prof. dr. ir. Geert De Schutter
- ORCID iD
- 0000-0001-5603-2616
Show
Sort by
-
- Journal Article
- A1
- open access
Interfacial bonding of 3D printable concrete with chemically reactive coating for automatic repair
-
Adhesion evaluation and interface characterization of 3D printed concrete for automatic repair
-
A comparison of magneto-responsive particles and testing protocols for active rheology control of cementitious materials
-
Early-age shrinkage assessment of cementitious materials : a critical review
-
Novel concrete superplasticizers with sterically hindered amines as stabilizing pendant side chains
-
Smart superplasticizers based on redox-responsive polymers for rheology control of cementitious materials
-
- Journal Article
- open access
Novel concrete superplasticizers containing crown ether pendant side chains for improved cement paste workability
-
Geometric Conformability of 3D Concrete Printing Mixtures from a Rheological Perspective
-
Influence of retarders on the hydration and rheology of calcium sulfo aluminate cement
-
- Conference Paper
- C1
- open access
Adhesion studies in view of automated repair using 3D concrete printing
-
Assessment of early-age drying induced microstructural changes in 3D printed cement mortar
-
- Journal Article
- A1
- open access
The effect of curing conditions on the service life of 3D printed concrete formwork
-
Influence of rheology on mixing homogeneity and mechanical behavior of twin-pipe 3D printable concrete
-
Set-on-demand of alkali-activated slag mixture using twin-pipe pumping
-
Enhancing mechanical performance of twin-pipe printable concrete using a binary binder system
-
- Journal Article
- A1
- open access
Twin-pipe pumping strategy for stiffening control of 3D printable concrete : from transportation to fabrication
-
Rheological and mechanical properties of 3D printable alkali-activated slag mixtures with addition of nano clay
-
- Journal Article
- A1
- open access
Characterisation of alkali-activated stainless steel slag and blast-furnace slag cements
-
- Journal Article
- A1
- open access
Evaluation of copper slag and stainless steel slag as replacements for blast furnace slag in binary and ternary alkali-activated cements
-
Interlayer bond and porosity of 3D printed concrete
-
Comparison of printability and mechanical properties of rigid and flexible fiber-reinforced 3D printed cement-based materials
-
Assessment of pore structure characteristics and tortuosity of 3D printed concrete using mercury intrusion porosimetry and X-ray tomography
-
- Journal Article
- A1
- open access
Extending 3D concrete printing to hard rock tunnel linings : adhesion of fresh cementitious materials for different surface inclinations
-
- Journal Article
- A1
- open access
Development of a calcium sulfoaluminate-Portland cement binary system for twin-pipe 3D concrete printing
-
- Journal Article
- A1
- open access
The evolution of the rheological behavior of hydrating cement systems : combining constitutive modeling with rheometry, calorimetry and mechanical analyses
-
- Journal Article
- A1
- open access
Recent progress and technical challenges in using calcium sulfoaluminate (CSA) cement
-
- Book Chapter
- open access
Active rheology control of cementitious materials with responsive polymers
-
- Journal Article
- A1
- open access
Responsive superplasticizers for active rheology control of cementitious materials
-
3D printed concrete as stay‐in‐place formwork : mechanics during casting and curing
-
Mix design insights for printable mortars based on structural build-up rate requirements
-
Structural build-up rate evaluation of printable mortars with CSA cement substitutions
-
- Conference Paper
- C3
- open access
Rheology design principles for 3D concrete printing
-
Transport properties of 3D printed concrete elements
-
Mechanical behavior of twin-pipe printed concrete
-
- Conference Paper
- C1
- open access
Adhesive properties of fresh cementitious materials as measured by the tack test
-
- Book Chapter
- open access
Properties and testing of printed cement-based materials in hardened state
-
- Conference Paper
- C1
- open access
Influence of the print process on the durability of printed cementitious materials
-
Using limestone powder as a carrier for the accelerator in extrusion-based 3D concrete printing
-
Evaluation of the bond strength between 3D printed and self-compacting concrete
-
Salt scaling resistance of 3D printed concrete
-
Effect of high-range water-reducing admixtures on alkali-activated slag concrete
-
Blending performance of helical static mixer used for twin-pipe 3D concrete printing
-
- Conference Paper
- C3
- open access
The shear strength of the interface between rock and printable concrete at super-young ages
-
- Conference Paper
- C3
- open access
Multiscale characteristics of layer interface in 3D printed cement-based materials
-
Stiffening controllable concrete modified with redispersible polymer powder for twin-pipe printing
-
Comparative study on the role of PAM and PANA on the property of fresh cement paste
-
Effect of steel fiber distribution on the mechanical properties of UHPC caused by vehicle-bridge coupling vibration
-
Synthesis and characterization of an intermediate for C-S-H structure tailoring
-
- Journal Article
- A1
- open access
Fresh and hardened properties of alkali-activated slag concrete : the effect of fly ash as a supplementary precursor
-
Rheological properties of concrete with manufactured sand : a multi-level prediction
-
- Journal Article
- A1
- open access
Effect of solid volume fraction on the magnetorheological response of nano-Fe3O4 incorporated cementitious paste
-
Hydration re-initiation of borated CSA systems with a two-stage mixing process : an application in extrusion-based concrete 3D printing
-
- Journal Article
- A1
- open access
Rheology and structural build-up of sodium silicate- and sodium hydroxide-activated GGBFS mixtures
-
Influence of aluminum sulfate on mobility and adhesion of hydroxyethyl methyl cellulose in cement-based materials for tunnel linings
-
A roadmap for quality control of hardening and hardened printed concrete
-
Insights in the chemical fundamentals of ASR and the role of calcium in the early stage based on a 3D reactive transport model
-
- Journal Article
- A1
- open access
Magneto-responsive structural build-up of highly flowable cementitious paste in the presence of PCE superplasticizer
-
Identification of multi-scale homogeneity of blended cement concrete : macro performance, micro and meso structure
-
Pumping of concrete : understanding a common placement method with lots of challenges
-
Evaluation of rheology and strength development of alkali-activated slag with different silicates sources
-
Influence of substrate surface roughness and moisture content on tensile adhesion performance of 3D printable concrete
-
- Journal Article
- A1
- open access
Rheology and microstructure of alkali-activated slag cements produced with silica fume activator
-
A 3D reactive transport model for simulation of the chemical reaction process of ASR at microscale
-
- Journal Article
- A1
- open access
Early structural build-up, setting behavior, reaction kinetics and microstructure of sodium silicate-activated slag mixtures with different retarder chemicals
-
Shape stability of 3D printable concrete with river and manufactured sand characterized by squeeze flow
-
- Journal Article
- A1
- open access
Early age reaction, rheological properties and pore solution chemistry of NaOH-activated slag mixtures
-
- Journal Article
- A1
- open access
Degradation of concrete in marine environment under coupled chloride and sulfate attack : a numerical and experimental study
-
A review : reaction mechanism and strength of slag and fly ash-based alkali-activated materials
-
The production of a topology-optimized 3D-printed concrete bridge
-
A mix design methodology of slag and fly ash-based alkali-activated paste
-
Rheology of alkali-activated slag pastes : new insight from microstructural investigations by cryo-SEM
-
Transport properties of 3D printed cementitious materials with prolonged time gap between successive layers
-
Mechanical and microstructural properties of 3D printable concrete in the context of the twin-pipe pumping strategy
-
Performance criteria, environmental impact and cost assessment for 3D printable concrete mixtures
-
- Journal Article
- A1
- open access
Magneto-rheology control in 3D concrete printing : a rheological attempt
-
3D printable concrete with natural and recycled coarse aggregates : rheological, mechanical and shrinkage behaviour
-
Understanding the Structural Build-Up Rate of Cementitious Materials for 3D-Printing
-
Drying shrinkage and swelling of 3D printed concrete stay-in-place formwork
-
Influence of accelerator on the pore structure of 3D printable concrete
-
- Journal Article
- A1
- open access
Adhesion properties of printable polymer-modified concrete for rock tunnel linings
-
- Journal Article
- A1
- open access
Rheology, early-age hydration and microstructure of alkali-activated GGBFS-Fly ash-limestone mixtures
-
Experimental study on concurrent factors influencing the ITZ effect on mass transport in concrete
-
- Journal Article
- A1
- open access
Experimental investigation for modeling the hardening of thermosetting polymers during curing
-
- Journal Article
- A1
- open access
Numerical reliability study based on rheological input for Bingham paste pumping using a finite volume approach in OpenFoam
-
- Journal Article
- A1
- open access
Effect of Ca(OH)(2) addition on the engineering properties of sodium sulfate activated slag
-
- Journal Article
- A1
- open access
Development of 3D printable cementitious composites with the incorporation of polypropylene fibers
-
The improvement of freezing-thawing resistance of concrete by cellulose/polyvinyl alcohol hydrogel
-
Prediction of compressive strength of concrete with manufactured sand by ensemble classification and regression tree method
-
Plastic viscosity of cement mortar with manufactured sand as influenced by geometric features and particle size
-
- Journal Article
- A1
- open access
Active stiffening control by magnetically induced blocking in confined flow of fly ash pastes
-
- Journal Article
- A1
- open access
Flow behavior of cementitious-like suspension with nano-Fe3O4 particles under external magnetic field
-
- Journal Article
- A1
- open access
Possibilities of fly ash as responsive additive in magneto-rheology control of cementitious materials
-
Enhancing thixotropy and structural build-up of alkali-activated slag/fly ash pastes with nano clay
-
- Journal Article
- A1
- open access
Thixotropic structural build-up of cement-based materials : a state-of-the-art review
-
- Journal Article
- A1
- open access
3D microstructure simulation of reactive aggregate in concrete from 2D images as the basis for ASR simulation
-
- Conference Paper
- C3
- open access
3DXRD : a novel application for characterization of ice crystallization in pores
-
- Journal Article
- A1
- open access
Rheological behavior of cement paste with nano-Fe3O4 under magnetic field : magneto-rheological responses and conceptual calculations
-
Determination of specific surface area of irregular aggregate by random sectioning and its comparison with conventional methods
-
- Journal Article
- A1
- open access
Structural evolution of cement paste with nano-Fe3O4 under magnetic field : effect of concentration and particle size of nano-Fe3O4
-
Stiffening control of cement-based materials using accelerators in inline mixing processes : possibilities and challenges