prof. dr. ir. Geert De Schutter
- ORCID iD
- 0000-0001-5603-2616
Show
Sort by
-
- Journal Article
- A1
- open access
Interfacial bonding of 3D printable concrete with chemically reactive coating for automatic repair
-
Adhesion evaluation and interface characterization of 3D printed concrete for automatic repair
-
A comparison of magneto-responsive particles and testing protocols for active rheology control of cementitious materials
-
Early-age shrinkage assessment of cementitious materials : a critical review
-
Geometric Conformability of 3D Concrete Printing Mixtures from a Rheological Perspective
-
Influence of retarders on the hydration and rheology of calcium sulfo aluminate cement
-
- Conference Paper
- C1
- open access
Adhesion studies in view of automated repair using 3D concrete printing
-
Assessment of early-age drying induced microstructural changes in 3D printed cement mortar
-
- Journal Article
- A1
- open access
The effect of curing conditions on the service life of 3D printed concrete formwork
-
Influence of rheology on mixing homogeneity and mechanical behavior of twin-pipe 3D printable concrete
-
Set-on-demand of alkali-activated slag mixture using twin-pipe pumping
-
Enhancing mechanical performance of twin-pipe printable concrete using a binary binder system
-
- Journal Article
- A1
- open access
Twin-pipe pumping strategy for stiffening control of 3D printable concrete : from transportation to fabrication
-
Rheological and mechanical properties of 3D printable alkali-activated slag mixtures with addition of nano clay
-
- Journal Article
- A1
- open access
Characterisation of alkali-activated stainless steel slag and blast-furnace slag cements
-
- Journal Article
- A1
- open access
Evaluation of copper slag and stainless steel slag as replacements for blast furnace slag in binary and ternary alkali-activated cements
-
Interlayer bond and porosity of 3D printed concrete
-
Comparison of printability and mechanical properties of rigid and flexible fiber-reinforced 3D printed cement-based materials
-
Assessment of pore structure characteristics and tortuosity of 3D printed concrete using mercury intrusion porosimetry and X-ray tomography
-
- Journal Article
- A1
- open access
Extending 3D concrete printing to hard rock tunnel linings : adhesion of fresh cementitious materials for different surface inclinations
-
- Journal Article
- A1
- open access
Development of a calcium sulfoaluminate-Portland cement binary system for twin-pipe 3D concrete printing
-
- Journal Article
- A1
- open access
The evolution of the rheological behavior of hydrating cement systems : combining constitutive modeling with rheometry, calorimetry and mechanical analyses
-
- Journal Article
- A1
- open access
Recent progress and technical challenges in using calcium sulfoaluminate (CSA) cement
-
- Book Chapter
- open access
Active rheology control of cementitious materials with responsive polymers
-
- Journal Article
- A1
- open access
Responsive superplasticizers for active rheology control of cementitious materials
-
3D printed concrete as stay‐in‐place formwork : mechanics during casting and curing
-
Mix design insights for printable mortars based on structural build-up rate requirements
-
Structural build-up rate evaluation of printable mortars with CSA cement substitutions
-
- Conference Paper
- C3
- open access
Rheology design principles for 3D concrete printing
-
Transport properties of 3D printed concrete elements
-
Mechanical behavior of twin-pipe printed concrete
-
- Conference Paper
- C1
- open access
Adhesive properties of fresh cementitious materials as measured by the tack test
-
- Book Chapter
- open access
Properties and testing of printed cement-based materials in hardened state
-
- Conference Paper
- C1
- open access
Influence of the print process on the durability of printed cementitious materials
-
Using limestone powder as a carrier for the accelerator in extrusion-based 3D concrete printing
-
Evaluation of the bond strength between 3D printed and self-compacting concrete
-
Salt scaling resistance of 3D printed concrete
-
Effect of high-range water-reducing admixtures on alkali-activated slag concrete
-
Blending performance of helical static mixer used for twin-pipe 3D concrete printing
-
- Conference Paper
- C3
- open access
The shear strength of the interface between rock and printable concrete at super-young ages
-
- Conference Paper
- C3
- open access
Multiscale characteristics of layer interface in 3D printed cement-based materials
-
Stiffening controllable concrete modified with redispersible polymer powder for twin-pipe printing
-
Comparative study on the role of PAM and PANA on the property of fresh cement paste
-
Effect of steel fiber distribution on the mechanical properties of UHPC caused by vehicle-bridge coupling vibration
-
Synthesis and characterization of an intermediate for C-S-H structure tailoring
-
- Journal Article
- A1
- open access
Fresh and hardened properties of alkali-activated slag concrete : the effect of fly ash as a supplementary precursor
-
Rheological properties of concrete with manufactured sand : a multi-level prediction
-
- Journal Article
- A1
- open access
Effect of solid volume fraction on the magnetorheological response of nano-Fe3O4 incorporated cementitious paste
-
Hydration re-initiation of borated CSA systems with a two-stage mixing process : an application in extrusion-based concrete 3D printing
-
- Journal Article
- A1
- open access
Rheology and structural build-up of sodium silicate- and sodium hydroxide-activated GGBFS mixtures
-
Influence of aluminum sulfate on mobility and adhesion of hydroxyethyl methyl cellulose in cement-based materials for tunnel linings
-
A roadmap for quality control of hardening and hardened printed concrete
-
Insights in the chemical fundamentals of ASR and the role of calcium in the early stage based on a 3D reactive transport model
-
- Journal Article
- A1
- open access
Magneto-responsive structural build-up of highly flowable cementitious paste in the presence of PCE superplasticizer
-
Identification of multi-scale homogeneity of blended cement concrete : macro performance, micro and meso structure
-
Pumping of concrete : understanding a common placement method with lots of challenges
-
Evaluation of rheology and strength development of alkali-activated slag with different silicates sources
-
Influence of substrate surface roughness and moisture content on tensile adhesion performance of 3D printable concrete
-
- Journal Article
- A1
- open access
Rheology and microstructure of alkali-activated slag cements produced with silica fume activator
-
A 3D reactive transport model for simulation of the chemical reaction process of ASR at microscale
-
- Journal Article
- A1
- open access
Early structural build-up, setting behavior, reaction kinetics and microstructure of sodium silicate-activated slag mixtures with different retarder chemicals
-
Shape stability of 3D printable concrete with river and manufactured sand characterized by squeeze flow
-
- Journal Article
- A1
- open access
Early age reaction, rheological properties and pore solution chemistry of NaOH-activated slag mixtures
-
- Journal Article
- A1
- open access
Degradation of concrete in marine environment under coupled chloride and sulfate attack : a numerical and experimental study
-
A review : reaction mechanism and strength of slag and fly ash-based alkali-activated materials
-
The production of a topology-optimized 3D-printed concrete bridge
-
A mix design methodology of slag and fly ash-based alkali-activated paste
-
Rheology of alkali-activated slag pastes : new insight from microstructural investigations by cryo-SEM
-
Transport properties of 3D printed cementitious materials with prolonged time gap between successive layers
-
Mechanical and microstructural properties of 3D printable concrete in the context of the twin-pipe pumping strategy
-
Performance criteria, environmental impact and cost assessment for 3D printable concrete mixtures
-
- Journal Article
- A1
- open access
Magneto-rheology control in 3D concrete printing : a rheological attempt
-
3D printable concrete with natural and recycled coarse aggregates : rheological, mechanical and shrinkage behaviour
-
Understanding the Structural Build-Up Rate of Cementitious Materials for 3D-Printing
-
Drying shrinkage and swelling of 3D printed concrete stay-in-place formwork
-
Influence of accelerator on the pore structure of 3D printable concrete
-
- Journal Article
- A1
- open access
Adhesion properties of printable polymer-modified concrete for rock tunnel linings
-
- Journal Article
- A1
- open access
Rheology, early-age hydration and microstructure of alkali-activated GGBFS-Fly ash-limestone mixtures
-
Experimental study on concurrent factors influencing the ITZ effect on mass transport in concrete
-
- Journal Article
- A1
- open access
Experimental investigation for modeling the hardening of thermosetting polymers during curing
-
- Journal Article
- A1
- open access
Numerical reliability study based on rheological input for Bingham paste pumping using a finite volume approach in OpenFoam
-
- Journal Article
- A1
- open access
Effect of Ca(OH)(2) addition on the engineering properties of sodium sulfate activated slag
-
- Journal Article
- A1
- open access
Development of 3D printable cementitious composites with the incorporation of polypropylene fibers
-
The improvement of freezing-thawing resistance of concrete by cellulose/polyvinyl alcohol hydrogel
-
Prediction of compressive strength of concrete with manufactured sand by ensemble classification and regression tree method
-
Plastic viscosity of cement mortar with manufactured sand as influenced by geometric features and particle size
-
- Journal Article
- A1
- open access
Active stiffening control by magnetically induced blocking in confined flow of fly ash pastes
-
- Journal Article
- A1
- open access
Flow behavior of cementitious-like suspension with nano-Fe3O4 particles under external magnetic field
-
- Journal Article
- A1
- open access
Possibilities of fly ash as responsive additive in magneto-rheology control of cementitious materials
-
Enhancing thixotropy and structural build-up of alkali-activated slag/fly ash pastes with nano clay
-
- Journal Article
- A1
- open access
Thixotropic structural build-up of cement-based materials : a state-of-the-art review
-
- Journal Article
- A1
- open access
3D microstructure simulation of reactive aggregate in concrete from 2D images as the basis for ASR simulation
-
- Conference Paper
- C3
- open access
3DXRD : a novel application for characterization of ice crystallization in pores
-
- Journal Article
- A1
- open access
Rheological behavior of cement paste with nano-Fe3O4 under magnetic field : magneto-rheological responses and conceptual calculations
-
Determination of specific surface area of irregular aggregate by random sectioning and its comparison with conventional methods
-
- Journal Article
- A1
- open access
Structural evolution of cement paste with nano-Fe3O4 under magnetic field : effect of concentration and particle size of nano-Fe3O4
-
Stiffening control of cement-based materials using accelerators in inline mixing processes : possibilities and challenges
-
Early age shrinkage phenomena of 3D printed cementitious materials with superabsorbent polymers
-
Simulation of fibre orientation in self-compacting concrete : case studies
-
Quantitative evaluation of interfacial transition zone of sustainable concrete with recycled and steel slag as aggregate
-
Early age hydration, rheology and pumping characteristics of CSA cement-based 3D printable concrete
-
- Journal Article
- A1
- open access
Quantitative assessment of the influence of external magnetic field on clustering of nano-Fe3O4 particles in cementitious paste
-
Extrusion-based concrete 3D printing from a material perspective : a state-of-the-art review
-
Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content
-
Predicting the rheological behavior of hydrating cement systems
-
Chloride-indringing 3D-geprint beton : onderzoek naar de invloed van de laagopbouw op chloride-indringing en levensduur
-
- Conference Paper
- C3
- open access
Predicting the rheological behavior of hydrating cement systems
-
3D concrete printing on site : a novel way of building houses?
-
Printed concrete as formwork material : a preliminary study
-
3D printing of concrete : the influence on chloride penetration
-
Effect of limestone powder substitution on fresh and hardened properties of 3D printable mortar
-
Effects of activator properties and GGBFS/FA ratio on the structural build-up and rheology of AAC
-
- Journal Article
- A1
- open access
Rheological properties of cement paste with nano-Fe3O4 under magnetic field : flow curve and nanoparticle agglomeration
-
- Journal Article
- A1
- open access
Insights in thixotropic concrete pumping by a Poiseuille flow extension
-
Role of ITZ in the degradation process of blended cement concrete under magnesium sulfate attack
-
Influence of water to binder ratio on the rheology and structural build-up of alkali-activated slag/fly ash mixtures
-
Neutron radiography to study the water ingress via the interlayer of 3D printed cementitious materials for continuous layering
-
Freeze-thaw weathering : digging deeper in the temperature and length evolution of natural stones
-
Evaluating the influence of aggregate content on pumpability of 3D printable concrete
-
Investigation on influential factors on chloride concentration index of cement-based materials by pore solution expression method
-
Changes of pore structure and chloride content in cement pastes after pore solution expression
-
AC impedance spectroscopy characteristics of chloride-exposed cement pastes
-
Monitoring early-age acoustic emission of cement paste and fly ash paste
-
The role of ink-bottle pores in freeze-thaw damage of oolithic limestone
-
A review on freeze-thaw action and weathering of rocks
-
Experimental study of formwork tightness as a function of rheological properties of SCC
-
Structural build-up of cementitious paste under external magnetic fields
-
- Journal Article
- A2
- open access
Surface modification as a technique to improve inter-layer bonding strength in 3D printed cementitious materials
-
- Journal Article
- A1
- open access
Supported ITZ modification efficiencies via surface coating nanoparticles on aggregate and its influence on properties
-
Surface modification as a technique to improve interlayer bonding strength in 3D printed cementitious materials
-
Introduction of a multi-scale chemo-physical simulation model of ASR
-
Characterization of curing of concrete based on combination of NDT techniques
-
The real world of physical attack on concrete
-
Neutron radiography to study water ingress via the interlayer of 3D printed cementitious materials
-
Rheological characterization of the viscoelastic solid-like properties of fresh cement pastes with nanoclay addition
-
Insights and issues on the correlation between diffusion and microstructure of saturated cement pastes
-
Investigation on the potential utilization of zeolite as an internal curing agent for autogenous shrinkage mitigation and the effect of modification
-
Digital image correlation (DIC) on fresh cement mortar to quantify settlement and shrinkage
-
- Journal Article
- A1
- open access
Full-field settlement measurement at fresh cementitious material by digital image correlation
-
Utilization of miscanthus combustion ash as internal curing agent in cement-based materials : effect on autogenous shrinkage
-
Multi-level diffusion model for manufactured sand mortar considering particle shape and limestone powder effects
-
A review on microstructural characterization of cement-based materials by AC impedance spectroscopy
-
Characterization of cogeneration generated Napier grass ash and its potential use as SCMs
-
Effects of applied voltage on chloride binding and microstructure of cement pastes subjected to chloride solutions
-
Influence of nano-clay on rheology, fresh properties, heat of hydration and strength of cement-based mortars
-
A study on the chloride diffusion behavior of blended cement concrete in relation to aggregate and ITZ
-
Combination of Portland cement and calcium-sulfoAluminate cement : the highroad for durable 3D printing ?
-
Stiffening control of printable cement paste with flash setting admixture
-
Rheological measurements of printable mortars containing calcium sulfoaluminate cement
-
Introduction to the concept of active rheology control in case of pumping of cementitious materials
-
Fresh concrete pumping arrest investigation for thixotropy by a CFD modelling apporach
-
- Journal Article
- A1
- open access
Microstructural characterization of 3D printed cementitious materials
-
- Journal Article
- A1
- open access
Structural build-up of cementitious paste with nano-Fe3O4 under time-varying magnetic fields
-
- Conference Paper
- C3
- open access
Freeze-thaw weathering : visualizing water and ice distributions on the pore-scale
-
- Journal Article
- A1
- open access
Structure-property relationships for polycarboxylate ether superplasticizers by means of RAFT polymerization
-
- Conference Paper
- C3
- open access
Freeze-thaw fracturing in porous limestone
-
The effect of print parameters on the (Micro) structure of 3D printed cementitious materials
-
Uniaxial compressive strength measurements of limestone plugs and cores : a size comparison and X-ray CT study
-
Evaluation of the chloride migration and carbonation coefficients of Belgian ready mixed and precast concrete for a performance-based design
-
Effects of rotational shearing on rheological behavior of fresh mortar with short glass fiber
-
- Conference Paper
- C1
- open access
Application of digital image correlation to cement paste
-
Betonconstructies ontwerpen op levensduur
-
Zelfverdichtend beton
-
Samenstelling
-
Duurzaamheid
-
Betonspecie en verhardend beton
-
Evaluation and practical implementation of probabilistic calculations of chloride penetration for belgian concretes in the framework of a durable design
-
Smart casting of concrete structures by active rheology and stiffening control (ERC advanced grant project)
-
Proceedings of the Symposium on Concrete Modelling, CONMOD2018
-
Using chemical model system to simulate alkali-silica reaction : why and how
-
Thermal curing and environmental impact of alkali-activated cementitious materials
-
Monitoring fresh cementitious material by digital image correlation (DIC)
-
Fresh concrete monitoring by NDT techniques
-
- Conference Paper
- C1
- open access
Monitoring of fresh concrete curing by combined NDT techniques
-
Degradation mechanism of cement-emulsilfied asphalt mortar in high speed ballestless railway
-
A method to quantify the safety appraisal rating of masonry structures
-
Assessment of fresh cement-based materials by acoustic emission
-
- Journal Article
- A1
- open access
Time evolution of rheology of cement pastes affected by mixture design and mixing procedure
-
Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)
-
Vision of 3D printing with concrete : technical, economic and environmental potentials
-
- Journal Article
- A1
- open access
Different effects of NSF and PCE superplasticizer on adsorption, dynamic yield stress and thixotropy of cement pastes
-
Effective diffusivity of cement pastes from virtual microstructures : role of gel porosity and capillary pore percolation
-
A three-dimensional lattice Boltzmann method based reactive transport model to simulate changes in cement paste microstructure due to calcium leaching
-
Influences of chloride immersion on zeta potential and chloride concentration index of cement-based materials
-
Study on mechanical acoustic emission sources in fresh concrete
-
CFD implementation of time-dependent behaviour : application for concrete pumping
(2018) Proceedings of the Symposium on Concrete Modelling, CONMOD2018. In RILEM proceedings 127. p.122-130 -
Rheological behavior of cement paste under magnetic field
(2018) -
- Conference Paper
- C1
- open access
Effects of external magnetic field on structural evolution of cement paste with nano-Fe3O4
-
Active control of properties of concrete : a (p)review
-
Damage evolution of blended cement concrete under sodium sulfate attack in relation to ITZ volume content
-
- Conference Paper
- C3
- open access
Using µCT to investigate water migration during freeze-thaw experiments
-
Mix design factors of self-consolidating cement paste affecting the magnitude of variations in rheological properties induced by the addition time of PCE-superplasticizer
-
Effect of polycarboxylate ether superplasticizer (PCE) on dynamic yield stress, thixotropy and flocculation state of fresh cement pastes in consideration of the Critical Micelle Concentration (CMC)
-
Monitoring the hydration of cementitious material by acoustic emission
-
Monitoring Acoustic Emission of Fresh Cement Paste
-
- Conference Paper
- C1
- open access
Thixotropic effects during large-scale concrete pump tests on site
-
Assessing mortar extrudability through the Jolting Test
-
Interactions between cement and combined concrete admixtures
-
- Conference Paper
- C3
- open access
Robustness as a tool to improve the durability of self-compacting concrete
-
- Conference Paper
- C3
- open access
Sodium chloride ingress into OPC concrete subjected to compressive load
-
Acoustic emission monitoring of fresh cementitious material
-
- Conference Paper
- C1
- open access
Investigation of the deterioration of blended cement concrete under sulfate attack in terms of interfacial transition zone
-
- Conference Paper
- C1
- open access
Effects of chloride concentration on microstructure of cement pastes by AC impedance spectroscopy HU
-
- Conference Paper
- C1
- open access
Self-desiccation and self-desiccation shrinkage of silica fume-cement pastes
-
- Conference Paper
- C1
- open access
Studies on the evolution of alkali silicate in a simulated alkali-silica reaction system
-
- Conference Paper
- C1
- open access
Evaluation of the migration coefficient, diffusion coefficient and the ageing factor according to the chloride ingress model described in the fib bulletin 34 applied to Belgian concrete mixtures
-
- Conference Paper
- C1
- open access
Influence of concrete composition on chloride ingress and carbonation : analysis by means of an extended data-set
-
Casting concrete structures in a smarter way
-
Adjusting concrete rheology through mix design : short overview
-
In search of active rheology control of SCC
-
Casting concrete structures in a smarter way
-
3D printing of cementitious materials
-
Numerical approach for thixotropic behaviour of concrete : current status
-
Numerical approach for thixotropic behaviour of concrete : current status
-
Thixotropic effects during large-scale concrete pump test on site
-
Adjusting concrete rheology through mix design : short overview
-
3D printing of cementitious materials
-
- Conference Paper
- C1
- open access
Consequences of an adjusted slip layer thickness for the hardened properties of UHPC
-
- Conference Paper
- C1
- open access
Early-age monitoring of fresh cementitious material by acoustic emission
-
- Conference Paper
- C1
- open access
Evaluation of the restrained shrinkage cracking potential of self compacting concrete for modulus for radioactive waste disposal
-
Determination of packing profiles for the verification of the compressible packing model in case of UHPC pastes
-
Drying shinkage and cracking resistance of concrete made with ternary cementitious components
-
- Journal Article
- A2
- open access
Generalised fracture mechanics approach to the interfacial failure analysis of a bonded steel-concrete joint
-
Effect of the mix design on the robustness of fresh self-compacting concrete
-
XIV DBMC 14th International Conference on Durability of Building Materials and Components
Geert De Schutter (UGent) , Nele De Belie (UGent) , Arnold Janssens (UGent) and Nathan Van Den Bossche (UGent) -
Micro-scale freeze-thaw experiments in rocks: non-destructive visualization using X-ray CT
-
- Conference Paper
- C3
- open access
Real time 3D monitoring of frost damage in porous building materials
-
- Conference Paper
- C3
- open access
Dynamic X-ray CT to monitor water distribution within porous building materials: a build-up towards frost-related experiments
-
Carbonation reaction and microstructural changes of metro-tunnel segment concrete coupled with static and fatigue load
-
Effects of chloride Ion binding on microstructure of cement pastes
-
- Conference Paper
- P1
- open access
Experimental determination of chloride penetration in concrete with real cracks
-
- Conference Paper
- C3
- open access
Ice crystallization in porous building materials : assessing damage using real-time 3D monitoring
-
- Conference Paper
- C1
- open access
Optimization of concrete for prefabrication and quantification of its environmental impact
-
Acoustic emission monitoring of fresh cementitious material
-
Continuous AE monitoring of fresh concrete
-
Can a reliable prediction of cement paste transport properties be made using microstructure models?
-
Bending fatigue of reinforced self-compacting concrete beams
-
Fatigue assessment of a lightweight steel-concrete bridge deck concept
-
Hydration of ternary blended cement paste
-
Reduction of the environmental impact : effect of the mix design of self-compacting concrete
-
Pumping of fresh concrete : insights and challenges
-
The quest for absolute concrete durability performance criteria
-
Real case : assessing sulfate resistance of coastal protection precast elements
-
Effect of limestone fillers on ca-leaching and carbonation of cement pastes
-
- Journal Article
- A2
- open access
Experimental and numerical investigations of the influence of real cracks on chloride ingress in concrete
-
- Conference Paper
- C1
- open access
Design considerations and sustainability of self-compacting concrete
-
- Conference Paper
- C1
- open access
Hardening self-compacing mortar expsoed to gamma radiation
-
- Conference Paper
- C1
- open access
Investigation on the mechanisms govergning the robustness of self-compacting concrete at paste level
-
- Conference Paper
- C1
- open access
A review on microstructure characterization of cement-based materials subjected to chloride by AC Impedance
-
Effects of crack and ITZ and aggregate on carbonation penetration based on 3D micro X-ray CT microstructure evolution