Layered model of fluid-structure interaction in dry wire drawing with coupled axial velocity
- Author
- Mathieu Vervaecke (UGent) , Dieter Fauconnier (UGent) and Joris Degroote (UGent)
- Organization
- Abstract
- An innovative 2D axisymmetric fluid-structure interaction model of wire drawing is developed to numerically investigate the interaction between the thin lubricant film and the plastically deforming steel wire. The deformation of the wire is obtained from the linear momentum balance and the lubricant film has been calculated by the Navier-Stokes equations. Moreover, the coupling between wire and lubricant is performed by the IQN-ILS technique and a no-slip condition is imposed on the sliding fluid-structure interaction interface. In order to reduce the computational cost, a layering technique is implemented in the axially moving structure domain. This results on the one hand in monitoring the stresses and displacements of the structure and on the other hand in an observation of the hydrodynamic pressure build-up and wall shear stresses in the lubricant. Additionally, the evolution of the fluid film thickness is presented.
Downloads
-
LastAuthor.pdf
- full text (Published version)
- |
- open access
- |
- |
- 2.82 MB
Citation
Please use this url to cite or link to this publication: http://hdl.handle.net/1854/LU-01HEXC3WHAC1VHYZKV5Y2WMWSH
- MLA
- Vervaecke, Mathieu, et al. “Layered Model of Fluid-Structure Interaction in Dry Wire Drawing with Coupled Axial Velocity.” 10th Edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2023), edited by M. Papadrakakis et al., 2023, doi:10.23967/c.coupled.2023.032.
- APA
- Vervaecke, M., Fauconnier, D., & Degroote, J. (2023). Layered model of fluid-structure interaction in dry wire drawing with coupled axial velocity. In M. Papadrakakis, B. Schrefler, & E. Oñate (Eds.), 10th edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2023). https://doi.org/10.23967/c.coupled.2023.032
- Chicago author-date
- Vervaecke, Mathieu, Dieter Fauconnier, and Joris Degroote. 2023. “Layered Model of Fluid-Structure Interaction in Dry Wire Drawing with Coupled Axial Velocity.” In 10th Edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2023), edited by M. Papadrakakis, B. Schrefler, and E. Oñate. https://doi.org/10.23967/c.coupled.2023.032.
- Chicago author-date (all authors)
- Vervaecke, Mathieu, Dieter Fauconnier, and Joris Degroote. 2023. “Layered Model of Fluid-Structure Interaction in Dry Wire Drawing with Coupled Axial Velocity.” In 10th Edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2023), ed by. M. Papadrakakis, B. Schrefler, and E. Oñate. doi:10.23967/c.coupled.2023.032.
- Vancouver
- 1.Vervaecke M, Fauconnier D, Degroote J. Layered model of fluid-structure interaction in dry wire drawing with coupled axial velocity. In: Papadrakakis M, Schrefler B, Oñate E, editors. 10th edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2023). 2023.
- IEEE
- [1]M. Vervaecke, D. Fauconnier, and J. Degroote, “Layered model of fluid-structure interaction in dry wire drawing with coupled axial velocity,” in 10th edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2023), Chania, Greece, 2023.
@inproceedings{01HEXC3WHAC1VHYZKV5Y2WMWSH,
abstract = {{An innovative 2D axisymmetric fluid-structure interaction model of wire drawing is developed to numerically investigate the interaction between the thin lubricant film and the plastically deforming steel wire. The deformation of the wire is obtained from the linear momentum balance and the lubricant film has been calculated by the Navier-Stokes equations. Moreover, the coupling between wire and lubricant is performed by the IQN-ILS technique and a no-slip condition is imposed on the sliding fluid-structure interaction interface. In order to reduce the computational cost, a layering technique is implemented in the axially moving structure domain. This results on the one hand in monitoring the stresses and displacements of the structure and on the other hand in an observation of the hydrodynamic pressure build-up and wall shear stresses in the lubricant. Additionally, the evolution of the fluid film thickness is presented.}},
author = {{Vervaecke, Mathieu and Fauconnier, Dieter and Degroote, Joris}},
booktitle = {{10th edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2023)}},
editor = {{Papadrakakis, M. and Schrefler, B. and Oñate, E.}},
language = {{eng}},
location = {{Chania, Greece}},
pages = {{12}},
title = {{Layered model of fluid-structure interaction in dry wire drawing with coupled axial velocity}},
url = {{http://doi.org/10.23967/c.coupled.2023.032}},
year = {{2023}},
}
- Altmetric
- View in Altmetric