prof. dr. ir. Michel De Paepe
Show
Sort by
-
Impact of different short-term thermal energy storage strategies on the performance of an inverter controlled air-to-water heat pump(IATWHP) in residential buildings in Belgium
-
- Conference Paper
- C1
- open access
Useful energy transfer in air-to-air heat recovery units in partly heated low energy buildings
-
Characteristics of a cooling unit with phase changing material combined with metal foam in a passive container prototype for pharmaceutical transport.
(2017) -
- Conference Paper
- C1
- open access
Charging of a thermal battery composed of open-cell metal foam and phase change material for use in pharmaceuticals transport
(2017) -
- Conference Paper
- C1
- open access
Parametric study of a triangular cross corrugated plate
-
- Conference Paper
- C1
- open access
A strategy for modelling typical indoor climates in historic buildings : moisture buffering of massive walls and stratification by heating
-
- Conference Paper
- P1
- open access
Employing a single-screw expander in an organic rankine cycle with liquid flooded expansion and internal regeneration
-
- Conference Paper
- P1
- open access
Computational models for the analysis of positive displacement machines : real gas and dynamic mesh
-
- Conference Paper
- P1
- open access
Non-symmetric approach to single-screw expander and compressor modeling
-
- Conference Paper
- C1
- open access
Local heat flux measurement technique for internal combustion engines
(2017) -
- Conference Paper
- C1
- open access
Simultaneous capacitive probe and planar laser-induced fluorescence measurements in downwards gas-liquid annular flow
-
Design sensitivity analysis of a plate-finned air-cooled condenser for low-temperature organic rankine cycles
-
Evaluation of empirical heat transfer models using TFG heat flux sensors
-
- Conference Paper
- C1
- open access
The distribution over an impacting T-junction of two-phase R32 under heat pump conditions
(2017) -
Studying the effect of the flame passage on the convective heat transfer in a S.I. engine
-
- Conference Paper
- C1
- open access
The distribution of two-phase R32 over an impacting T-junction
(2017) -
- Conference Paper
- C1
- open access
Determining heat losses in a reheat furnace : a case study
-
- Conference Paper
- C1
- open access
Design of an optical-access expansion chamber for two-phase expansion
-
- Conference Paper
- C1
- open access
Potential of Organic Rankine Cycles (ORC) for waste heat recovery on an Electric Arc Furnace (EAF)
-
- Conference Paper
- C1
- open access
Experimental investigation of a forced convection heat transfer of the organic fluid R-125 at supercritical pressures and under organic rankine cycle conditions
(2017) -
Experimental study of design parameter influence on thermal and hydraulic performance of cold plates
-
On the design and advantages of a vapor chamber for battery packs and the discrepancy in vertical channel boiling correlations at small gap spacing
-
Experimental assessment of plate fin heat sinks for thermoelectric generators
(2017) -
- Conference Paper
- P1
- open access
Thermoeconomic analysis of recuperative sub- and transcritical organic Rankine cycle systems
-
- Conference Paper
- P1
- open access
Initial design of an optical-access piston expansion chamber for wet-expansion
-
- Journal Article
- A1
- open access
Experimental assessment of a helical coil heat exchanger operating at subcritical and supercritical conditions in a small-scale solar organic rankine cycle
-
- Book
- open access
Duurzame ontwikkeling als een rode draad : opleidingen aan de Universiteit Gent in transitie
(2017) -
Plate fin heat sink modelling and design considerations for thermoelectric generators
-
Evaluation of the hygric properties of a wooden panel painting to perform HAM simulations
-
Evaluation of empirical heat transfer models for HCCI combustion in a CFR engine
-
- Journal Article
- A1
- open access
Discussion on the effect of a fluid domain around fins and grid discretization in buoyancy-driven convection
-
Optimizing the performance of small-scale organic Rankine cycle that utilizes a single-screw expander
-
An assessment of subcritical and supercritical organic rankine cycles for waste-heat recovery
(2017) 8TH INTERNATIONAL CONFERENCE ON APPLIED ENERGY (ICAE2016). In Energy Procedia 105. p.1870-1876 -
- Journal Article
- A1
- open access
Case study of an Organic Rankine Cycle (ORC) for waste heat recovery from an Electric Arc Furnace (EAF)
-
- Conference Paper
- C1
- open access
Thermal analysis of a plastic helical coil heat exchanger for a domestic water storage tank
-
Experimental investigation and modelling of the in-cylinder heat transfer during ringing combustion in an HCCI engine
-
- Journal Article
- A1
- open access
Performance evaluation of a helical coil heat exchanger working under supercritical conditions in a solar organic Rankine cycle installation
-
- Conference Paper
- C1
- open access
Experimental two-phase heat transfer study of R245fa in horizontal mini-channels at high saturation temperatures
-
Effect of the bend geometry on the two-phase frictional pressure drop and flow behaviour in the vicinity of the bend
-
- Journal Article
- A1
- open access
A discussion on the interpretation of the Darcy equation in case of open-cell metal foam based on numerical simulations
-
Modelling the heat transfer of HCCI engines
-
- Journal Article
- A1
- open access
Thermal analysis of a commercial plate fin heat exchanger with non-uniform inlet flow conditions
-
Optimal part-load operation of an 11 kWe organic Rankine cycle for waste heat recovery
-
How to perform numerical simulations on fins in buoyancy-driven heat transfer?
-
The effect of ringing combustion on the wall heat flux during HCCI operation
-
Thermal analysis of absorption heat pump implementation in an industrial dryer
-
Performance evaluation analysis of metal foam and flat tube heat exchangers for HVAC applications
-
- Conference Paper
- C1
- open access
Experimental investigation at sub- and supercritical conditions of a helical coil heat exchanger particularly designed for a small-scale solar ORC
(2016) -
Experimental investigation of a helical coil heat exchanger operating at sub- and supercritical state in a small-scale solar ORC installation
-
Simulations of absorption heat pump implementation in a drying system: an industrial case study
(2016) p.1-8 -
The influence of inclination angle on void fraction and heat transfer during condensation inside a smooth tube
-
Two-phase frictional pressure drop and flow behaviour up- and downstream of a sharp return bend
-
Experimental study of the effect of felt wick porosity on capillary-driven heat pipes
-
- Conference Paper
- C1
- open access
Organic rankine cycle modelling and the ORCmKit library: analysis of R1234ze(Z) as drop-in replacement of R245fa for low-grade waste heat recovery
-
- Conference Paper
- C1
- open access
ORCmKit: an open-source library for organic Rankine cycle modelling and analysis
-
Evaluation of heat transfer correlations for helical coils based on measurements of a solar ORC operating at subcritical conditions
-
Study of two-phase heat transfer correlations for helical coils via measurements from a solar ORC
-
Two-phase heat transfer measurements of R254fa at high saturation temperatures in horizontal mini-channels
-
Heat flux measurements using thin film gauges in a production engine
-
- Conference Paper
- C1
- open access
Mechanistic model of an oil-flooded single-screw expander
-
CFD approaches applied to a single-screw expander
-
Analysis on lubricant film force for two types of meshing pair profile in single screw compressor
-
On the numerical simulation of fins in natural convection
-
On the scatter of experiments done with open-cell metal foam in open literature
-
Feasibility study of a plastic helical coil heat exchanger for a domestic storage tank
-
High-frequency oscillating water flow in highly-porous media: experimental results for 10-ppi metal foam
-
Comparison of heat transfer and pressure drop between analytical and computational approaches: a preliminary study for optimal heat exchanger design
-
Comparison between metal foam and finned tube heat exchangers for HVAC applications
-
Heat transfer measurements for non-Darcy flow in 10-ppi metal foam
(2016) -
Thermodynamic screening of organic rankine cycle working fluids and architectures: application to automotive internal combustion engines
-
Organic rankine cycle part-load characterization: validated models of an 11 kWe waste heat recovery ORC
-
Evaluation of an alkaline fuel cell system as a micro-CHP
-
- Conference Paper
- P1
- open access
Experimental results for oscillatory water flow in 10-ppi metal foam at low-frequencies
-
Preliminary experimental results of an 11 kWe organic Rankine cycle
-
- Journal Article
- A1
- open access
Development and a validation of a charge sensitive Organic Rankine Cycle (ORC) simulation tool
-
- Journal Article
- A1
- open access
Experimental investigation of the effect of engine settings on the wall heat flux during HCCI combustion
-
Characterizing the performance of a single-screw expander in a small-scale organic Rankine cycle for waste heat recovery
-
Different numerical approaches for the analysis of a single screw expander
-
Heat transfer in premixed spark ignition engines part II : systematic analysis of the heat transfer phenomena
-
- Journal Article
- A1
- open access
How to study thermal applications of open-cell metal foam: experiments and computational fluid dynamics
-
Demonstrating the use of thin film gauges for heat flux measurements in ICEs: measurements on an inlet valve in motored operation
-
Performance of heat pump drying system integrated into a blood dryer
-
- Journal Article
- A1
- open access
Heat transfer in premixed spark ignition engines part I : identification of the factors influencing heat transfer
-
Performance evaluation analysis of metal foam and flat tube heat exchangers for HVAC applications
(2016) -
- Miscellaneous
- open access
Best practice bij stoomtoepassingen
(2016) p.1-24 -
Design sensitivity analysis of a direct evaporator for low-temperature waste heat recovery orcs using various flow boiling heat transfer correlations
-
- Conference Paper
- C1
- open access
Design sensitivity analysis of using various flow boiling correlations for a direct evaporator in high-temperature waste heat recovery ORCs
-
Assessment of empirical heat transfer models for a CFR engine operated in HCCI mode
-
- Journal Article
- A1
- open access
Multi-objective thermo-economic optimization strategy for ORCs applied to subcritical and transcritical cycles for waste heat recovery
-
- Conference Paper
- C1
- open access
A coupled BES-zonal model to predict stratification in a large building
-
Numerical study on a metal foam heat sink in Buoyancy driven convection
-
Experimental study of the effects of foam height, orientation and radiative heat transfer on buoyancy-driven convection
-
The refrigerant two-phase flow void fraction in the vicinity of a sharp return bend
-
Determination of the ice concentration of ice slurries using impedance measurement
-
Investigation of the splitting of louvers for a louvered fin and tube heat exchanger
-
Thermodynamic optimization of organic rankine cycle architectures for waste heat recovery
-
Comparison of metal foam heat exchangers to a finned heat exchanger for low Reynolds number applications
-
- Conference Paper
- C1
- open access
Design sensitivity analysis of using various in-tube condensation correlations for an air-cooled condenser for ORCs
-
Techno-thermodynamic multi-objective optimization of organic rankine cycles for waste heat recovery
-
Case study of heat pump integration in a blood dryer