Investigation of the dynamic strain aging effect in austenitic weld metals by 3D-DIC
- Author
- Amke Lescur, Erich Stergar, Jun Lim, Stijn Hertelé (UGent) and Roumen Petrov (UGent)
- Organization
- Abstract
- Austenitic stainless steels similar to type AISI 316L are widely used structural materials in current and future nuclear reactors. Careful development and characterization of these materials and their welds is needed to verify the structural integrity of large-scale multicomponent structures. Understanding the local deformation behavior in heterogeneous materials and the mechanisms involved is key to further improve the performance and reliability of the materials at the global scale and can help in developing more accurate models and design rules. The full-field 3D digital image correlation (3D-DIC) technique was used to characterize two 316L multi-pass welds, based on cylindrical uniaxial tensile tests at room temperature, 350 C, and 450 C. The results were compared to solution annealed 316L material. The inhomogeneous character and dynamic behavior of the 316L base and weld materials were successfully characterized using 3D-DIC data, yielding high-quality and accurate local strain calculations for geometrically challenging conditions. The difference in character of the dynamic strain aging (DSA) effect present in base and weld materials was identified, where local inhomogeneous straining in weld material resulted in discontinuous type A Portevin–Le Châtelier (PLC) bands. This technique characterized the difference between local and global material behavior, whereas standard mechanical tests could not.
- Keywords
- 3D-DIC, 316L, multi-pass welds, dynamic strain aging, PLC effect, DIGITAL IMAGE CORRELATION, STAINLESS-STEEL, FRACTURE, TEMPERATURE, BEHAVIOR, DEFORMATION, TENSILE, BANDS
Downloads
-
Metals - 2023 - Dynamic strain ageing DIC.pdf
- full text (Published version)
- |
- open access
- |
- |
- 2.79 MB
Citation
Please use this url to cite or link to this publication: http://hdl.handle.net/1854/LU-01GRB5EVP6P8PFXYWMH0H1J33Z
- MLA
- Lescur, Amke, et al. “Investigation of the Dynamic Strain Aging Effect in Austenitic Weld Metals by 3D-DIC.” METALS, vol. 13, no. 2, MDPI, 2023, doi:10.3390/met13020311.
- APA
- Lescur, A., Stergar, E., Lim, J., Hertelé, S., & Petrov, R. (2023). Investigation of the dynamic strain aging effect in austenitic weld metals by 3D-DIC. METALS, 13(2). https://doi.org/10.3390/met13020311
- Chicago author-date
- Lescur, Amke, Erich Stergar, Jun Lim, Stijn Hertelé, and Roumen Petrov. 2023. “Investigation of the Dynamic Strain Aging Effect in Austenitic Weld Metals by 3D-DIC.” METALS 13 (2). https://doi.org/10.3390/met13020311.
- Chicago author-date (all authors)
- Lescur, Amke, Erich Stergar, Jun Lim, Stijn Hertelé, and Roumen Petrov. 2023. “Investigation of the Dynamic Strain Aging Effect in Austenitic Weld Metals by 3D-DIC.” METALS 13 (2). doi:10.3390/met13020311.
- Vancouver
- 1.Lescur A, Stergar E, Lim J, Hertelé S, Petrov R. Investigation of the dynamic strain aging effect in austenitic weld metals by 3D-DIC. METALS. 2023;13(2).
- IEEE
- [1]A. Lescur, E. Stergar, J. Lim, S. Hertelé, and R. Petrov, “Investigation of the dynamic strain aging effect in austenitic weld metals by 3D-DIC,” METALS, vol. 13, no. 2, 2023.
@article{01GRB5EVP6P8PFXYWMH0H1J33Z,
abstract = {{Austenitic stainless steels similar to type AISI 316L are widely used structural materials
in current and future nuclear reactors. Careful development and characterization of these materials
and their welds is needed to verify the structural integrity of large-scale multicomponent structures.
Understanding the local deformation behavior in heterogeneous materials and the mechanisms
involved is key to further improve the performance and reliability of the materials at the global
scale and can help in developing more accurate models and design rules. The full-field 3D digital
image correlation (3D-DIC) technique was used to characterize two 316L multi-pass welds, based on
cylindrical uniaxial tensile tests at room temperature, 350 C, and 450 C. The results were compared
to solution annealed 316L material. The inhomogeneous character and dynamic behavior of the 316L
base and weld materials were successfully characterized using 3D-DIC data, yielding high-quality
and accurate local strain calculations for geometrically challenging conditions. The difference in
character of the dynamic strain aging (DSA) effect present in base and weld materials was identified,
where local inhomogeneous straining in weld material resulted in discontinuous type A Portevin–Le
Châtelier (PLC) bands. This technique characterized the difference between local and global material
behavior, whereas standard mechanical tests could not.}},
articleno = {{311}},
author = {{Lescur, Amke and Stergar, Erich and Lim, Jun and Hertelé, Stijn and Petrov, Roumen}},
issn = {{2075-4701}},
journal = {{METALS}},
keywords = {{3D-DIC,316L,multi-pass welds,dynamic strain aging,PLC effect,DIGITAL IMAGE CORRELATION,STAINLESS-STEEL,FRACTURE,TEMPERATURE,BEHAVIOR,DEFORMATION,TENSILE,BANDS}},
language = {{eng}},
number = {{2}},
pages = {{14}},
publisher = {{MDPI}},
title = {{Investigation of the dynamic strain aging effect in austenitic weld metals by 3D-DIC}},
url = {{http://doi.org/10.3390/met13020311}},
volume = {{13}},
year = {{2023}},
}
- Altmetric
- View in Altmetric
- Web of Science
- Times cited: