Van Eygen, Gilles, et al. “Comparison of Distinctive Polymeric Membrane Structures as Support Materials for Membrane Extraction of Chiral Amines.” SEPARATION AND PURIFICATION TECHNOLOGY, vol. 352, 2025, doi:10.1016/j.seppur.2024.128192.

Finazzi, Daniele, et al. “Study of Self-Heating and Local Strain Rate in Polyamide-6 and Short Fibre Glass/Polyamide-6 under Tension through Synchronised Full-Field Strain and Temperature Measurements.” POLYMER TESTING, vol. 132, 2024, doi:10.1016/j.polymertesting.2024.108361.

Nikforooz, Mehdi, et al. “Mixed Experimental-Numerical Method for Quantitative Measurement of Mode II Fibre/Matrix Interface Debonding and Comparison of Fibre Sizings in Single Short Fibre Composites.” POLYMER TESTING, vol. 134, 2024, doi:10.1016/j.polymertesting.2024.108435.

Frateur, Olmo, et al. “Development of Reversibly Photo-Crosslinkable Water-Stable Poly(2-Ethyl-2-Oxazoline) Nanofibers via Functionalization with Cinnamoyl Moieties.” EUROPEAN POLYMER JOURNAL, vol. 212, 2024, doi:10.1016/j.eurpolymj.2024.113076.

Finazzi, Daniele, et al. “Thermomechanical Coupling during Tensile Testing of PA6 and Short Fibre Glass/PA6.” Proceedings of the 21st European Conference on Composite Materials, edited by Cristophe Binetruy and Frédéric Jacquemin, vol. 3, The European Society for Composite Materials (ESCM) and the Ecole Centrale de Nantes., 2024, pp. 122–29, doi:10.60691/yj56-np80.

Debruyn, Gerben, et al. “Hydric Environment and Chemical Composition Shape Non-Avian Reptile Eggshell Absorption.” INTEGRATIVE AND COMPARATIVE BIOLOGY, 2024, doi:10.1093/icb/icae040.

Li, Minglun, et al. “Playing with Chlorine-Based Post-Modification Strategies for Manufacturing Silica Nanofibrous Membranes Acting as Stable Hydrophobic Separation Barriers.” ADVANCED FIBER MATERIALS, vol. 6, no. 1, 2024, pp. 145–57, doi:10.1007/s42765-023-00335-y.

Loccufier, Eva, et al. “A Broad Spectrum of Electrospun Organosilica Membrane Properties by Tuning the Chemical Nature of the Precursor Building Block.” MATERIALS TODAY CHEMISTRY, vol. 36, 2024, doi:10.1016/j.mtchem.2024.101950.

Loccufier, Eva, et al. “Fibrous Material Structure Developments for Sustainable Heterogeneous Catalysis : An Overview.” CHEMCATCHEM, vol. 16, no. 14, 2024, doi:10.1002/cctc.202301563.

De Spiegeleer, Margot, et al. “Point-of-Care Applicable Metabotyping Using MetaSAMP®-LA-REIMS : Metabolomics Research on Early Metabolic Disease (MetaBEAse) Cohort.” BeSOMS-BASO Winter Symposium 2023, Abstracts, 2023.

Verschraegen, Sofie, et al. “A Dedicated Protocol to Capture Orthosilicate Crosslinking Kinetics and Arrhenius Parameters.” CHEMICAL ENGINEERING JOURNAL, vol. 461, 2023, doi:10.1016/j.cej.2023.141701.

Verschatse, Olivier, et al. “Microscale and Macroscale Deformation Behavior of Electrospun Polymeric Nanofiber Membranes Using in Situ SEM during Mechanical Testing.” POLYMERS, vol. 15, no. 7, 2023, doi:10.3390/polym15071630.

Verschatse, Olivier, et al. “Development of a Versatile Speckle Pattern of Nano-Sized Polymer Particles for High-Resolution SEM-DIC.” POLYMER TESTING, vol. 125, 2023, doi:10.1016/j.polymertesting.2023.108134.

Archimi, Matteo, et al. “Optical Gain Switching by Thermo-Responsive Light-Emitting Nanofibers through Moisture Sorption Swelling.” ADVANCED OPTICAL MATERIALS, vol. 11, no. 13, 2023, doi:10.1002/adom.202202056.

Vanthournout, Bram, et al. “Rapid and Reversible Humidity-Dependent Colour Change by Water Film Formation in a Scaled Springtail.” JOURNAL OF THE ROYAL SOCIETY INTERFACE, vol. 20, no. 207, 2023, doi:10.1098/rsif.2023.0228.

Schynkel, Lucas, et al. “Cell Guiding Multicomponent Nanoyarn Tendon Scaffolds with Tunable Morphology and Flexibility.” ACS APPLIED MATERIALS & INTERFACES, vol. 15, no. 36, 2023, pp. 42113–3218, doi:10.1021/acsami.3c08241.

Becelaere, Jana, et al. “Solvent Electrospinning Amorphous Solid Dispersions with High Itraconazole, Celecoxib, Mebendazole and Fenofibrate Drug Loading and Release Potential.” JOURNAL OF CONTROLLED RELEASE, vol. 362, 2023, pp. 268–77, doi:10.1016/j.jconrel.2023.08.054.

Frateur, Olmo, et al. “Increasing Aqueous Drug Solubility by Solvent Electrospinning of Poly(2-Ethyl-2-Oxazoline) Based Stable Amorphous Solid Dispersions with High Drug Loading.” 2023 MRS Fall Meeting & Exhibit, Abstracts, Materials Research Society (MRS), 2023, pp. 1000–01.

De Spiegeleer, Margot, et al. “Metabotyping Children Using Rectal MetaSAMP®-LA-REIMS : The MetaBEAse Cohort.” ANNALS OF NUTRITION AND METABOLISM, vol. 79, no. 4, S. Karger AG, 2023, pp. 385–86.

Verschraegen, Sofie, et al. “Combining 29Si NMR and Kinetic Monte Carlo Modeling to Capture Tetraethyl Orthosilicate Crosslinking Kinetics.” ACS Fall 2023, Abstracts, 2023.

Swanckaert, Bianca, et al. “Chemical and Structural Induced Ductile-to-Brittle Transition in Electrospun Silica Nanofiber Membranes.” CERAMICS INTERNATIONAL, vol. 49, no. 20, 2023, pp. 33305–15, doi:10.1016/j.ceramint.2023.08.041.

Phan, Kim, et al. “Analysing the Potential of the Selective Dissolution of Elastane from Mixed Fiber Textile Waste.” RESOURCES CONSERVATION AND RECYCLING, vol. 191, 2023, doi:10.1016/j.resconrec.2023.106903.

Swanckaert, Bianca, et al. “Sulfonated Silica-Based Cation-Exchange Nanofiber Membranes with Superior Self-Cleaning Abilities for Electrochemical Water Treatment Applications.” SEPARATION AND PURIFICATION TECHNOLOGY, vol. 309, 2023, doi:10.1016/j.seppur.2022.123001.

De Spiegeleer, Margot, et al. “Point-of-Care Applicable Metabotyping Using Biofluid-Specific Electrospun MetaSAMPs Directly Amenable to Ambient LA-REIMS.” SCIENCE ADVANCES, vol. 9, no. 23, American Association for the Advancement of Science (AAAS), 2023, doi:10.1126/sciadv.ade9933.

Merckx, Ronald, et al. “Poly(2-Isoproprenyl-2-Oxazoline)-Based Reactive Hydrophilic Cross-Linked Nanofiber Networks as the Basis for Colorimetric Continuous Meat Freshness Monitoring Sensors.” CHEMISTRY OF MATERIALS, vol. 35, no. 17, 2023, pp. 7079–93, doi:10.1021/acs.chemmater.3c01355.

Swanckaert, Bianca, et al. “High Capacity, Silica-Based Anion-Exchange Nanofiber Membranes for the Selective Recovery of Lactic Acid.” SUSTAINABLE MATERIALS AND TECHNOLOGIES, vol. 38, Elsevier BV, 2023, doi:10.1016/j.susmat.2023.e00758.

Loccufier, Eva, et al. “CO2 Methanation with Ru@MIL-101 Nanoparticles Fixated on Silica Nanofibrous Veils as Stand-Alone Structured Catalytic Carrier.” APPLIED CATALYSIS B-ENVIRONMENTAL, vol. 320, 2023, doi:10.1016/j.apcatb.2022.121972.

Plekhova, Vera, et al. “Electrospun Nanofibrous Samplers (MetaSAMP) Provide Superior Biofluid Metabolome Stability and Coverage Following Direct Laser-Assisted Rapid Evaporative Ionization Mass Spectrometry.” 70th ASMS Conference on Mass Spectrometry and Allied Topics, Abstracts, 2022.

Verschraegen, Sofie, et al. “Electrospinning of Silica Nanofibers : How the Sol Viscosity Influences the Taylor Cone.” Faculty of Engineering and Architecture Research Symposium 2022 (FEARS 2022), Abstracts, 2022, doi:10.5281/zenodo.7400772.

Becelaere, Jana, et al. “Improving Flubendazole Efficiency through Time-Stable Electrospun Amorphous Solid Dispersions.” Faculty of Engineering and Architecture Research Symposium 2022 (FEARS 2022), Abstracts, 2022, doi:10.5281/zenodo.7406006.

Loccufier, Eva, et al. “Inorganic Membranes Allow for a More Clever Use of Nanoparticles as CO2 Conversion Catalyst.” Faculty of Engineering and Architecture Research Symposium 2022 (FEARS 2022), Abstracts, 2022, doi:10.5281/zenodo.7406152.

Swanckaert, Bianca, et al. “Ion-Exchange Nanofiber Membranes for Advanced Water Treatment Applications.” Faculty of Engineering and Architecture Research Symposium 2022 (FEARS 2022), Abstracts, 2022, doi:10.5281/zenodo.7406026.

Verschatse, Olivier, et al. “Observing Deformation Mechanisms at Microscale.” Faculty of Engineering and Architecture Research Symposium 2022 (FEARS 2022), Abstracts, 2022, doi:10.5281/zenodo.7405881.

Verschatse, Olivier, et al. “In-Situ SEM Analysis of the Tensile Properties of Microscale Epoxy Specimens.” The Fiber Society’s Spring 2022 Conference : Abstracts, 2022.

Rijckaert, Sander, et al. “Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication.” POLYMERS, vol. 14, no. 2, 2022, doi:10.3390/polym14020298.

Van de Voorde, Babs, et al. “Electrospinning of Poly(Decamethylene Terephthalate) to Support Vascular Graft Applications.” EUROPEAN POLYMER JOURNAL, vol. 165, 2022, doi:10.1016/j.eurpolymj.2022.111003.

Verschatse, Olivier, et al. “Mechanical Study of the Tensile Prperties of Epoxy at the Microscale Level.” 18th European Mechanics of Materials Conference (EMMC18), Abstracts, 2022.

Finazzi, Daniele, et al. “Effect of Fibre Orientation, Temperature, Moisture Content and Strain Rate on the Tensile Behaviour of Short Glass Fibre-Reinforced Polyamide 6.” Proceedings of the 20th European Conference on Composite Materials : Composites Meet Sustainability : Volume 1 : Materials, edited by Anastasios P. Vassilopoulos and Véronique Michaud, Composite Construction Laboratory (CCLab), 2022, pp. 1167–74.

Verschatse, Olivier, et al. “Micro-Scale Measurements on Epoxy Using in-Situ Microscopic Techniques.” Composites Meet Sustainability : Proceedings of the 20th European Conference on Composite Materials (ECCM20) : Vol. 1 : Materials, edited by Anastasios P. Vassilopoulos and Véronique Michaud, Composite Construction Laboratory (CCLab), 2022, pp. 1550–57.

Loccufier, Eva, et al. “Stand-Alone Silica Nanofibrous Membranes for Advanced Catalytic and Purification Applications.” The Fiber Society’s Spring 2022 Conference, Abstracts, 2022.

Abebe, Muluneh G., et al. “Photonic Enhancements to Tailor the Comfort of Radiative Textiles.” META 2022 : The 12th International Conference on Metamaterials, Photonic Crystals and Plasmonics, edited by Said Zouhdi, 2022, pp. 742–43.

Swanckaert, Bianca, et al. “A Review on Ion-Exchange Nanofiber Membranes : Properties, Structure and Application in Electrochemical (Waste)Water Treatment.” SEPARATION AND PURIFICATION TECHNOLOGY, vol. 287, 2022, doi:10.1016/j.seppur.2022.120529.

Phan, Kim, et al. “A Comparative Theoretical Study on the Solvent Dependency of Anthocyanin Extraction Profiles.” JOURNAL OF MOLECULAR LIQUIDS, vol. 351, 2022, doi:10.1016/j.molliq.2022.118606.

Swanckaert, Bianca, et al. “Ion-Exchange Nanofiber Membranes for Advanced Water Treatment Applications.” The Fiber Society’s Spring 2022 Conference, Abstracts, 2022.

Loccufier, Eva, et al. “Tunable Silica Nanofibrous Structures in View of Resolving Challenging Purification and Separation Obstacles.” Autex 2022 Conference, Proceedings, Lodz University of Technology, 2022, pp. 301–05, doi:10.34658/9788366741751.63.

Schoolaert, Ella, et al. “Eco-Friendly Colorimetric Nanofiber Design : Halochromic Sensors with Tunable PH-Sensing Regime Based on 2-Ethyl-2-Oxazoline and 2-n-Butyl-2-Oxazoline Statistical Copolymers Functionalized with Alizarin Yellow R.” ADVANCED FUNCTIONAL MATERIALS, vol. 32, no. 1, 2022, doi:10.1002/adfm.202106859.

Becelaere, Jana, et al. “Stable Amorphous Solid Dispersion of Flubendazole with High Loading via Electrospinning.” JOURNAL OF CONTROLLED RELEASE, vol. 351, 2022, pp. 123–36, doi:10.1016/j.jconrel.2022.09.028.

De Keer, Lies, et al. “Computational Prediction of the Molecular Configuration of Three-Dimensional Network Polymers.” NATURE MATERIALS, vol. 20, no. 10, 2021.

Rijckaert, Sander, et al. “Building the Third Dimension : Microstructure and Mechanics of Additive Manufactured Continuous Aramid Fiber/PETG Composites with Variable Fiber Content through in-Nozzle Impregnation.” AUTEX 2021, 20th World Textile Conference, Abstracts, edited by Fernando Ferreira et al., AUTEX, 2021, pp. 463–64.

Schalnat, Joanna, et al. “Long-Term Stiffness Prediction of Particle Filled Polymers by Dynamic Mechanical Analysis : Frequency Sweep versus Creep Method.” POLYMER TESTING, vol. 103, 2021, doi:10.1016/j.polymertesting.2021.107368.

Daelemans, Lode, et al. “Toughening Mechanisms Responsible for Excellent Crack Resistance in Thermoplastic Nanofiber Reinforced Epoxies through In-Situ Optical and Scanning Electron Microscopy.” COMPOSITES SCIENCE AND TECHNOLOGY, vol. 201, 2021, doi:10.1016/j.compscitech.2020.108504.

Yang, Yang, et al. “Fully Integrated Flexible Dielectric Monitoring Sensor System for Real-Time in Situ Prediction of the Degree of Cure and Glass Transition Temperature of an Epoxy Resin.” IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, vol. 70, 2021, doi:10.1109/TIM.2021.3057291.

Wang, Sisi, et al. “Lifting the Quality of Fused Filament Fabrication of Polylactic Acid Based Composites.” COMPOSITES PART B-ENGINEERING, vol. 210, 2021, doi:10.1016/j.compositesb.2021.108613.

De Keer, Lies, et al. “Computational Prediction of the Molecular Configuration of Three-Dimensional Network Polymers.” NATURE MATERIALS, vol. 20, no. 10, 2021, pp. 1422–30, doi:10.1038/s41563-021-01040-0.

Verschatse, Olivier, et al. “Does Size Matter? In-Situ SEM Analysis of the Tensile Properties of Epoxy at the Microscale.” AUTEX 2021, 20th World Textile Conference, Abstracts, edited by Fernando Ferreira et al., AUTEX, 2021, pp. 420–21.

Phan, Kim, et al. “Non-Food Applications of Natural Dyes Extracted from Agro-Food Residues : A Critical Review.” JOURNAL OF CLEANER PRODUCTION, vol. 301, 2021, doi:10.1016/j.jclepro.2021.126920.

Phan, Kim, et al. “A Comparative Study on the Photophysical Properties of Anthocyanins and Pyranoanthocyanins.” CHEMISTRY-A EUROPEAN JOURNAL, vol. 27, no. 19, 2021, pp. 5956–71, doi:10.1002/chem.202004639.

Wang, Sisi, et al. “Exploring Fused Filament Fabrication : From Morphology Control to Commercial Printing Settings.” International Polymer Process Innovation Conference 2021 (PPI-2021), Proceedings, Ghent University, 2021, pp. 21–23.

Verschatse, Olivier, et al. “Does Size Matter? In-Situ SEM Analysis of the Tensile Properties of Epoxy at the Microscale.” HyFiSyn Conference, Abstracts, 2021.

De la Ossa, Jose Gustavo, et al. “Immunomodulatory Activity of Electrospun Polyhydroxyalkanoate Fiber Scaffolds Incorporating Olive Leaf Extract.” APPLIED SCIENCES-BASEL, vol. 11, no. 9, 2021, doi:10.3390/app11094006.

Kalaoglu Altan, Özlem İpek, et al. “Silver Nanoparticle-Coated Polyhydroxyalkanoate Based Electrospun Fibers for Wound Dressing Applications.” MATERIALS, vol. 14, no. 17, 2021, doi:10.3390/ma14174907.

Tomme, Brecht, et al. “Removal of Hazardous Finishes to Enable Mechanical Recycling of Waste Acrylic Fabrics.” AUTEX 2021, 20th World Textile Conference, Abstracts, edited by Fernando Ferreira et al., AUTEX, 2021, pp. 496–97.

De Clerck, Karen, and Johanna Louwagie. “Nieuws Uit de Vakgroep : CTSE in Beweging : Innovator in Textiel- En Polymeermaterialen.” UNITEX, no. 4, 2020, pp. 47–47.

Loccufier, Eva, et al. “Degradation Kinetics of Isoproturon and Its Subsequent Products in Contact with TiO2 Functionalized Silica Nanofibers.” CHEMICAL ENGINEERING JOURNAL, vol. 387, 2020, doi:10.1016/j.cej.2020.124143.

Daelemans, Lode, et al. “Effect of Interleaved Polymer Nanofibers on the Properties of Glass and Carbon Fiber Composites.” Fiber-Reinforced Nanocomposites : Fundamentals and Applications, edited by Baogue Han et al., Elsevier, 2020, pp. 235–60, doi:10.1016/B978-0-12-819904-6.00011-6.

Verschatse, Olivier, et al. “In-Situ Observations of Microscale Ductility in a Quasi-Brittle Bulk Scale Epoxy.” POLYMERS, vol. 12, no. 11, 2020, doi:10.3390/polym12112581.

Meireman, Timo, et al. “Nanofibre Toughening of Dissimilar Interfaces in Composites.” MATERIALS & DESIGN, vol. 195, 2020, doi:10.1016/j.matdes.2020.109050.

Meireman, Timo, et al. “Delamination Resistant Composites by Interleaving Bio-Based Long-Chain Polyamide Nanofibers through Optimal Control of Fiber Diameter and Fiber Morphology.” COMPOSITES SCIENCE AND TECHNOLOGY, vol. 193, 2020, doi:10.1016/j.compscitech.2020.108126.

Schalnat, Joanna, et al. “Influencing Parameters on Measurement Accuracy in Dynamic Mechanical Analysis of Thermoplastic Polymers and Their Composites.” POLYMER TESTING, vol. 91, 2020, doi:10.1016/j.polymertesting.2020.106799.

Wang, Sisi, et al. “The Transferability and Design of Commercial Printer Settings in PLA/PBAT Fused Filament Fabrication.” POLYMERS, vol. 12, no. 11, 2020, doi:10.3390/polym12112573.

D’hooge, Dagmar, et al. “The Amazing World of Network Polymers and Their Applications.” MIPOL2020, Milan Polymer Days, Abstracts, 2020, pp. 18–18.

Merckx, Ronald, et al. “Förster Resonance Energy Transfer in Fluorophore Labeled Poly(2-Ethyl-2-Oxazoline)s.” JOURNAL OF MATERIALS CHEMISTRY C, vol. 8, no. 40, 2020, pp. 14125–37, doi:10.1039/d0tc02830d.

Schoolaert, Ella, et al. “Immiscibility of Chemically Alike Amorphous Polymers : Phase Separation of Poly(2-Ethyl-2-Oxazoline) and Poly(2‑n‑propyl-2- Oxazoline).” MACROMOLECULES, vol. 53, no. 17, 2020, pp. 7590–600, doi:10.1021/acs.macromol.0c00970.

Schoolaert, Ella, et al. “Nanofibers with a Tunable Wettability by Electrospinning and Physical Crosslinking of Poly(2-n-Propyl-2-Oxazoline).” MATERIALS & DESIGN, vol. 192, 2020, doi:10.1016/j.matdes.2020.108747.

Phan, Kim, et al. “The Potential of Anthocyanins from Blueberries as a Natural Dye for Cotton : A Combined Experimental and Theoretical Study.” DYES AND PIGMENTS, vol. 176, 2020, doi:10.1016/j.dyepig.2019.108180.

Lacoste, Clément, et al. “Development of Bionanocomposites Based on Poly(3-Hydroxybutyrate-Co-3-Hydroxyvalerate)/Polylactide Blends Reinforced with Cloisite 30B.” JOURNAL OF FUNCTIONAL BIOMATERIALS, vol. 11, no. 3, 2020, doi:10.3390/jfb11030064.

Coltelli, Maria-Beatrice, et al. “Pullulan for Advanced Sustainable Body- and Skin-Contact Applications.” JOURNAL OF FUNCTIONAL BIOMATERIALS, vol. 11, no. 1, 2020, doi:10.3390/jfb11010020.

Azimi, Bahareh, et al. “Electrosprayed Chitin Nanofibril/Electrospun Polyhydroxyalkanoate Fiber Mesh as Functional Nonwoven for Skin Application.” JOURNAL OF FUNCTIONAL BIOMATERIALS, vol. 11, no. 3, 2020, doi:10.3390/jfb11030062.

Tomme, Brecht, and Karen De Clerck. “Nieuws Uit de Vakgroep : REACT Project : REcycling of Waste ACrylic Textiles (Horizon 2020).” UNITEX, no. 3, 2020, pp. 51–51.

Daelemans, Lode, et al. “Composite Materials: Excellent Nanofiber Adhesion for Hybrid Polymer Materials with High Toughness Based on Matrix Interdiffusion during Chemical Conversion (Adv. Funct. Mater. 8/2019).” ADVANCED FUNCTIONAL MATERIALS, vol. 29, no. 8, 2019, doi:10.1002/adfm.201970051.

Schoolaert, Ella, et al. “Going from Polymer to Application : Solvent Electrospinning of Optical Nanofibrous Sensors.” AUTEX2019 : 19th World Textile Conference on Textiles at the Crossroads, AUTEX, 2019.

Wang, Sisi, et al. “Extrusion Based Additive Manufacturing of Biobased Polymers.” Polymer Process Engineering 2019 (PPE19) : Abstracts, 2019.

Ciera, Lucy, et al. “Electrospinning Repellents in Polyvinyl Alcohol-Nanofibres for Obtaining Mosquito-Repelling Fabrics.” ROYAL SOCIETY OPEN SCIENCE, vol. 6, no. 8, 2019, doi:10.1098/rsos.182139.

Phan, Kim, et al. “Exploring the Potential of Anthocyanins as a Natural Dye for Non-Food Applications.” GCE/GSC Conference, Abstracts, 2019.

Loccufier, Eva, et al. “Electrospinning of Silica Nanofibers without Carrier Polymer for Advanced Engineering Applications.” AUTEX2019 : 19th World Textile Conference on Textiles at the Crossroads, AUTEX, 2019.

Bossier, Sander, et al. “Orthogonal Tandem Oxidative Carboxylation of Styrene by VPOM@CTF@PA-4,6 Nanofiber.” Netherlands’ Catalysis and Chemistry Conference, 20th, Abstracts, 2019.

Daelemans, Lode, and Karen De Clerck. “Nieuws Uit de Vakgroep : Nieuwe Analysetechnieken Aan Ugent Verbinden de Microwereld van Textiel Met Onze Macroscopische Wereld.” UNITEX, no. 1, Prof. Dr. em. M. Van Parys, 2019, pp. 51–51.

Verschatse, Olivier, et al. Understanding the Small Scale to Predict the Large Scale. 2019.

Daelemans, Lode, et al. “Excellent Nanofiber Adhesion for Hybrid Polymer Materials with High Toughness Based on Matrix Interdiffusion during Chemical Conversion.” ADVANCED FUNCTIONAL MATERIALS, vol. 29, no. 8, Wiley, 2019, doi:10.1002/adfm.201807434.

Daelemans, Lode, et al. “Nanofibers for Damage Resistant Composite Materials.” PROCEEDINGS OF THE 19TH WORLD TEXTILE CONFERENCE, Open Journal System of Ghent University, 2019.

Loccufier, Eva, et al. “Electrospinning of Silica Nanofibrous Membranes for the Separation of Heterogeneous Azeotropes.” Book of Abstracts : XX International Sol-Gel Conference : Next Generation, ITMO University ; ISGS (International Sol-Gel Society), 2019, pp. 48–49.

Daelemans, Lode, et al. “Interdiffusing Core-Shell Nanofiber Interleaved Composites for Excellent Mode I and Mode II Delamination Resistance.” COMPOSITES SCIENCE AND TECHNOLOGY, vol. 175, 2019, pp. 143–50, doi:10.1016/j.compscitech.2019.03.019.

Geerinck, Ruben, et al. “One-Shot Production of Large-Scale 3D Woven Fabrics with Integrated Prismatic Shaped Cavities and Their Applications.” MATERIALS & DESIGN, vol. 165, Elsevier, 2019, doi:10.1016/j.matdes.2018.107578.

Wang, Sisi, et al. “Improving Mechanical Properties for Extrusion-Based Additive Manufacturing of Poly(Lactic Acid) by Annealing and Blending with Poly(3-Hydroxybutyrate).” POLYMERS, vol. 11, no. 9, 2019, doi:10.3390/polym11091529.

Wang, Sisi, et al. “Bio-Material Polylactic Acid/Poly(Butylene Adipate-Co-Terephthalate) Blend Development for Extrusion-Based Additive Manufacturing.” AUTEX 2019, 19th World Textile Conference on Textiles at the Crossroads, Autex, 2019.

Wang, Sisi, et al. “Bio-Material Polylactic Acid/Poly(Butylene Adipate-Co-Terephthalate) Blend Developed for Extrusion- Based Additive Manufacturing.” AUTEX 2019, 19th World Textile Conference on Textiles at the Crossroads, 2019.

De Keer, Lies, et al. “From Molecule to Material Performance : Multiscale Design of (in)Organic Network Polymers.” 16th Pacific Polymer Conference (PPC16), Abstracts, 2019.

Li, Yin, et al. “Effect of Crosslinking Stage on Photocrosslinking of Benzophenone Functionalized Poly(2-Ethyl-2-Oxazoline) Nanofibers Obtained by Aqueous Electrospinning.” EUROPEAN POLYMER JOURNAL, vol. 112, 2019, pp. 24–30, doi:10.1016/j.eurpolymj.2018.12.030.

Kalaoglu Altan, Özlem İpek, et al. “Crosslinking of Electrospun and Bioextruded Partially Hydrolyzed Poly(2-Ethyl-2-Oxazoline) Using Glutaraldehyde Vapour.” EUROPEAN POLYMER JOURNAL, vol. 120, 2019, doi:10.1016/j.eurpolymj.2019.109218.

Schoolaert, Ella, et al. “Going from Polymer to Application : Ecofriendly Solvent Electrospinning of Optical Nanofibrous Sensors.” Abstracts : The 6th International Conference on Electrospinning, Donghua University, 2019, pp. 202–202.

Schoolaert, Ella, et al. “From Polymer to Application : Solvent Electrospinning of Poly(2-Oxazoline)s.” ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, vol. 257, 2019.

Becelaere, Jana, et al. “Therapeutic Nanofibers? Innovative Oral Drug Delivery for Improved Bioavailability.” FEARS 2019 : Book of Abstracts, 2019, pp. 18–19.

Kalaoglu Altan, Özlem İpek, et al. “Electrospun Nanofibers for Skin-Contact Applications.” AUTEX 2019, 19th World Textile Conference on Textiles at the Crossroads, Autex, 2019.

Kalaoglu Altan, Özlem İpek, et al. “Electrospun Nanofibers for Skin-Contact Applications.” EUPOC 2019 – Electrospinning and Related Techniques : From Design to Production of Advanced Polymer Materials and Devices, Abstracts, 2019, pp. 68–68.

Loccufier, Eva, et al. “Azeotrope Separation : Silica Nanofibrous Membranes for the Separation of Heterogeneous Azeotropes (Adv. Funct. Mater. 44/2018).” ADVANCED FUNCTIONAL MATERIALS, vol. 28, no. 44, Wiley, 2018, doi:10.1002/adfm.201870313.

Wang, Sisi, et al. “Polylactic Acid/Poly-3-Hydroxybutyrate Applications in Extrusion Based Additive Manufacturing.” International Conference on Polymers and Moulds Innovations - PMI 2018, edited by António Pontes, Institute of Polymers and Composites, University of Minho, Portugal, 2018.

Wang, Sisi, et al. “Recent Advances in Extrusion Based Additive Manufacturing Material Developments.” P70 - Polymer Engineering International / UK-China AMRI, 2018.

De Buysser, Klaartje, et al. “Electrospinning and Functionalisation of Silicon Oxide Nanofibres via Sol-Gel Technology.” MRS Spring Meeting, Abstracts, 2018.

De Clerck, Karen, et al. “Electrospinning of Silica Nanofibers without Carrier Polymer for Advanced Applications.” ELEN2018 : ELectrospinning for ENergy Conference, 2018.

De Clerck, Karen, and Lode Daelemans. “Current Status in Composite Laminates Enhanced by Electrospun Nanofibres.” Electrospin 2018 International Conference, edited by Eugene Smit, The Stellenbosch Nanofiber Company (Pty) Ltd., 2018, pp. 29–29.

Daelemans, Lode, et al. “Nanostructured Hydrogels by Blend Electrospinning of Polycaprolactone/Gelatin Nanofibers.” NANOMATERIALS, vol. 8, no. 7, MDPI AG, 2018, doi:10.3390/nano8070551.

Loccufier, Eva, et al. “Silica Nanofibrous Membranes for the Separation of Heterogeneous Azeotropes.” ADVANCED FUNCTIONAL MATERIALS, vol. 28, no. 44, 2018, doi:10.1002/adfm.201804138.

Cohades, Amaël, et al. “Size Limitations on Achieving Tough and Healable Fibre Reinforced Composites through the Use of Thermoplastic Nanofibres.” ECCM18 - 18th European Conference on Composite Materials : Proceedings, 2018.

Cuvellier, Audrey, et al. “Coaxial Electrospinning of Epoxy and Amine Monomers in a Pullulan Shell for Self-Healing Nanovascular Systems.” POLYMER TESTING, vol. 69, Elsevier, 2018, pp. 146–56, doi:10.1016/j.polymertesting.2018.05.023.

Cohades, Amaël, et al. “Size Limitations on Achieving Tough and Healable Fibre Reinforced Composites through the Use of Thermoplastic Nanofibres.” COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, vol. 112, Elsevier, 2018, pp. 485–95, doi:10.1016/j.compositesa.2018.07.002.

Daelemans, Lode, et al. “Electrospun Nanofibrous Interleaves for Improved Low Velocity Impact Resistance of Glass Fibre Reinforced Composite Laminates.” MATERIALS & DESIGN, vol. 141, no. 5, Elsevier BV, 2018, pp. 170–84, doi:10.1016/j.matdes.2017.12.045.

Li, Yin, et al. “In Situ Cross-Linked Nanofibers by Aqueous Electrospinning of Selenol-Functionalized Poly(2-Oxazoline)s.” MACROMOLECULES, vol. 51, no. 15, 2018, pp. 6149–56, doi:10.1021/acs.macromol.8b01113.

De Smet, Lieselot, et al. “Plasma Dye Coating as Straightforward and Widely Applicable Procedure for Dye Immobilization on Polymeric Materials.” NATURE COMMUNICATIONS, vol. 9, 2018, doi:10.1038/s41467-018-03583-4.

Schoolaert, Ella, et al. “Can Poly(N-Isopropyl Acrylamide) Be Electrospun from Water ? Yes !” Electrospin 2018 International Conference, edited by Eugene Smit, Stellenbosch Nanofiber Company (Pty) Ltd., 2018, pp. 59–59.

Schoolaert, Ella, et al. “Waterborne Electrospinning of Poly(N-Isopropylacrylamide) by Control of Environmental Parameters.” ACS APPLIED MATERIALS & INTERFACES, vol. 9, no. 28, 2017, pp. 24100–10, doi:10.1021/acsami.7b05074.

Geerinck, Ruben, et al. “PRODUCTION AND EVALUATION OF COMPOSITES CONSISTING OF WOVEN FABRICS WITH INTEGRATED PRISMATIC SHAPED CAVITIES.” 8th International Conference on Composites Testing and Model Identification, edited by SV Lomov et al., KU Leuven, 2017, pp. 1–2.

Geltmeyer, Jozefien, et al. “TiO2 Functionalized Nanofibrous Membranes for Removal of Organic (Micro)Pollutants from Water.” SEPARATION AND PURIFICATION TECHNOLOGY, vol. 179, 2017, pp. 533–41, doi:10.1016/j.seppur.2017.02.037.

Ceylan, Özgür, and Karen De Clerck. “Moisture Sorption in Naturally Coloured Cotton Fibres.” 17TH WORLD TEXTILE CONFERENCE AUTEX 2017 - SHAPING THE FUTURE OF TEXTILES, vol. 254, IOP Publishing, 2017, pp. 1–3, doi:10.1088/1757-899x/254/14/142006.

Kizildag, Nuray, et al. “Coaxial Nanofibers Containing TiO2 in the Shell for Water Treatment Applications.” 17TH WORLD TEXTILE CONFERENCE AUTEX 2017 - SHAPING THE FUTURE OF TEXTILES, vol. 254, IOP Publishing, 2017, pp. 1–6, doi:10.1088/1757-899x/254/10/102007.

De Clerck, Karen, et al. “Advanced Colorimetric Sensors Based on Dye-Functionalized Nanofibers.” ElectrospinCY_2017, 2017, pp. 32–32.

Geerinck, Ruben, et al. “Woven Fabrics with Integrated Prismatic Shaped Cavities for Technical Applications.” Proceedings of the 6th International Conference on Intelligent Textiles and Mass Customisation, 2017.

Schoolaert, Ella, et al. “Colorimetric Nanofibers as Optical Sensors.” ADVANCED FUNCTIONAL MATERIALS, vol. 27, no. 38, 2017, doi:10.1002/adfm.201702646.

Cuvellier, A., et al. “Selection of Healing Agents for a Vascular Self-Healing Application.” POLYMER TESTING, vol. 62, Elsevier BV, 2017, pp. 302–10, doi:10.1016/j.polymertesting.2017.07.013.

Daelemans, Lode, et al. “Electrospun Nanofibers for Highly Toughened Fibre Reinforced Polymer Composite Laminates.” International Conference on Intelligent Textiles and Mass Customisation (ITMC2017) : Proceedings, 2017.

Daelemans, Lode, et al. “Nano-Engineering Highly Toughened Fibre Reinforced Polymer Composites by Interleaving Electrospun Nanofibres for Advanced Applications.” ElectrospinCY_2017, University of Cyprus, 2017, pp. 62–62.

Daelemans, Lode, et al. “Improved Fatigue Delamination Behaviour of Composite Laminates with Electrospun Thermoplastic Nanofibrous Interleaves Using the Central Cut-Ply Method.” COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, vol. 94, Elsevier BV, 2017, pp. 10–20, doi:10.1016/j.compositesa.2016.12.004.

Meireman, Timo, et al. “Interlaminar Toughening of Resin Transfer Moulded Laminates by Electrospun Polycaprolactone : Effect of Interleave Morphology.” ElectrospinCY_2017, University of Cyprus, 2017, pp. 83–83.

Meireman, Timo, et al. “Interlaminar Toughening of Resin Transfer Molded Laminates by Electrospun Polycaprolactone Structures : Effect of the Interleave Morphology.” PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017), Inegi-feup, 2017, pp. 551–52.

van der Heijden, Sam, et al. “Novel Composite Materials with Tunable Delamination Resistance Using Functionalizable Electrospun SBS Fibers.” COMPOSITE STRUCTURES, vol. 159, 2017, pp. 12–20, doi:10.1016/j.compstruct.2016.09.057.

Schoolaert, Ella, et al. “Waterborne Electrospinning of Poly(N-Isopropyl Acrylamide) towards Stable Nanofibers.” ElectrospinCY_2017, University of Cyprus, 2017, pp. 81–81.

De Meyer, Thierry, et al. “Halochromic Properties of Sulfonphthaleine Dyes in a Textile Environment: The Influence of Substituents.” DYES AND PIGMENTS, vol. 124, 2016, pp. 249–57, doi:10.1016/j.dyepig.2015.09.007.

Geltmeyer, Jozefien, et al. “The Influence of Tetraethoxysilane Sol Preparation on the Electrospinning of Silica Nanofibers.” JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, vol. 77, no. 2, 2016, pp. 453–62, doi:10.1007/s10971-015-3875-1.

Daelemans, Lode, et al. “Using Aligned Nanofibres for Identifying the Toughening Micromechanisms in Nanofibre Interleaved Laminates.” COMPOSITES SCIENCE AND TECHNOLOGY, vol. 124, Elsevier, 2016, pp. 17–26, doi:10.1016/j.compscitech.2015.11.021.

Steyaert, Iline, et al. “Gelatin Nanofibers: Analysis of Triple Helix Dissociation Temperature and Cold-Water-Solubility.” FOOD HYDROCOLLOIDS, vol. 57, 2016, pp. 200–08, doi:10.1016/j.foodhyd.2016.01.016.

Daels, Nele, et al. “Structure Changes and Water Filtration Properties of Electrospun Polyamide Nanofibre Membranes.” WATER SCIENCE AND TECHNOLOGY, vol. 73, no. 8, 2016, pp. 1920–26, doi:10.2166/wst.2016.033.

Daelemans, Lode, et al. “Increasing the Damage Resistance of Composites by Interleaving Them with Electrospun Nanofibrous Veils.” 17th European Conference on Composite Materials, European Society for Composite Materials (ESCM), 2016, pp. 1–8.

De Clerck, Karen, et al. “Dye Functionalized Nanofibers for Fast, Reversible and Easy Read-out Colorimetric Sensor Materials.” IC3EM 2016 Book of Abstracts, 2016, pp. 104–104.

Schoolaert, Ella, et al. “Blend Electrospinning of Dye-Functionalized Chitosan and Polycaprolactone: Towards Biocompatible PH-Sensors.” IC3EM 2016 Book of Abstracts, 2016, pp. 126–126.

van der Heijden, Sam, et al. “TOWARDS DAMAGE RESISTANT COMPOSITES USING ELECTROSPUN NANOFIBERS: A MULTISCALE ANALYSIS OF THE TOUGHENING MECHANISMS.” 4th International Conference on Electrospinning, 2016, pp. 1–1.

Torre Muruzabal, Ana, et al. “Electrospinning of Sacrificial Nanofibers for the Creation of a Self-Healing Nanovascular Network and Its Effect on the Properties of an Epoxy Matrix.” 4th International Conference on Electrospinning, 2016, pp. 1–1.

Schoolaert, Ella, et al. “Blend Electrospinning of Dye-Functionalized Chitosan and Polycaprolactone: Towards Biocompatible PH-Sensors.” Electrospinning, 4th International Conference, Abstracts, 2016.

De Meyer, Thierry, et al. “Acidity Constant (PKa) Calculation of Large Solvated Dye Molecules : Evaluation of Two Advanced Molecular Dynamics Methods.” CHEMPHYSCHEM, vol. 17, no. 21, 2016, pp. 3447–59, doi:10.1002/cphc.201600734.

Schoolaert, Ella, et al. “Blend Electrospinning of Dye-Functionalized Chitosan and Polycaprolactoe : Towards Biocompatible PH-Sensors.” BPG Annual Meeting 2016_Book of Abstracts, 2016, pp. 129–129.

Rambour, Stijn, et al. “The Impact of Processing Parameters on the Production of Monofilaments for Artificial Turf Applications.” 7th Bi-Annual International Conference of Polymers and Moulds Innovations, edited by Kim Ragaert et al., Universiteit Gent, Department of Materials Science and Engineering, 2016, pp. 111–111.

Geltmeyer, Jozefien, et al. “Dye Modification of Nanofibrous Silicon Oxide Membranes for Colorimetric HCl and NH3 Sensing.” ADVANCED FUNCTIONAL MATERIALS, vol. 26, no. 33, 2016, pp. 5987–96, doi:10.1002/adfm.201602351.

Kalaoglu-Altan, Ozlem I., et al. “Multireactive Poly(2-Oxazoline) Nanofibers through Electrospinning with Crosslinking on the Fly.” ACS MACRO LETTERS, vol. 5, no. 6, 2016, pp. 676–81, doi:10.1021/acsmacrolett.6b00188.

Schoolaert, Ella, et al. “Blend Electrospinning of Dye-Functionalized Chitosan and Poly(ε-Caprolactone) : Towards Biocompatible PH-Sensors.” JOURNAL OF MATERIALS CHEMISTRY B, vol. 4, no. 26, 2016, pp. 4507–16, doi:10.1039/c6tb00639f.

De Clerck, Karen, et al. “Blend Electrospinning of Dye Functionalized Polymer Nanofibres for Colorimetric Sensors.” Electrospinning, 4th International Conference, Abstracts, 2016.

Geltmeyer, Jozefien, et al. “Colorimetric HCl and NH3 Sensing via Dye Modified Silicon Oxide Nanofibrous Membranes.” Electrospinning, 4th International Conference, Abstracts, 2016.

De Clerck, Karen, et al. “Dye-Functionalized Electrospun Nanofibers for Colorimetric Sensors.” Electrospinning : Science and Application, EMPA Workshop, Abstracts, EMPA, 2016.

Torre Muruzabal, Ana, et al. “Creation of a Nanovascular Network by Electrospun Sacrificial Nanofibers for Self-Healing Applications and Its Effect on the Flexural Properties of the Bulk Material.” POLYMER TESTING, vol. 54, Elsevier, 2016, pp. 78–83, doi:10.1016/j.polymertesting.2016.06.026.

van der Heijden, Sam, et al. “Interlaminar Toughening of Resin Transfer Molded Laminates by Electrospun Polycaprolactone Structures : Effect of the Interleave Morphology.” COMPOSITES SCIENCE AND TECHNOLOGY, vol. 136, Elsevier Sci Ltd, 2016, pp. 10–17, doi:10.1016/j.compscitech.2016.09.024.

Stubbe, Birgit, et al. “Aqueous Electrospinning of Poly(2-Ethyl-2-Oxazoline) : Mapping the Parameter Space.” EUROPEAN POLYMER JOURNAL, vol. 88, 2016, pp. 724–32, doi:10.1016/j.eurpolymj.2016.09.014.

Darko, Godfred, et al. “Steady State Electrospinning of Uniform Polyethersulfone Nanofibers Using a Non-Heated Solvent Mixture.” APPLIED NANOSCIENCE, vol. 6, no. 6, Springer Nature, 2016, pp. 837–45, doi:10.1007/s13204-015-0504-9.

van der Heijden, Sam, et al. “TOWARDS DAMAGE RESISTANT COMPOSITES USING ELECTROSPUN NANOFIBERS: A MULTISCALE ANALYSIS OF THE TOUGHENING MECHANISMS.” 4th International Conference on Electrospinning, edited by Dario Pisignano et al., Universita del Salento, 2016, pp. 1–1.

Torre Muruzabal, Ana, et al. “Electrospinning of Sacrificial Nanofibers for the Creation of a Self-Healing Nanovascular Network and Its Effect on the Properties of an Epoxy Matrix.” 4th International Conference on Electrospinning, edited by Dario Pisignano et al., Universita del Salento, 2016, pp. 1–1.

Daelemans, Lode, et al. “Damage-Resistant Composites Using Electrospun Nanofibers: A Multiscale Analysis of the Toughening Mechanisms.” ACS APPLIED MATERIALS & INTERFACES, edited by Kirk Schanze, vol. 8, no. 18, 2016, pp. 111806–18, doi:10.1021/acsami.6b02247.

Steyaert, Iline, et al. “Dye Immobilization in Halochromic Nanofibers through Blend Electrospinning of a Dye-Containing Copolymer and Polyamide-6.” POLYMER CHEMISTRY, vol. 6, no. 14, 2015, pp. 2685–94, doi:10.1039/c5py00060b.

Vanraes, Patrick, et al. “Decomposition of Atrazine Traces in Water by Combination of Non-Thermal Electrical Discharge and Adsorption on Nanofiber Membrane.” WATER RESEARCH, vol. 72, 2015, pp. 361–71, doi:10.1016/j.watres.2014.11.009.

Luickx, Nathalie, et al. “Optimization of the Activation and Nucleation Steps in the Precipitation of a Calcium Phosphate Primer Layer on Electrospun Poly(ε-Caprolactone).” JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, vol. 103, no. 2, 2015, pp. 511–24, doi:10.1002/jbm.a.35191.

Daels, Nele, et al. “Electrospun Nanofibre Membranes Functionalised with TiO2 Nanoparticles : Evaluation of Humic Acid and Bacterial Removal from Polluted Water.” SEPARATION AND PURIFICATION TECHNOLOGY, vol. 149, 2015, pp. 488–94, doi:10.1016/j.seppur.2015.06.016.

van der Heijden, Sam, et al. “Use of Triazolinedione Click Chemistry for Tuning the Mechanical Properties of Electrospun SBS-Fibers.” MACROMOLECULES, vol. 48, no. 18, 2015, pp. 6474–81, doi:10.1021/acs.macromol.5b01569.

De Clerck, Karen, and Paul Kiekens. “Electrospun Nanofibres: New Potentials and Challenges for Textile Materials.” ETP CONFERENCE, edited by Lutz Walter, EURATEX, 2015, pp. 1–43.

Daelemans, Lode, et al. “Using a Polyester Binder for the Interlaminar Toughening of Glass/Epoxy Composite Laminates.” 20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015.

van der Heijden, Sam, et al. “Interlaminar Toughening of Resin Transfer Moulded Glass Fibre Epoxy Laminates by Polycaprolactone Electrospun Nanofibres.” 20th International Conference on Composite Material, 2015.

Steyaert, Iline, et al. “Nanofibre-Based Sensors for Visual and Optical Monitoring.” Nanoscience and Technology, edited by Antonella Macagnano et al., Springer, 2015, pp. 157–77, doi:10.1007/978-3-319-14406-1_7.

Daelemans, Lode, et al. “Bisphenol A Based Polyester Binder as an Effective Interlaminar Toughener.” COMPOSITES PART B-ENGINEERING, vol. 80, Elsevier, 2015, pp. 145–53, doi:10.1016/j.compositesb.2015.05.044.

Daelemans, Lode, et al. “Nanofibre Bridging as a Toughening Mechanism in Carbon/Epoxy Composite Laminates Interleaved with Electrospun Polyamide Nanofibrous Veils.” COMPOSITES SCIENCE AND TECHNOLOGY, vol. 117, Elsevier, 2015, pp. 244–56, doi:10.1016/j.compscitech.2015.06.021.

De Clerck, Karen, and Sam van der Heijden. “Nieuws Uit de Vakgroep Textielkunde: Semi-Industriële Lijn Voor Productie van Nanovezelmembranen.” UNITEX : TWEEMAANDELIJKS TIJDSCHRIFT VOOR DE TEXTIELINDUSTRIE, no. 3, 2014, pp. 44–44.

Daels, Nele, et al. “Functionalisation of Electrospun Polymer Nanofibre Membranes with TiO2 Nanoparticles in View of Dissolved Organic Matter Photodegradation.” SEPARATION AND PURIFICATION TECHNOLOGY, vol. 133, 2014, pp. 282–90, doi:10.1016/j.seppur.2014.06.040.

Vanraes, Patrick, et al. “The Use of Pulsed DBD Discharge above Water in Combination with Nano-Fiber Filtration for Control of Micro-Pollutants in Water.” XXII Europhysics Conference on Atomic and Molecular Physics of Ionized Gases, Abstracts, 2014, pp. 344–45.

Steyaert, Iline, et al. “Melting Behaviour and Crystal Structure of Polyamide Nanofibres Analysed Using a Fast-Scanning Calorimeter.” BPG Annual Meeting 2014, Abstracts, Belgian Polymer Group, 2014, pp. 130–130.

Steyaert, Iline, and Karen De Clerck. “Nanofibrous Membranes for Visual and Optical Monitoring: A Focus on PH-­‐sensors.” Electrospinning for High Performance Sensing, Abstracts, CNR-IIA, 2014, pp. 25–26.

Goethals, Annelies, et al. “Polyamide Nanofiber Membranes Functionalized with Zinc Phthalocyanines.” JOURNAL OF APPLIED POLYMER SCIENCE, vol. 131, no. 13, 2014, doi:10.1002/app.40486.

De Meyer, Thierry, et al. “Substituent Effects on Absorption Spectra of PH Indicators: An Experimental and Computational Study of Sulfonphthaleine Dyes.” DYES AND PIGMENTS, vol. 102, ELSEVIER SCI LTD, 2014, pp. 241–50, doi:10.1016/j.dyepig.2013.10.048.

van der Heijden, Sam, et al. “The Effect of the Moisture Content on the Curing Characteristics of an Epoxy Matrix in the Presence of Nanofibrous Structures.” POLYMER TESTING, vol. 40, 2014, pp. 265–72, doi:10.1016/j.polymertesting.2014.08.019.

Geltmeyer, Jozefien, et al. “The Influence of Viscosity on the Stable Electrospinning of Silica Nanofibers.” 3rd International Conference on Electrospinning, Abstracts, The American Ceramic Society, 2014, pp. 27–27.

Steyaert, Iline, et al. “(ICE-036-2014) Thermal Analysis of Nanofibres: The Importance of Heating Rate.” 3rd International Conference on Electrospinning, Abstracts, The American Ceramic Society, 2014, pp. 26–26.

Guido, Emanuela, et al. “Influence of Catalyst in the Synthesis of a Cellulose-Based Sensor: Kinetic Study of 3-Glycidoxypropyltrimethoxysilane Epoxy Ring Opening by Lewis Acid.” SENSORS AND ACTUATORS B-CHEMICAL, vol. 203, 2014, pp. 213–22, doi:10.1016/j.snb.2014.06.126.

van der Heijden, Sam, et al. “Interlaminar Toughening of Resin Transfer Moulded Glass Fibre Epoxy Laminates by Polycaprolactone Electrospun Nanofibres.” COMPOSITES SCIENCE AND TECHNOLOGY, vol. 104, 2014, pp. 66–73, doi:10.1016/j.compscitech.2014.09.005.

Ceylan, Özgür, et al. “Dynamic Moisture Sorption Behavior of Cotton Fibers with Natural Brown Pigments.” CELLULOSE, vol. 21, no. 3, 2014, pp. 1149–61, doi:10.1007/s10570-014-0206-6.

Van Yperen-De Deyne, Andy, et al. “Exploring the Vibrational Fingerprint of the Electronic Excitation Energy via Molecular Dynamics.” JOURNAL OF CHEMICAL PHYSICS, vol. 140, no. 13, 2014, doi:10.1063/1.4869937.

Geltmeyer, Jozefien, et al. “Stable Electrospinning of Silica Nanofibres : Influence of Viscosity.” Colleció E-Treballs d’Informàtica i Tecnologia, edited by José M Lagarón et al., vol. 17, Universitat Jaume. Servei de Communicació i Publicacions, 2013, pp. 172–73, doi:10.6035/e-TIiT.2013.17.

Daels, Nele, et al. “Functionalisation of Electrospun Nanofibre Membranes with Titaniumdioxide Nanoparticles.” Colleció E-Treballs d’Informàtica i Tecnologia, edited by José M Lagarón et al., vol. 17, Universitat Jaume. Servei de Communicació i Publicacions, 2013, pp. 180–81, doi:10.6035/e-TIiT.2013.17.

De Schoenmaker, Bert, et al. “The Effect of Electrospun Polyamide 6 Nanofibres on the Mechanical Properties of a Glass Fibre/Epoxy Composite.” Colleció E-Treballs d’Informàtica i Tecnologia, edited by José M Lagarón et al., vol. 17, Universitat Jaume. Servei de Communicació i Publicacions, 2013, pp. 194–95, doi:10.6035/e-TIiT.2013.17.

Steyaert, Iline, et al. “Crystal Morphology of Polyamide Nanofibres Analysed Using Fast-Scanning Calorimetry.” Colleció E-Treballs d’Informàtica i Tecnologia, edited by José M Lagarón et al., vol. 17, Universitat Jaume. Servei de Communicació i Publicacions, 2013, pp. 211–12, doi:10.6035/e-TIiT.2013.17.

Ceylan, Özgür, et al. “The Effect of Water Immersion on the Thermal Degradation of Cotton Fibers.” CELLULOSE, vol. 20, no. 4, 2013, pp. 1603–12, doi:10.1007/s10570-013-9936-0.

Geltmeyer, Jozefien, et al. “Stable Electrospinning of Silica Nanofibres : Influence of Viscosity.” Sol-Gel, 17th International Conference, Abstracts, 2013.

Daels, Nele, et al. “Functionalisation of Electrospun Nanofibre Membranes with Titaniumdioxide Nanoparticles for Water Treatment.” IWA BeNeLux Regional Young Water Professionals Conference, 3rd, Abstracts, International Water Association (IWA), 2013.

Daels, Nele, et al. “Functionalisation of Electrospun Nanofibre Membranes with Titaniumdioxide Nanoparticles.” Water and Waste Water Technologies, 10th IWA Leading Edge Conference, Abstracts, International Water Association (IWA), 2013.

Geltmeyer, Jozefien, et al. “Stable Electrospinning of Silica Nanofibres: Viscosity Study.” 13th Autex World Textile Conference, Proceedings, edited by Chokri Cherif, Autex, 2013, pp. 1–4.

De Clerck, Karen, et al. “Halochromic Textile Materials as Innovative PH-Sensors.” XXIII International IFATCC Congress, Proceedings, IFATCC, 2013, pp. 1–6.

De Clerck, Karen. “Nieuws Uit de Vakgroep Textielkunde: Composieten Versterkt Met Nanovezels.” UNITEX : TWEEMAANDELIJKS TIJDSCHRIFT VOOR DE TEXTIELINDUSTRIE, vol. 1, no. maart, 2013, pp. 34–34.

Karakas, H., et al. “Electrospinning of Nanofibers for Functional Textile Applications.” International R&D Brokerage Event of “Innovative and Functional Textile Products”, Abstracts, ITKIB-ITA, 2013, pp. 166–68.

Geltmeyer, Jozefien, et al. “Optimum Sol Viscosity for Stable Electrospinning of Silica Nanofibres.” JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, vol. 67, no. 1, 2013, pp. 188–95, doi:10.1007/s10971-013-3066-x.

Ceylan, Özgür, et al. “The Sensitivity and Impact of Dye Structure and Fibre Micronaire on the Increased Dyeability of Bioengineered Cotton Fibres.” COLORATION TECHNOLOGY, vol. 129, no. 4, 2013, pp. 239–45, doi:10.1111/cote.12043.

Steyaert, Iline, et al. “Electrospinnability of a Polycaprolactone/Chitosan Polymer Blend Using a Novel Solvent System.” 13th Biennial Bayreuth Polymer Symposium, Abstracts, Universität Bayreuth, 2013, pp. 1–1.

De Clerck, Karen, et al. “The Use of Nanofibre Structures in Fibre-Reinforced Composites: Challenges and Opportunities.” International Istanbul Textile Congress 2013 Innovative and Functional Textiles, Abstracts, Istanbul Technical University, 2013, pp. 68–68.

Steyaert, Iline, et al. “Poster: Blend Electrospinning of Polycaprolactone/Chitosan Nanofibres.” Frontiers in Polymer Science, 2013, pp. 1–1.

De Baere, Ives, et al. “Modifying the Crack Growth in a Glass Fiber Reinforced Epoxy by Adding Polyamide 6 Nanofibers.” CompositesWeek@Leuven, edited by Larissa Gorbatikh, 2013.

Van der Schueren, Lien, et al. “Polycaprolactone and Polycaprolactone/Chitosan Nanofibres Functionalised with the PH-Sensitive Dye Nitrazine Yellow.” CARBOHYDRATE POLYMERS, vol. 91, no. 1, 2013, pp. 284–93, doi:10.1016/j.carbpol.2012.08.003.

De Schoenmaker, Bert, et al. “Effect of the Relative Humidity on the Fibre Morphology of Polyamide 4.6 and Polyamide 6.9 Nanofibres.” JOURNAL OF MATERIALS SCIENCE, vol. 48, no. 4, 2013, pp. 1746–54, doi:10.1007/s10853-012-6934-9.

Ceylan, Özgür, et al. “Combustion Characteristics of Cellulosic Loose Fibres.” FIRE AND MATERIALS, vol. 37, no. 6, 2013, pp. 482–90, doi:10.1002/fam.2147.

De Schoenmaker, Bert, et al. “Effect of Electrospun Polyamide 6 Nanofibres on the Mechanical Properties of a Glass Fibre/Epoxy Composite.” POLYMER TESTING, vol. 32, no. 8, 2013, pp. 1495–501, doi:10.1016/j.polymertesting.2013.09.015.

Steyaert, Iline, et al. “Fast-Scanning Calorimetry of Electrospun Polyamide Nanofibres: Melting Behaviour and Crystal Structure.” POLYMER, vol. 54, no. 25, 2013, pp. 6809–17, doi:10.1016/j.polymer.2013.10.032.

De Schoenmaker, Bert, et al. “Effect of Nanofibres on the Curing Characteristics of an Epoxy Matrix.” COMPOSITES SCIENCE AND TECHNOLOGY, vol. 79, 2013, pp. 35–41, doi:10.1016/j.compscitech.2013.02.009.

De Baere, Ives, et al. “Changes in Mechanical Behaviour of a Glass Fibre Reinforced Epoxy by Adding Polyamide 6 Nanofibres.” 6th International Conference on Composites Testing and Model Identification, Abstracts, edited by OT Thomsen et al., 2013, pp. 173–74.

De Clerck, Karen, et al. “The Use of Nanofibre Structures in Fibre-Reinforced Composites: Challenges and Opportunities.” International Istanbul Textile Congress 2013 Innovative and Functional Textiles, Proceedings, edited by Fatma Kalaoglu, ITU / ITKIB-ITA, 2013, pp. 1–5.

Van der Schueren, Lien, and Karen De Clerck. “Halochromic Textile Materials as Innovative PH-Sensors.” Advances in Science and Technology, edited by P Vincenzini and C Carfagna, vol. 80, Trans Tech Publications, 2013, pp. 47–52, doi:10.4028/www.scientific.net/AST.80.47.

De Vrieze, Sander, et al. “Filtration Performance of Electrospun Polyamide Nanofibres Loaded with Bactericides.” TEXTILE RESEARCH JOURNAL, vol. 82, no. 1, 2012, pp. 37–44, doi:10.1177/0040517511416273.

Van der Schueren, Lien, et al. “Novel Cellulose and Polyamide Halochromic Textile Sensors Based on the Encapsulation of Methyl Red into a Sol–Gel Matrix.” SENSORS AND ACTUATORS B-CHEMICAL, vol. 162, no. 1, 2012, pp. 27–34, doi:10.1016/j.snb.2011.11.077.

De Schoenmaker, Bert, et al. “Polyamide 6.9 Nanofibres Electrospun under Steady State Conditions from a Solvent/Non-Solvent Solution.” JOURNAL OF MATERIALS SCIENCE, vol. 47, no. 9, 2012, pp. 4118–26, doi:10.1007/s10853-012-6266-9.

Ceylan, Özgür, et al. “Innovative Screening of Novel Bioengineered Cotton Fibers Containing Oligochitin.” TEXTILE RESEARCH JOURNAL, vol. 82, no. 8, 2012, pp. 801–09, doi:10.1177/0040517511404595.

De Meyer, Thierry, et al. “UV-VIS Spectra of Azo Dyes in Aqueous Environment: A Combined TD-DFT and Molecular Dynamics Study.” Challenges in Density Matrix and Density Functional Theory, Abstracts, 2012, pp. P8–P8.

Van der Schueren, Lien, et al. “The Influence of a Polyamide Matrix on the Halochromic Behaviour of the PH-Sensitive Azo Dye Nitrazine Yellow.” DYES AND PIGMENTS, vol. 94, no. 3, 2012, pp. 443–51, doi:10.1016/j.dyepig.2012.02.013.

Van der Schueren, Lien, and Karen De Clerck. “Coloration and Application of PH-Sensitive Dyes on Textile Materials.” COLORATION TECHNOLOGY, vol. 128, no. 2, 2012, pp. 82–90, doi:10.1111/j.1478-4408.2011.00361.x.

Van der Schueren, Lien, et al. “Polycaprolactone/Chitosan Blend Nanofibres Electrospun from an Acetic Acid/Formic Acid Solvent System.” CARBOHYDRATE POLYMERS, vol. 88, no. 4, 2012, pp. 1221–26, doi:10.1016/j.carbpol.2012.01.085.

De Schoenmaker, Bert, et al. “Electrospun Polyamide 4.6 Nanofibrous Nonwovens: Parameter Study and Characterization.” JOURNAL OF NANOMATERIALS, vol. 2012, 2012, pp. 1–9, doi:10.1155/2012/860654.

Steyaert, Iline, et al. “Blend Electrospinning of Polycaprolactone/Chitosan Nanofibres.” The Fiber Society Spring 2012 Conference : Fiber Research for Tomorrow’s Applications, Abstracts, EMPA, 2012, pp. 55–56.

De Meyer, Thierry, et al. “PH Sensitivity of Azo Dyes.” The Fiber Society Spring 2012 Conference : Fiber Research for Tomorrow’s Applications, Abstracts, EMPA, 2012, pp. 103–04.

Ceylan, Özgür, et al. “A New Tool to Evaluate Reactivity of Novel Bioengineered Cotton Fibers.” The Fiber Society Spring 2012 Conference : Fiber Research for Tomorrow’s Applications, Abstracts, EMPA, 2012, pp. 293–94.

De Schoenmaker, Bert, et al. “The Influence of Polyamide 6 Nanofibres on the Mechanical Properties of Glass Fibre/Epoxy Composites.” 2th International Conference on Electrospinning, Abstracts, Korea Advanced Institute of Science and Technology, Korea, 2012, pp. 6–6.

Daels, Nele, et al. “Performance Assessment of Functionalized Electrospun Nanofibres for Removal of Pathogens.” 2th International Conference on Electrospinning, Abstracts, Korea Advanced Institute of Science and Technology, 2012, pp. 38–38.

Steyaert, Iline, et al. “Blend Electrospinning of Chitosan/Polycaprolactone Nanofibres.” 2th International Conference on Electrospinning, Abstracts, Korea Advanced Institute of Science and Technology, Korea, 2012, pp. 44–44.

De Clerck, Karen, and Stijn Van Hulle. “Nieuws Uit de Vakgroep Textielkunde: Nanovezels Voor Waterfiltratie.” UNITEX : TWEEMAANDELIJKS TIJDSCHRIFT VOOR DE TEXTIELINDUSTRIE, no. 3, 2012, pp. 39–39.

Ceylan, Özgür, et al. “Moisture Sorption in Developing Cotton Fibers.” CELLULOSE, vol. 19, no. 5, 2012, pp. 1517–26, doi:10.1007/s10570-012-9737-x.

Steyaert, Iline, et al. “Blend Electrospinning of Chitosan / Polycaprolacton Nanofibres.” 11th European Symposium on Polymer Blends, Book of Abstracts, Universidad des Pais Vasco, 2012, pp. 75–76.

Steyaert, Iline, et al. “An Alternative Solvent System for Blend Electrospinning of Polycaprolactone/Chitosan Nanofibres.” MACROMOLECULAR SYMPOSIA, vol. 321, no. 1, 2012, pp. 71–75, doi:10.1002/masy.201251111.

De Meyer, Thierry, et al. “The PH-Sensitive Properties of Azo Dyes in Aqueous Environment.” MolSim 2012, Abstracts, 2012.

De Meyer, Thierry, et al. “Investigating the Halochromic Properties of Azo Dyes in an Aqueous Environment by Using a Combined Experimental and Theoretical Approach.” CHEMISTRY-A EUROPEAN JOURNAL, vol. 18, no. 26, 2012, pp. 8120–29, doi:10.1002/chem.201103633.

Ceylan, Özgür, et al. “Dye Absorption Method for the Evaluation of Novel Bioengineered Cotton Fibres.” 7th Central European Conference on Fibre-Grade Polymers, Chemical Fibres and Special Textiles, Proceedings, University of Maribor, 2012, pp. 18–22.

Van der Schueren, Lien, and Karen De Clerck. “Halochromic Textile Materials as Innovative PH-Sensors.” 4th International Conference “SMART Materials, Structures and Systems”, Abstracts, CIMTEC, 2012, pp. 90–90.

Ceylan, Özgür, et al. “Small Scale Dyeing Method to Evaluate Novel Bioengineered Cotton Fibres : A Feasibility Study.” Polymer and Textile Biotechnology, 7th International Conference, Abstracts, edited by Giuliano Freddi, Stazione Sperimentale per la Seta, 2011.

Nierstrasz, Vincent, et al. “NO BUG : Novel Release Systems and Biobased Utilities for Insect Repellent Textiles.” Polymer and Textile Biotechnology, 7th International Conference, Abstracts, edited by Giuliano Freddi, Stazione Sperimentale de la Seta, 2011.

Van der Schueren, Lien, et al. “An Alternative Solvent System for the Steady State Electrospinning of Polycaprolactone.” EUROPEAN POLYMER JOURNAL, vol. 47, no. 6, 2011, pp. 1256–63, doi:10.1016/j.eurpolymj.2011.02.025.

Ciera, Lucy Wanjiru, et al. “NO BUG: Biobased Mosquitoes Repellent Textiles.” Training School “Synthesis of Hybrid Organic-Inorganic Nanoparticles for Innovative Nanostructural Composites”, Abstracts, edited by Francesco Branda, 2011.

De Schoenmaker, Bert, et al. “Wicking Properties of Various Polyamide Nanofibrous Structures with an Optimized Method.” JOURNAL OF APPLIED POLYMER SCIENCE, vol. 120, no. 1, 2011, pp. 305–10, doi:10.1002/app.33117.

De Vrieze, Sander, et al. “Morphologic Study of Steady State Electrospun Polyamide 6 Nanofibres.” JOURNAL OF APPLIED POLYMER SCIENCE, vol. 119, no. 5, 2011, pp. 2984–90, doi:10.1002/app.33036.

Nierstrasz, Vincent, et al. “Novel Release System and Biobased Utilities for Insect Repellent Textiles.” 150 Years of Innovation and Research in Textile Science, Ecole Nationale Supérieure d’Ingénieurs Sud-Alsace (ENSISA), 2011, pp. 846–47.

Daels, Nele, et al. “Potential of a Functionalised Nanofibre Microfiltration Membrane as an Antibacterial Water Filter.” DESALINATION, vol. 275, no. 1–3, 2011, pp. 285–90, doi:10.1016/j.desal.2011.03.012.

Goethals, Annelies, et al. “Electrospun Nanofiber Membranes Functionalized with Antibacterial Particles.” EUROMAT 2011, Abstracts, Société Française de Métallurgie et de Matériaux ; Associazione Italiana di Metallurgia, 2011.

Van der Schueren, Lien, and Karen De Clerck. “PH-Sensitive Textile Sensors with Possible Use as Wound Dressings.” EUROMAT 2011, Abstracts, Société Française de Métallurgie et de Matériaux ; Associazione Italiana di Metallurgia, 2011.

Van der Schueren, Lien, and Karen De Clerck. “PH-Sensitive Textile Materials as Innovative Wound Dressings.” International Conference on Fibrous Products in Medical and Health Care, Proceedings, Tampere University of Technology, 2011, pp. 1–5.

Goethals, Annelies, et al. “Functionalized Nanofiber Membranes for Disinfection of Water.” FiberMed11 : International Conference on Fibrous Products in Medical and Health Care, Tampere University of Technology, 2011.

De Schoenmaker, Bert, and Karen De Clerck. “The Influence of Nanofibres in Composite Materials.” EUROMAT 2011, Abstracts, Société Française de Métallurgie et de Matériaux ; Associazione Italiana di Metallurgia, 2011.

Van der Schueren, Lien, and Karen De Clerck. “An Alternative Solvent System for the Steady State Electrospinning of Polycaprolactone.” Frontiers in Polymer Science, 2nd International Symposium, Programme Book and CD of Abstracts, 2011.

De Schoenmaker, Bert, et al. “Morphology Study of Polyamide 6.9 Nanofibres Electrospun under Steady State Conditions.” Frontiers in Polymer Science, 2nd International Symposium, Programme Book and CD of Abstracts, 2011.

Van der Schueren, Lien, and Karen De Clerck. “Textile Materials with a PH-Sensitive Function.” INTERNATIONAL JOURNAL OF CLOTHING SCIENCE AND TECHNOLOGY, vol. 23, no. 4, 2011, pp. 269–74, doi:10.1108/09556221111136539.

Ceylan, Özgür, et al. “Cone Calorimetry as a Useful Technique for the Screening of Cotton Fibers.” 13th European Meeting on Fire Retardant Polymers, Abstracts, Politecnico di Torino, 2011, pp. 1–2.

Van der Schueren, Lien, and Karen De Clerck. “Nanofibrous Textiles in Medical Applications.” Handbook of Medical Textiles, edited by V Bartels, vol. 100, Woodhead, 2011, pp. 547–66.

Goethals, Annelies, et al. “Functionalised Nanofibre Membranes for Water Filtration.” Conference Book : 6th IWA Specialist Conference on Membrane Technology for Water & Wastewater Treatment, International Water Association (IWA), 2011, pp. 173–74.

Claessens, Michiel, et al. “Occurrence and Distribution of Microplastics in Marine Sediments along the Belgian Coast.” MARINE POLLUTION BULLETIN, vol. 62, no. 10, 2011, pp. 2199–204, doi:10.1016/j.marpolbul.2011.06.030.

Nierstrasz, Vincent, et al. “Novel Insect Repellent Textiles.” Chemistry and Application Fields : Book Summaries, University of Arad, 2010, pp. 5–5.

Van der Schueren, Lien, et al. “The Development of Polyamide 6.6 Nanofibres with a PH-Sensitive Function by Electrospinning.” EUROPEAN POLYMER JOURNAL, vol. 46, no. 12, 2010, pp. 2229–39, doi:10.1016/j.eurpolymj.2010.09.016.

De Schoenmaker, Bert, et al. “Towards Steady State Electrospinning.” Book of Proceedings : Magic World of Textiles : 5th International Textile, Clothing & Design Conference, edited by Zvonko Dragčević, University of Zagreb. Faculty of Textile Technology, 2010, pp. 71–76.

Ceylan, Özgür, et al. “Small Scale Tests to Evaluate Cotton Fibres.” Book of Proceedings : Magic World of Textiles : 5th International Textile, Clothing & Design Conference, edited by Zvonko Dragčević, University of Zagreb. Faculty of Textile Technology, 2010, pp. 566–69.

Van der Schueren, Lien, and Karen De Clerck. “Kleurvariërende Materialen Als Nieuwe Textielsensoren.” UNITEX. TWEEMAANDELIJKS TIJDSCHRIFT VOOR DE TEXTIELINDUSTRIE, no. 2010 / 5, Unitex vzw, 2010, pp. 40–40.

Daels, Nele, et al. “Performance Assessment of Functionalized Electrospun Nanofibres for Removal of Pathogens.” European Meeting on Chemical Industry and Environment, 6th, Proceedings, edited by Raf Dewil et al., University College Lessius Mechelen, 2010.

Daels, Nele, et al. “Performance Assessment of Functionalized Electrospun Nanofibres for Removal of Pathogens.” Membranes in Drinking and Industrial Water Treatment, Proceedings, International Water Association (IWA), 2010.

Daels, Nele, et al. “Performance Assessment of Functionalized Electrospun Nanofibres for Removal of Pathogens.” IWA World Water Congress, 7th, Proceedings, International Water Association (IWA), 2010.

De Vrieze, Sander, et al. “Reproducible Polyamide Nanofibers for Water Filtration.” ElectroSpin 2010 : Program and Abstracts, CSIRO Materials Science and Engineering, 2010, pp. 25–25.

De Vrieze, Sander, et al. “Solvent System for Steady State Electrospinning of Polyamide 6.6.” JOURNAL OF APPLIED POLYMER SCIENCE, vol. 115, no. 2, 2010, pp. 837–42, doi:10.1002/app.30331.

Decostere, Bjorge, et al. “Initial Testing of Electrospun Nanofibre Filters in Water Filtration Applications.” WATER SA, vol. 36, no. 1, 2010, pp. 151–55.

De Schoenmaker, Bert, et al. “Influence of the Polyamide Type and Fibre Diameter on the Wicking Height in Nanofibrous Structures.” International Technical Textiles Congress, 4th, Proceedings, edited by Merih Sariisik and Gülseren Karabay, Dokuz Eylül University. Department of Textile Engineering, 2010.

Van der Schueren, Lien, and Karen De Clerck. “The Road to a Unique Textile Material: Nanofibres with a PH-Sensitive Function.” International Technical Textiles Congress, 4th, Proceedings, edited by Merih Sariisik and Gülseren Karabay, Dokuz Eylül University. Department of Textile Engineering, 2010.

De Vrieze, Sander, et al. “Steady State Electrospun Polyamide Nanofibres for the Use in MBR.” International Technical Textiles Congress, 4th, Proceedings, edited by Merih Sariisik and Gülseren Karabay, Dokuz Eylül University. Department of Textile Engineering, 2010.

Ceylan, Özgür, et al. “Small-Scale Tests for Characterisation of Bioengineered Cotton Fibres.” Fiber Society 2010 Spring Conference Proceedings, edited by Yusuf Ulcay, The Fiber Society, 2010, pp. 101–02.

De Vrieze, Sander, et al. “A New Look on Nanofibrous Nonwovens.” Fiber Society 2010 Spring Conference Proceedings, edited by Yusuf Ulcay, The Fiber Society, 2010, pp. 47–48.

Van der Schueren, Lien, and Karen De Clerck. “The Use of PH-Indicator Dyes for PH-Sensitive Textile Materials.” TEXTILE RESEARCH JOURNAL, vol. 80, no. 7, 2010, pp. 590–603, doi:10.1177/0040517509346443.

Ceylan, Özgür, et al. “The Search for Superior Cotton Fibres of the Future: Novel Small Scale Tests Needed Today.” IFATCC International Congress, 22nd, Proceedings, edited by Alessandro Gigli, Associazione Italiana di Chimica Tessile e Coloristica (AICTC), 2010.

Van der Schueren, Lien, and Karen De Clerck. “The Development of an Innovative PH-Sensor Based on Colour Changing Textiles.” IFATCC International Congress, 22nd, Proceedings, edited by Alessandro Gigli, Associazione Italiana di Chimica Tessile e Coloristica (AICTC), 2010.

Daels, Nele, et al. “Functionalised Electrospun Nanofibres for Removal of Pathogens.” Flemish Youth Conference of Chemistry, 10th, Abstracts, Koninklijke Vlaamse Chemische Vereniging. Jongerensectie, 2010.

Daels, Nele, et al. “The Use of Electrospun Flat Sheet Nanofibre Membranes in MBR Applications.” DESALINATION, vol. 257, no. 1–3, 2010, pp. 170–76, doi:10.1016/j.desal.2010.02.027.

De Schoenmaker, Bert, et al. “Wicking Properties of Polyamide Nanofibrous Structures.” World Textile Conference, 10th, Proceedings, AUTEX, 2010.

Nierstrasz, Vincent, et al. “Novel Release System and Biobased Utilities for Insect Repellent Textiles.” Book of Abstracts : AUTEX 2010, 10th World Textile Conference, AUTEX, 2010, pp. 173–173.

De Vrieze, Sander, et al. “The Effect of Temperature and Humidity on Electrospinning.” JOURNAL OF MATERIALS SCIENCE, vol. 44, no. 5, Springer, 2009, pp. 1357–62, doi:10.1007/s10853-008-3010-6.

Van Langenhove, Lieva, et al. “Electrospinning at UGent.” AITEX Info Day, Presentations, 2009, pp. 1–13.

Van Langenhove, Lieva, et al. “No Bug: Novel Release System and Bio-Based Utilities for Mosquito Repellent Textiles and Garments.” From EU Research to Industrial Innovation, Presentations, EURATEX ; European Technology Platform for the Future of Textiles and Clothing, 2009, pp. 1–8.

Ceylan, Özgür, et al. “Novel Tests for Dyeing and Characterisation of Small Amounts of Cotton Fibre.” Autex 2009 : Book of Abstracts, Ege University. Department of Textiel engineering, 2009, pp. 1033–35.

Van der Schueren, Lien, and Karen De Clerck. “Color Change Textile Materials: A Feasibility Study on the Use of PH-Indicator Dyes in Textile PH-Sensors.” International Conference on Latest Advances in High-Tech Textiles and Textile-Based Materials, Proceedings, edited by Paul Kiekens, Ghent University. Department of Textiles, 2009, pp. 38–40.

De Vrieze, Sander, and Karen De Clerck. “80 Years of Electrospinning.” International Conference on Latest Advances in High-Tech Textiles and Textile-Based Materials, Proceedings, edited by Paul Kiekens, Ghent University. Department of Textiles, 2009, pp. 60–63.

Decostere, Bjorge, et al. “Performance Assessment of Electrospun Nanofibres for Filter Applications.” DESALINATION, vol. 249, no. 3, 2009, pp. 942–48, doi:10.1016/j.desal.2009.06.064.

De Vrieze, Sander, et al. “Nanofibrous Structures for Use in Water Filtration.” UNITEX. TWEEMAANDELIJKS TIJDSCHRIFT VOOR DE TEXTIELINDUSTRIE, no. 2009 / 2, Unitex vzw, 2009, pp. 7–10.

Daels, Nele, et al. “Performance Assessment of Functionalized Electrospun Nanofibres for Removal of Pathogens.” IWA BeNeLux Regional Young Water Professionals Conference, 1st, Abstracts, 2009.

Morent, Rino, et al. “Non-Thermal Plasma Treatment of Textiles.” SURFACE & COATINGS TECHNOLOGY, vol. 202, no. 14, 2008, pp. 3427–49, doi:10.1016/j.surfcoat.2007.12.027.

Van Nimmen, Els, et al. “FT-IR Spectroscopy of Spider and Silkworm Silks, Part I : Different Sampling Techniques.” VIBRATIONAL SPECTROSCOPY, vol. 46, no. 1, 2008, pp. 63–68.

De Vrieze, Sander, et al. “Electrospinning: The Road to a New Class of Materials?” Textiles of the Future, 2008.

De Vrieze, Sander, et al. “Poster: The Effect of Temperature and Humidity on Electrospinning.” Biella - Italy : Proceedings of the 8th Autex Conference, 2008.

Kiekens, Paul, et al. “Electrospinning Based Nanofibrous Structures for Water Filtration.” Biella - Italy : Proceedings of the 8th Autex Conference, 2008.

De Vrieze, Sander, et al. “Characterization of Nanofibrous Material.” Biella - Italy ; Proceedings of the 8th Autex Conference, 2008.

Decostere, Bjorge, et al. “Waterfiltratie Met Electrogesponnen Nanovezels.” AFVALWATERWETENSCHAP, vol. 7, no. 4, 2008, pp. 17–28.

De Clerck, Karen, and Paul Kiekens. “Variations in Dyeing Characteristics for PET-Fibres: The Effect of Dye-Fibre Interactions.” IFATCC International Congress, 21st, Proceedings, International Federation of Associations of Textile Chemists and Colorists (IFATCC), 2008.

Decostere, Bjorge, et al. “Analyse van de Performantie van Nanovezels Voor Waterfiltratie.” Congres Water En Klimaatverandering, Proceedings, 2008.

Decostere, Bjorge, et al. “Performance Assessment of Electrospun Nanofibres for Filter Applications.” Membrane Symposium and 12th Poster Day Membrane Technology, Abstracts, 2008.

Matemadombo, Fungisai, et al. “Immobilization of Tetra-Amine Substituted Metallophthalocyanines at Gold Surfaces Modified with Mercaptopropionic Acid or DTSP-SAMs.” ELECTROCHIMICA ACTA, vol. 52, no. 5, Elsevier, 2007, pp. 2024–31, doi:10.1016/j.electacta.2006.08.027.

St. Laurent, JB, et al. “Laundry Cleaning of Textiles.” Handbook for Cleaning/Decontamination of Surfaces, edited by Ingegard Johansson and P Somasundaran, Elsevier, 2007.

De Clerck, Karen, et al. “Dye-Fiber Interactions in PET Fibers: Hydrogen Bonding Studied by IR-Spectroscopy.” JOURNAL OF APPLIED POLYMER SCIENCE, vol. 106, no. 3, JOHN WILEY & SONS INC, 2007, pp. 1648–58.

Bolhová, E., et al. “Influence of the Poly (Trimethylene Terephthalate) Phase Distribution on the Dyeing of Polypropylene/Poly (Trimethylene Terephthalate) Bicomponent Fibres.” VLAKNA A TEXTIL, vol. 13, no. 1–2, 2006, pp. 16–22.

Ujhelyiova, A., et al. “The Influence of PES on the Dye Distribution in Blend Polypropylene/Polyester Fibres.” Textile, Clothing and Design Conference, 3rd International, Proceedings, 2006, pp. 360–65.

De Clerck, Karen, et al. “DYE DIFFUSION STUDIES BY CONFOCAL LASER SCANNING MICROSCOPY.” Proceedings of the INTERNATIONAL FIBER CONFERENCE 2006, THE FIBER SOCIETY, 2006, pp. 183–84.

Akbarov, Djamal, et al. “Development of Electroconductive Polyacrylonitrile Fibers through Chemical Metallization and Galvanisation.” JOURNAL OF APPLIED ELECTROCHEMISTRY, vol. 36, no. 4, Springer, 2006, pp. 411–18, doi:10.1007/s10800-005-9085-8.

Westbroek, Philippe, et al. “Quality Control of Textile Electrodes by Electrochemical Impedance Spectroscopy.” TEXTILE RESEARCH JOURNAL, vol. 76, no. 2, Sage Publications ltd, 2006, pp. 152–59, doi:10.1177/0040517506053911.

GASANA, E., et al. “Electroconductive Textile Structures through Electroless Deposition of Polypyrrole and Copper at Polyaramide Surfaces.” SURFACE & COATINGS TECHNOLOGY, vol. 201, no. 6, ELSEVIER SCIENCE SA, 2006, pp. 3547–51.

De Clerck, Karen, et al. “Variations in Diffusion Coefficient of Disperse Dyes in Single PET Fibres: Monitored and Interpreted by Confocal Laser Scanning Microscopy.” POLYMER, vol. 46, no. 1, 2005, pp. 101–08, doi:10.1016/j.polymer.2004.10.074.

AKBAROV, D., et al. “Optimizing Process Parameters in Polyacrylonitrile Production for Metallization with Nickel.” TEXTILE RESEARCH JOURNAL, vol. 75, no. 3, TEXTILE RESEARCH INST, 2005, pp. 197–202.

Verschuren, Johan, et al. “Influence of Fiber Surface Purity on Wicking Properties of Needle-Punched Nonwoven after Oxygen Plasma Treatment.” TEXTILE RESEARCH JOURNAL, vol. 75, no. 5, TEXTILE RESEARCH INST, 2005, pp. 437–41.

Schoukens, Gustaaf, and Karen De Clerck. “Thermal Analysis and Raman Spectroscopic Studies of Crystallization in Poly(Ethylene 2,6-Naphthalate).” POLYMER, vol. 46, no. 3, ELSEVIER SCI LTD, 2005, pp. 845–57.

De Clerck, Karen, et al. “Dye Diffusion Studies in PET Fibres by Confocal Laser Scanning Microscopy and the Interrelation with the Glass Transition.” POLYMER, vol. 45, no. 12, 2004, pp. 4105–12, doi:10.1016/j.polymer.2004.03.103.

AKBAROV, D., et al. “Metallization of Synthetic Fibres: Nickel Absorbed Polyacrylonitrile Fibers.” World Textile Conference - 4th Autex Conference, ENSAIT, 2004.

Westbroek, Philippe, et al. “Improving Quality and Reproducibility of the Indigo Dye Process by Measuring and Controlling Indigo and Sodium Dithionite Concentrations.” TEXTILE RESEARCH JOURNAL, vol. 73, no. 12, 2003, pp. 1079–84.

GASANA, E., et al. “Kinetics and Mechanism of the Oxidation of Sodium Dithionite at a Platinum Electrode in Alkaline Solution.” JOURNAL OF ELECTROANALYTICAL CHEMISTRY, vol. 553, 2003, pp. 35–42.

De Clerck, Karen, et al. “A Study of the Thermal Properties of PET Fibres with Relevance to the Dye Diffusion Process.” Proceedings of the 3rd CEC Conference, 2003.

De Clerck, Karen, et al. “Thermal Properties Relevant to the Processing of PET Fibers.” JOURNAL OF APPLIED POLYMER SCIENCE, vol. 89, no. 14, JOHN WILEY & SONS INC, 2003, pp. 3840–49.

De Clerck, Karen, et al. “Interrelation between Dyeing and Thermal Properties of PET Fibers.” JOURNAL OF APPLIED POLYMER SCIENCE, vol. 90, no. 1, JOHN WILEY & SONS INC, 2003, pp. 105–14.

De Clerck, Karen, et al. “The Dyeing of PET Fibres, a Fundamental Analysis.” 2nd Autex Conference : Textile Engineering at the Dawn of a New Millenium, Bruges, Belgium, 1-3 July, 2002, p.161-173, 2002.

De Clerck, Karen, and Paul Kiekens. “Het Verven van Conventionele PET-Weefsels En PET-Microvezelweefsels : Een Fundamentele Analyse.” UNITEX. TWEEMAANDELIJKS TIJDSCHRIFT VOOR DE TEXTIELINDUSTRIE, no. 2002 / 2, Unitex vzw, 2002, pp. 57–57.

De Clerck, Karen, and Paul Kiekens. “The Colour Build-up of PET Microfibre Fabrics: A Reinvestigation of the Problem and Possible Causes.” Fibres and Textiles for the Future, Proceedings, 2001, pp. 83–90.

Kiekens, Paul, and Karen De Clerck. “An Introduction into the Dyeing of Polyester Microfibres.” Proceedings of “Vllth International IZMIR Textile and Apparel Symposium”, 19-23 April Pp. F161-F166, 1996.

De Clerck, Karen, et al. “Investigation into the Dyeing of Polyester Microfibres, State of the Art and Possible New Perspectives: E.g. the Use of Confocal Laser Scanning Microscopy.” IFVTCC Congress, 17th, Proceedings, International Federation of the Associations of the Textile Chemists and Colourists / Internationale Föderation der Vereinigungen der Textilchemiker und  Coloristen (IFVTCC), 1996, pp. 201–03.

De Clerck, Karen, et al. “Investigation into the Dyeing of Polyester Microfibres, State of the Art and Possible New Perspectives: E.g. the Use of Confocal Laser Scanning Microscopy.” Joint Meeting Belgische Vereniging Voor Microscopie / Nederlandse Vereniging Voor Microscopie, Proceedings, Belgische Vereniging voor Microscopie ; Nederlandse Vereniging voor Microscopie, 1996.

De Clerck, Karen, et al. “Investigation into the Dyeing of Polyester Microfibres, State of the Art and Possible New Perspectives: E.g. the Use of Confocal Laser Scanning Microscopy.” Proceedings 17th IFVTCC Congres, 1996, pp. 201–03.

De Clerck, Karen, et al. Investigation into the Dyeing of Polyester Microfibres, State of the Art and Possible New Perspectives: E.g. the Use of Confocal Laser Scanning Microscopy. Belgische Vereniging voor Microscopie/Nederlandse Vereniging voor Microscopie, 1996.

De Clerck, Karen, et al. “Novel Dyebath Treatments for the Prevention of Increased Hygral Expansion Occurring in Piece Dyed Worsted Fabrics.” JOURNAL OF THE TEXTILE INSTITUTE, vol. 84, no. 4, 1993, pp. 611–18.