prof. dr. ir. Kim Verbeken
- ORCID iD
- 0000-0002-5190-016X
Show
Sort by
-
The effect of hydrogen and notch orientation in SENT specimens on the fracture toughness of an API 5L X70 pipeline steel
-
- Conference Paper
- C1
- open access
Hydrogen interaction with FCC CoCrFeMnNi high entropy alloy
-
- Conference Paper
- C1
- open access
Damage evolution of a hydrogen charged grade X56 pipeline steel evaluated using X-ray micro-CT
-
- Conference Paper
- C1
- open access
Study of hydrogen trapping at carbides after gaseous charging at elevated temperatures
-
- Conference Paper
- C1
- open access
Hydrogen-assisted degradation of an X70 pipeline steel evaluated by single edge notched tension testing
-
Multiscale evaluation of hydrogen-assisted mechanical degradation in grade 2 titanium
-
Modeling the effect of grain boundary diffusivity and trapping on hydrogen transport using a phase-field compatible formulation
-
- Journal Article
- open access
An Experimental Investigation on the Relation between Corrosion and Thermohydraulic Behavior in Heat Exchangers for Geothermal Applications
-
Characterisation of hydride formation in as-built and heat treated laser powder bed fused Ti-6Al-4V
-
- Journal Article
- A1
- open access
On the potential correlation between dynamic strain aging and liquid metal embrittlement in T91/LBE system
-
The effect of coolant additives on the vapour explosion behaviour in melt droplet impingement experiments
-
Internal friction study of hydrogen interactions in duplex stainless steel
(2023) -
A mechanistic interpretation for the initiation and propagation of hydrogen induced and assisted cracks
(2023) -
In-situ microcantilever bending of titanium revealing hydrogen-dislocation interactions
(2023) -
Hydrogen embrittlement of an X70 pipeline steel assessed by slow strain rate tensile tests
-
Fractographic study for screening the hydrogen compatibility of X70 pipeline steels and welds
-
Current status of hydrogen trapping evaluation by thermal desorption spectroscopy and advanced microstructural characterization
-
- Conference Paper
- C3
- open access
Increasing the resistance to hydrogen embrittlement of martensitic medium carbon steels
-
- Conference Paper
- C3
- open access
Hydrogen-assisted degradation of an X70 pipeline steel evaluated by single edge notched tension testing
-
- Conference Paper
- C3
- open access
Hydrogen interaction with an equiatomic CoCrFeMnNi high entropy alloy
-
- Conference Paper
- C3
- open access
Study of hydrogen trapping at carbides after gaseous charging at elevated temperatures and its impact on mechanical properties
-
- Journal Article
- A1
- open access
Short term fouling tests on homogeneous and heterogeneous anion-exchange membranes from food and bio-based industrial streams : foulant identification and characterization
-
Investigating the role of pH on the corrosion rate of construction steel in artificial seawater
-
Physical slag properties via a combined experimental–modelling approach
-
Electrochemical investigation on the corrosion inhibition of a silicate–alginate blend in a dynamic aqueous chlorine environment
(2023) -
Fractographic study of quasi-static tensile tested, electrochemically hydrogen charged X70 pipeline steels
-
- Journal Article
- A1
- open access
Confirming debonding of non-metallic inclusions as an important factor in damage initiation in bearing steel
-
In-situ hydrogen embrittlement evaluation of as-built and heat treated laser powder bed fused Ti-6Al-4V versus conventionally cold rolled Ti-6Al-4V
-
- Journal Article
- A1
- open access
Effect of microstructure on the hydrogen embrittlement, diffusion, and uptake of dual-phase low alloy steels with varying ferrite-martensite ratios
-
Effect of stress triaxiality on the hydrogen embrittlement micromechanisms in a pipeline steel evaluated by fractographic analysis
-
Towards circularity in steel industry : a joint journey between industry and universities along multiple TRL levels
-
Investigation of the influence of Nb addition on the corrosion product formation and hydrogen uptake of tempered martensitic steel in H2S environment
-
The effect of calcareous deposits on the hydrogen diffusion and uptake of carbon steel evaluated by permeation experiments
-
Corrosion in geothermal brine : the role of temperature and flow
-
Effect of hydrogen on nanoindentation behavior of heat treated selective laser melted 316L stainless steel
-
- Journal Article
- A1
- open access
Viscosity experiments of slag-spinel suspensions : the effect of volume fraction, particle size, and shear rate
-
- Journal Article
- A1
- open access
Parameter investigation of the experimental methodology of electrical conductivity measurements for PbO containing slags
-
Modeling of Hydrogen-Charged Notched Tensile Tests of an X70 Pipeline Steel with a Hydrogen-Informed Gurson Model
(2023) -
- Journal Article
- A1
- open access
Modeling of hydrogen-charged notched tensile tests of an X70 pipeline steel with a hydrogen-informed Gurson model
-
Viscosity measurements during continuous cooling of a lead silicate slag
-
Electrical conductivity measurements in PbO-SiO2-FeOx slags
-
Industrial aspects of freeze lining operations in pyrometallurgy
-
- Journal Article
- A1
- open access
Effect of additive manufacturing and subsequent heat and/or surface treatment on the hydrogen embrittlement sensitivity of 316L austenitic stainless steel
-
- Journal Article
- A1
- open access
Scanning Kelvin probe force microscopy study of the effect of thermal oxide layers on the hydrogen release : experiments and finite element method modelling
-
- Conference Paper
- C3
- open access
The hydrogenation mechanism of L-PBF Ti-6Al-4V with different building orientation and surface finish
-
- Conference Paper
- C3
- open access
Improved hydrogen resistance for high-strength fastener steels
-
- Conference Paper
- C3
- open access
The potential of thermal desorption spectroscopy to determine the hydrogen trapping characteristics
-
- Conference Paper
- C3
- open access
Mesoscale modeling of the role of grain boundaries in hydrogen transport
-
Effect of hydrogen on macro/nano mechanical behavior of additive manufactured 316L stainless steel
-
Microstructural and fractographic investigation of hydrogen embrittlement sensitivity of X70 pipeline steels
-
Microstructure dependent hydrogen embrittlement in Ti-6Al-4V : an in-situ comparison between the as-built, heat treated laser powder bed fused and conventionally cold rolled alloy
-
- Journal Article
- A1
- open access
Hydrogen trapping of carbides during high temperature gaseous hydrogenation
-
- Journal Article
- A1
- open access
The mechanism behind the effect of building orientation and surface roughness on hydrogen embrittlement of laser powder bed fused Ti-6Al-4V
-
- Journal Article
- A1
- open access
Evaluation of microstructural and environmental effects on the hydrogen uptake and desorption in high-strength carbon steels : a thermal desorption spectroscopy study
-
Methodology of the electrochemical hydrogen permeation test : a parametric evaluation
-
- Journal Article
- A1
- open access
The influence of melt composition, liquidus temperature and solidus temperature on vapour explosions in melt droplet impingement experiments
-
- Journal Article
- A1
- open access
Combined gold recovery and nanoparticle synthesis in microbial systems using fractional factorial design
-
- Journal Article
- A1
- open access
Sodium silicate corrosion inhibition behaviour for carbon steel in a dynamic salt water environment
-
- Journal Article
- A1
- open access
The mechanism of hydride formation during electrochemical hydrogen charging of Ti-6Al-4V
-
Evaluation of the responsible hydrogen embrittlement mechanism in martensitic steels by advanced microstructural characterization
-
- Journal Article
- A1
- open access
Role of cementite morphology on corrosion layer formation of high-strength carbon steels in sweet and sour environments
-
- Journal Article
- A1
- open access
A combined numerical‐experimental approach for the critical hydrogen diffusion depth in steel
-
- Journal Article
- A1
- open access
Uncovering the white etching area and crack formation mechanism in bearing steel
-
- Journal Article
- A1
- open access
Influence of stress triaxiality on hydrogen assisted ductile damage in an X70 pipeline steel
-
- Journal Article
- A1
- open access
Mechanical load induced hydrogen charging of retained austenite in quenching and partitioning (Q&P) steel
-
- Journal Article
- A1
- open access
The influence of H-2 partial pressure on biogenic palladium nanoparticle production assessed by single-cell ICP-mass spectrometry
-
Pipelines distribution : factors affecting material degradation during gaseous hydrogen transport
-
Methodological investigation of a four electrode electrical conductivity set-up in a binary SiO2-PbO system
-
Influence of stress triaxiality on hydrogen assisted ductile damage in an X70 pipeline steel
(2022) -
- Journal Article
- A1
- open access
Influence of thermal oxide layers on the hydrogen transport through the surface of SAE 1010 steel
-
- Journal Article
- A1
- open access
Effect of intercritical temperature on the microstructure and mechanical properties of a ferritic–martensitic dual-phase low-alloy steel with varying nickel content
-
- Conference Paper
- C1
- open access
Corrosion of austenitic stainless steels and nickel-based alloys in concentrated phosphoric acid at elevated temperatures
-
- Conference Paper
- C1
- open access
Effect of hydrogen charging on Charpy impact toughness of an X70 pipeline steel
-
- Conference Paper
- C1
- open access
The interaction of hydrogen with retained austenite in automotive steel grades
-
- Conference Paper
- C1
- open access
Comparison between the hydrogen embrittlement behavior of an industrial and a lightweight bearing steel
-
- Conference Paper
- C1
- open access
The interaction of hydrogen with microstructural defects studied by internal friction
-
- Conference Paper
- C1
- open access
Influence of hydrogen on deformation and fracture mechanisms in austenitic steel types
-
- Conference Paper
- C3
- open access
Sustainable corrosion inhibition of carbon steel with sodium silicate
-
- Conference Paper
- C3
- open access
Hydrogen embrittlement in pipeline steels and welds
-
- Conference Paper
- C3
- open access
Characterization of hydrogen-assisted degradation of a vintage and a modern pipeline steel
-
- Conference Paper
- C3
- open access
Electrical conductivity measurements for improved metal recycling efficiency
-
The effect of Nb on the hydrogen embrittlement susceptibility of Q&P steel under static and dynamic loading
-
The role of carbon distribution in ultra-low carbon steel on the hydrogen trapping characteristics
-
Hydrogen embrittlement in conventional versus additive manufactured 316L austenitic stainless steel
-
Hydrogen trapping at retained austenite evaluated in Quenching & Partitioning (Q&P) steel : part I: experimental results
-
Effect of nickel on the hydrogen embrittlement, diffusion, and trapping properties of ferritic-martensitic dual-phase low alloy steel in tempered condition
-
Hydrogen trapping at retained austenite evaluated in Quenched & Partitioning (Q&P) steel : part II : simulation results
-
Characterization of hydrogen-assisted degradation of a vintage and a modern pipeline steel
-
Comparison of hydrogen embrittlement in conventionally cold rolled Ti-6Al-4V versus additive manufactured Ti-6Al-4V
-
Effect of solids on the rheology of a secondary copper smelting slag
-
Effect of solids on the rheology of a secondary copper smelting slag
-
Methodological investigation of a four electrode electrical conductivity set-up in a binary SiO2-PbO system
-
- Journal Article
- A1
- open access
The effect of vapour formation and metal droplet temperature and mass on vapour explosion behaviour
-
Interaction between hydrogen and martensitic Fe-(Al)-C steels : the beneficial role of an Al-induced ferritic microfilm
-
- Conference Paper
- C1
- open access
Single edge notched tension testing for assessing hydrogen embrittlement : a numerical study of test parameter influences
-
Towards a better understanding of hydrogen embrittlement in austenitic steels : the role of hydrogen characteristics and fracture mechanisms
-
- Conference Paper
- C3
- open access
Evaluation of butterfly wing formation in bearing steel : the role of non-metallic inclusions and hydrogen
-
The role of cementite on the hydrogen embrittlement mechanism in martensitic medium-carbon steels
-
Comparison of hydrogen embrittlement in laser powder bed fused versus conventionally rolled Ti-6Al-4V
-
Dynamic corrosion inhibitor efficiency testing for sodium silicate
-
The effect of aluminum on the resistance to hydrogen embrittlement of martensitic steels for bearing applications
-
The role of retained austenite in the hydrogen embrittlement of quenching and partitioning (Q&P) steels
-
Initiation of hydrogen induced cracks by electrochemical hydrogen charging revealed for multiple steel grades
-
On the role of stacking fault energy in the hydrogen embrittlement sensitivity of twinning induced plasticity (TWIP) steel
-
A combined thermal desorption spectroscopy and internal friction study on the interaction of hydrogen with microstructural defects and the influence of carbon distribution
-
- Conference Paper
- C3
- open access
Effect of hydrogen charging on Charpy impact toughness of two pipeline steels
-
The effect of an Al-induced ferritic microfilm on the hydrogen embrittlement mechanism in martensitic steels
-
On the role of the stacking fault energy in the beneficial effect of aluminium on the hydrogen embrittlement sensitivity of twinning-induced plasticity (TWIP) steel
-
The role of an AI-induced ferritic microfilm in martensitic steels on the hydrogen embrittlement mechanisms revealed by advanced microscopic characterization
-
- Journal Article
- A1
- open access
Stress corrosion cracking of steam turbine steel : the influence of organic acid characteristics
-
- Conference Paper
- C3
- open access
The interaction of hydrogen with microstructural defects studied by internal friction
-
- Conference Paper
- C3
- open access
Corrosion of austenitic stainless steels and nickel-based alloys in concentrated phosphoric acid at elevated temperatures
-
- Conference Paper
- C3
- open access
The interaction of hydrogen with retained austenite in quenching and partitioning (Q&P) and transformation induced plasticity (TRIP) steel
-
- Conference Paper
- C3
- open access
Hydrogen increased ductility due to martensitic transformation versus hydrogen embrittlement in 304L stainless steel : the role of the deformation rate
-
- Conference Paper
- C3
- open access
Hydrogen trapping and embrittlement revealed in martensitic Fe-xAl-yC steels
-
- Journal Article
- A1
- open access
Towards more realistic simulations of microstructural evolution in oxidic systems
-
Evaluating the interaction of hydrogen with the materials’ microstructure by advanced characterization
-
Gaseous hydrogen transport in existing pipelines : a review of factors affecting material degradation
-
Influence of electrochemical hydrogenation parameters on microstructures prone to hydrogen-induced cracking
-
Use of existing steel pipeline infrastructure for gaseous hydrogen storage and transport : a review of factors affecting hydrogen induced degradation
-
- Journal Article
- A1
- open access
Fundamental and formation aspects of slag freeze linings : a review
-
The addition of aluminum to brittle martensitic steels in order to increase ductility by forming a grain boundary ferritic microfilm
-
Hydrogen stress cracking resistance and hydrogen transport properties of ASTM A508 grade 4N
-
Investigation of the effect of carbon on the reversible hydrogen trapping behavior in lab-cast martensitic Fe-C steels
-
The effect of quench cracks and retained austenite on the hydrogen trapping capacity of high carbon martensitic steels
-
- Journal Article
- A1
- open access
Effect of phosphine on coke formation during steam cracking of propane
-
- Journal Article
- A1
- open access
Towards more reliable PbO-SiO2 based slag viscosity measurements in alumina via a dense intermediate spinel layer
-
Development of sub-miniaturized testing for W/Cu joints extracted from the ITER-specification monoblock
-
- Journal Article
- A1
- open access
Critical verification of the Kissinger theory to evaluate thermal desorption spectra
-
- Conference Paper
- C1
- open access
Use of additive manufactured components in hydrogen applications : impact of heat treatment and surface condition on hydrogen embrittlement sensitivity of AM 316L
-
- Conference Paper
- C1
- open access
The effect of Nb on the high strain rate hydrogen embrittlement of Q&P steel
-
The effect of hydrogen on the strain induced phase transformation of austenite in automotive quenching and partitioning steel
-
Vapor explosions : modeling and experimental analysis in both small- and large-scale setups : a review
-
Lead silicate slag viscosity measurements : inert vs. non-inert measurement materials
-
The importance of heat transfer in the phenomenon of vapour explosions
-
Freeze lining operations in pyrometallurgical industries
-
Experimental investigation of the oxidation kinetics of molten lead silicate slags
-
An experimental investigation of vapour explosions by droplet impingement of aluminium in water
-
Assessment of the application possibilities of foaming index on industrial BOF process data
-
Towards more realistic simulations of microstructural evolution in oxidic systems
-
- Journal Article
- A1
- open access
Determination of the Fe3+/ΣFe ratio in synthetic lead silicate slags using X-band CW-EPR
-
The role of hydrogen in environment-assisted cracking of Ti-6Al-4V
-
Hydrogen diffusion in metals : a topic requiring specific attention from the experimentalist
-
- Journal Article
- A2
- open access
Hydrogen interaction in ultrafine grain duplex stainless steel 2205 aged after cold rolling
-
- Conference Paper
- C3
- open access
Impact of hydrogen on mechanical properties of 304L stainless steel
-
- Conference Paper
- C3
- open access
Hydrogen induced degradation of an X70 pipeline steel
-
- Conference Paper
- C3
- open access
Qualification of the in-situ bending technique towards the evaluation of the hydrogen induced fracture mechanism of martensitic Fe-C steels
-
- Conference Paper
- C3
- open access
Hydrogen assisted mechanical degradation of Ti-6Al-4V
-
Evaluating the hydrogen embrittlement susceptibility of aged 2205 duplex stainless steel containing brittle sigma phase
-
The effect of quench cracks and retained austenite on the hydrogen trapping capacity of high carbon martensitic steels
-
The potential of the internal friction technique to evaluate the role of vacancies and dislocations in the hydrogen embrittlement of steels
-
An interdisciplinary framework to predict premature roller element bearing failures in wind turbine gearboxes
-
The key role of dedicated experimental methodologies in revealing the interaction between hydrogen and the steel microstructure
-
Impact of hydrogen and crosshead displacement rate on the martensitic transformations and mechanical properties of 304L stainless steel
-
Assessment of the hydrogen interaction on the mechanical integrity of a welded martensitic steel
-
Mechanistic interpretation on acidic stress-corrosion cracking of NiCrMoV steam turbine steel
-
Critical assessment of the applicability of the foaming index to the industrial basic oxygen steelmaking process
-
- Journal Article
- A1
- open access
Heat transfer considerations on the spontaneous triggering of vapor explosions : a review
-
- Journal Article
- A1
- open access
Effect of speciation and composition on the kinetics and precipitation of arsenic sulfide from industrial metallurgical wastewater
-
Combinatorial effects of coral addition and plasma treatment on the properties of chitosan/polyethylene oxide nanofibers intended for bone tissue engineering
-
Influence of displacement rate and temperature on the severity of liquid metal embrittlement of T91 steel in LBE
-
Three mechanisms of hydrogen-induced dislocation pinning in tungsten
-
- Conference Paper
- C3
- open access
Numerical studies to investigate the effect of inclusion-matrix debonding on subsurface crack initiation due to rolling contact fatigue in bearings
-
Fracture behavior of tungsten-based composites exposed to steady-state/transient hydrogen plasma
-
- Conference Paper
- P1
- open access
Calibrating a ductile damage model for two pipeline steels : method and challenges
(2020) 1st Virtual European Conference On Fracture - VECF1. In Procedia Structural Integrity 28. p.2267-2276 -
- Journal Article
- A1
- open access
Effect of film-forming amines on the acidic stress-corrosion cracking resistance of steam turbine steel
-
- Conference Paper
- C3
- open access
Combined XPEEM and STXM study of coke formation on high temperature Al-containing alloys during steam cracking of ethane
-
- Conference Paper
- C3
- open access
Thermodynamic modelling of the BOF process with Chemapp : progress and future work
-
- Conference Paper
- C1
- open access
Economic optimization of heat exchangers for corrosive environments
-
- Journal Article
- A1
- open access
Catalytic effect of dimethyl disulfide on coke formation on high-temperature alloys : myth or reality?
-
The interaction between hydrogen and quench cracks in high carbon martensitic steels revealed by thermal desorption spectroscopy and hot/melt extraction
-
The impact of different organic acids on the stress-corrosion cracking sensitivity of steam turbine steel
-
Hydrogen-assisted cracking in 2205 duplex stainless steel : initiation, propagation and interaction with deformation-induced martensite
-
Thermal desorption spectroscopy evaluation of hydrogen-induced damage and deformation-induced defects
-
The effect of hydrogen on the crack initiation site of TRIP-assisted steels during in-situ hydrogen plasma micro-tensile testing : leading to an improved ductility?
-
EBSD characterization of hydrogen induced blisters and internal cracks in TRIP-assisted steel
-
Qualification of the in-situ bending technique towards the evaluation of the hydrogen induced fracture mechanism of martensitic Fe–C steels
-
Investigation of rolling contact fatigue crack initiation from non-metallic inclusions in bearings
-
Evaluation of the active mechanism for acidic SCC induced mechanical degradation : a methodological approach
-
- Journal Article
- A1
- open access
Fabrication of microporous coatings on titanium implants with improved mechanical, antibacterial and cell-interactive properties
-
EBSD characterization of pure and K-doped tungsten fibers annealed at different temperatures
-
- Journal Article
- A1
- open access
A comparison between chemical cleaning efficiency in lab-scale and full-scale reverse osmosis membranes : role of extracellular polymeric substances (EPS)
-
Quantification of the Fe3+ concentration in lead silicate glasses using X-band CW-EPR
-
- Journal Article
- A2
- open access
Initiation of hydrogen induced cracks at secondary phase particles
-
Microalgae : a sustainable adsorbent with high potential for upconcentration of indium(iii) from liquid process and waste streams
-
Mechanical degradation of Fe-C-X steels by acidic stress-corrosion cracking
-
Microstructural based hydrogen diffusion and trapping models applied to Fe-C-X alloys
-
- Conference Paper
- C3
- open access
Deposition of antibacterial Ag/a-C:H nanocomposites on titanium substrates using a gas aggregation cluster source
-
Critical assessment of the evaluation of thermal desorption spectroscopy data for duplex stainless steels : a combined experimental and numerical approach
-
The effect of a constant tensile load on the hydrogen diffusivity in dual phase steel by electrochemical permeation experiments
-
- Journal Article
- A2
- open access
The hydrogen embrittlement sensitivity of duplex stainless steel with different phase fractions evaluated by in-situ mechanical testing
-
Antibacterial activity of a porous silver doped TiO2 coating on titanium substrates synthesized by plasma electrolytic oxidation
-
- Conference Paper
- C1
- open access
Corrosion in heat exchangers in geothermal power plants
-
Evaluation of the interaction of hydrogen with a steel microstructure : key in the development of hydrogen resistant materials
-
Interação do hidrogênio no aço inoxidável duplex 2205 envelhecido após laminação a frio
-
Effect of the shear layer on the etching behavior of 6060 aluminum extrusion alloys
-
The effect of hydrostatic stress on the hydrogen induced mechanical degradation of dual phase steel : a combined experimental and numerical approach
-
Organic matter and microbial cell density behavior during ion exchange demineralization of surface water for boiler feedwater
-
- Conference Paper
- C3
- open access
Plasma-facing components for nuclear fusion reactors : keeping a star in a box
-
- Conference Paper
- C1
- open access
Evolution of microstructure, texture and grain boundary character distribution of potassium doped tungsten fibers annealed at variable temperatures
-
- Journal Article
- A1
- open access
Microstructural characterization and mechanical behavior during recrystallization annealing of Nb-stabilized type ASTM 430 and Nb-Ti-stabilized ASTM 439 ferritic stainless steels
-
Economic optimization of heat exchanger design for geothermal applications
-
Study of the antibacterial efficiency of Cu-doped TiO2 coatings produced by plasma electrolytic oxidation
-
On the origin of sudden slag foaming during copper smelting
-
Oxidic systems : a combined modelling and experimental approach
-
Macroscopic analysis of the reaction between molten copper and water : simulations and preliminary experiments
-
A combined interpretation of thermal desorption spectra of Fe-C-X alloys : part II - modeling approach
-
A combined interpretation of thermal desorption spectra of Fe-C-X alloys : part I - experimental approach
-
Methodological evaluation of hydrogen diffusion in steel by electrochemical permeation
-
Characterization of hydrogen induced blistering in TRIP-assisted steel
-
SCC of steam turbine steel in acidic aqueous environment
-
The effect of quench cracks on the interaction between hydrogen and martensitic steels
-
The effect of a constant tensile load on the hydrogen permeation characteristics in dual phase steel
-
The hydrogen trapping ability of Ti-based carbides in tempered martensitic steels evaluated by gaseous hydrogen charging at elevated temperature
-
The effect of strain rate on the interaction between hydrogen and deformation-induced martensite in 304 austenitic stainless steel
-
- Journal Article
- A1
- open access
Electrochemical hydrogen charging of duplex stainless steel
-
- Conference Paper
- C3
- open access
Interactive industrial application to represent isothermal sections of multi component phase diagram
-
Basic oxygen furnace : assessment of recent physicochemical models
-
Effect of annealing on microstructure, texture and hardness of ITERspecification tungsten analyzed by EBSD, Vickers micro-hardness and nano-indentation techniques
-
First observation by EBSD of martensitic transformations due to hydrogen presence during straining of duplex stainless steel
-
Electrochemical hydrogen charging to simulate hydrogen flaking in pressure vessel steels
-
Fouling-resistant PVDF nanofibre membranes for the desalination of brackish water in membrane distillation
-
Corrosion behaviour of different steel types in artificial geothermal fluids
-
- Conference Paper
- C3
- open access
EBSD analysis and hardness evaluation of ITER specification tungsten exposed at QSPA Kh-50
-
Characterization of HIC in generic Fe-C-Ti and Fe-C-V alloys
-
- Conference Paper
- C3
- open access
The effect of hydrogen on the properties of duplex stainless steel
-
Effect of hydrogen at dislocations on the hydrogen embrittlement degree of Fe-C-X alloys : an experimental proof of the HELP mechanism
-
Expanding the lifetime of materials: hydrogen/material interaction and corrosion research
-
- Conference Paper
- C3
- open access
Stress-corrosion cracking in acidic aqueous environment
-
Numerical interpretation to differentiate hydrogen trapping effects in iron alloys in the Devanathan-Stachurski permeation cell
-
Study of the hydrogen uptake in deformed steel using the microcapillary cell technique
-
Dialdehyde carboxymethyl cellulose cross-linked chitosan for the recovery of palladium and platinum from aqueous solution
-
Functionalized chitosan adsorbents allow recovery of palladium and platinum from acidic aqueous solutions
-
Effect of Zn on the grain boundary precipitates and resulting alkaline etching of recycled Al-Mg-Si-Cu alloys
-
Expanding the lifetime of materials : environmental sensitive cracking : hydrogen/material interaction
(2019) -
- Journal Article
- A1
- open access
Corrosion and corrosion prevention in heat exchangers
-
Assessment of the potential of hydrogen plasma charging as compared to conventional electrochemical hydrogen charging on dual phase steel
-
- Journal Article
- A1
- open access
Micromechanical and microstructural properties of tungsten fibers in the as-produced and annealed state : assessment of the potassium doping effect
-
Model-based interpretation of thermal desorption spectra of Fe-C-Ti alloys
-
- Journal Article
- A1
- open access
Secondary treated domestic wastewater in reverse electrodialysis : what is the best pre-treatment?
-
Effect of environmental and internal hydrogen on the hydrogen assisted cracking behavior of TRIP-assisted steel
-
Correlation of microstructural and mechanical properties of K-doped tungsten fibers used as reinforcement of tungsten matrix for high temperature applications
-
The hydrogen induced mechanical degradation of duplex stainless steel
-
Evaluation of the hydrogen embrittlement susceptibility in DP steel under static and dynamic tensile conditions
-
Nanoscale intergranular corrosion and relation with grain boundary character as studied in Situ on copper
-
Modelling of hydrogen permeation experiments in iron alloys : characterization of the accessible parameters : part II : the exit side
-
Modelling of hydrogen permeation experiments in iron alloys : characterization of the accessible parameters : part I : the entry side
-
Deformation induced degradation of hot-dip aluminized steel
-
Mechanical degradation of steam turbine steel due to stress-corrosion cracking in acidic water
-
Investigation of convertor slag properties and their influence on steel refining by means of thermodynamic modelling with Factsage and Chemapp
(2018)