2.20 ± 1.05 µm were obtained, as visualized with scanning electron microscopy (SEM). Successful crosslinking was evidenced by a dissolution test in dimethylformamide and through X-ray photoelectron spectroscopy. Finally, the PSI-NB fiber networks were hydrolyzed to obtain pAsp-NB fiber networks by alkaline hydrolysis in a carbonate buffer solution, as confirmed by Fourier-transform infrared spectroscopy. The morphology of the fibers following hydrolysis was visualized by SEM and the average fiber diameters were calculated and compared to the diameters before hydrolysis, generally showing a diameter increase due to swelling of the fibers in aqueous solution. In conclusion, pAsp-based fiber networks were successfully developed and stabilized via photo-crosslinking.}},
articleno = {{100172}},
author = {{De Grave, Lauren and Bernaerts, Katrien V. and Van Vlierberghe, Sandra}},
issn = {{2949-8228}},
journal = {{NEXT MATERIALS}},
keywords = {{Polysuccinimide,Poly(aspartic acid),Electrospinning,Photo-crosslinking,Fiber networks}},
language = {{eng}},
pages = {{12}},
title = {{Development of photo-crosslinked poly(aspartic acid) fiber networks via electrospinning}},
url = {{http://doi.org/10.1016/j.nxmate.2024.100172}},
volume = {{3}},
year = {{2024}},
}
- Altmetric
- View in Altmetric