prof. dr. ir. Ingmar Nopens
Show
Sort by
-
Coupling mechanistic and data-driven models by means of neural differential equations to incorporate unmodeled dynamics
-
- Conference Paper
- C3
- open access
Flowsheet modeling of the compression step of a continuous wet granulation production line
(2019) -
- Conference Paper
- C3
- open access
Validation of a generic steady state model for full-scale Reverse Osmosis
-
- Conference Paper
- C3
- open access
Modelling of underlimiting and overlimiting current transport in electrodialysis : challenges and opportunities
-
- Conference Paper
- C3
- open access
Integrated ecological modelling for water management in the urbanized area of the Cuenca River basin (Ecuador)
-
Compartmental modelling in chemical engineering : a critical review
-
Modelling gas-liquid mass transfer in wastewater treatment : when current knowledge needs to encounter engineering practice and vice versa
-
Non-ideal mixing model of anaerobic digestion : linking the CFD model and ADM1
-
DSS/FSS testing for high-rate activated sludge : critical protocol considerations and flocculation differences in two full-scale systems
-
Fast pyrolysis of polyethylene in the gas-solid vortex reactor
-
Tanks in series versus compartmental model configuration : considering hydrodynamics helps in parameter estimation for an N2O model
-
Two-compartment modeling and dynamics of top-sprayed fluidized bed granulator
-
Investigating pervaporation for in situ acetone removal as process intensification tool in ω-transaminase catalyzed chiral amine synthesis
-
Process control levels for continuous pharmaceutical tablet manufacturing
-
The impact of intermediate-head navigation locks on downstream fish passage
-
Towards a detailed understanding of oxygen transfer in wastewater treatment : the effect of bubble size.
-
- Conference Paper
- C3
- open access
Model-based investigation of the performance of a novel aeration system in the Dommel river
-
- Conference Paper
- C1
- open access
Plant-wide optimization through dynamic compartmental modelling and analysis of limiting processes
-
Modelling the rheology of fresh cement pastes : a population balance approach
-
Towards a generic model for twin-screw wet granulation
-
Modeling of semicontinuous fluid bed drying of pharmaceutical granules with respect to granule size
-
- Journal Article
- A1
- open access
Dynamic flowsheet model development and sensitivity analysis of a continuous pharmaceutical tablet manufacturing process using the wet granulation route
-
On the modelling of granule size distributions in twin-screw wet granulation : calibration of a novel compartmental population balance model
-
Investigation of the distributed settling behaviour of high- rate activated sludge using the multi-class settling model
-
Heat transfer evaluation during twin-screw wet granulation in view of detailed process understanding
-
- Conference Paper
- C3
- open access
Plant-wide optimization through dynamic Compartmental Modeling and analysis of limiting processes
-
Data mining application in assessment of weather-based influent scenarios for a WWTP : getting the most out of plant historical data
-
Impact evaluation of wet-weather events on influent flow and loadings of a water resource recovery facility
-
Data scarcity in modelling and simulation of a large-scale WWTP : stop sign or a challenge
-
Computational fluid dynamics validation study of an axial flow impeller often used in anaerobic digesters
-
Modelling the rheology of fresh cement pastes : a population balance approach
-
- Conference Paper
- C1
- open access
Validation of a generic steady state model for full-scale reverse osmosis
-
Kernel mean embedding of distributions : a new data-driven model approach for modelling a continuous pharmaceutical twin-screw granulation process
-
Population balance modelling for twin-screw wet granulation : insight in the notion of distance between distributions and the need for identifiable models for good model predictive power
-
Combining jar tests and CFD to investigate the role of local hydrodynamics in flocculation of high-rate activated sludge
-
Towards fouling resistant electrodialysis : a model-based approach
-
The relevance of shear, sedimentation and diffusion during spin freezing, as potential first step of a continuous freeze-drying process for unit doses
-
- Conference Paper
- C1
- open access
Fish behaviour in the vicinity of a navigation lock complex : the challenges
-
- Journal Article
- A1
- open access
A novel high-throughput method for kinetic characterisation of anaerobic bioproduction strains, applied to Clostridium kluyveri
-
Techno-economic assessment of surrogate-based real-time control and monitoring of secondary effluent ozonation at pilot scale
-
- Conference Paper
- C3
- open access
Model-based analysis of the potential of macroinvertebrates as indicators for microbial pathogens in rivers
-
Good modelling practice for process engineering : pitfalls and requirements to develop fit for purpose models
-
Dynamic validation of online applied and surrogate-based models for tertiary ozonation on pilot-scale
-
Municipal wastewater effluent characterization and variability analysis in view of an ozone dose control strategy during tertiary treatment : the status in Belgium
-
Impact of a helical ridge within a tubular membrane channel on fluid flow and particle behaviour : a model-based analysis
-
Towards improved carbon recovery in high-rate activated sludge systems : unravelling flocculation behaviour
-
Compartmental modelling in a plant-wide context : exploration and potential
-
Mixing : new insights and opportunities through computational fluid dynamics
-
Resource recovery and advanced CFD : a required marriage
-
Breakage and drying behaviour of granules in a continuous fluid bed dryer : influence of process parameters and wet granule transfer
-
Model development and prediction of particle size distribution, density and friability of a comilling operation in a continuous pharmaceutical manufacturing process
-
Understanding the effects of bulk mixing on the determination of the affinity index : consequences for process operation and design
-
Towards improved accuracy in modeling aeration efficiency through understanding bubble size distribution dynamics
-
- Conference Paper
- C3
- open access
Pure breakage PBM calibration in pharmaceutical wet granulation
-
Impact of a helical ridge within a tubular membrane channel on fluid flow and particle behavior : a model-based analysis
-
Towards a compartmental PBM for improved modelling of flocculation in high-rate activated sludge systems
-
- Conference Paper
- C3
- open access
On the identifiability of kernels for Population Balance Modelling
-
Integrated artificial intelligence and mathematical modelling for online supervision and control of water resource recovery facilities
-
- Conference Paper
- C3
- open access
Fish behaviour at navigation locks
-
- Conference Paper
- C3
- open access
Modelling of an anaerobic packed bed reactor used in processing of sugarcane vinasse to recover hydrogen using the anaerobic digestion model number 1
-
Proof of concept CFD study of polystyrene pyrolysis in a gas-solid vortex reactor
-
- Journal Article
- A1
- open access
Mathematical modelling and simulation of a spray fluidized bed granulator
-
Model-based NIR spectroscopy implementation for in-line assay monitoring during a pharmaceutical suspension manufacturing process
-
An open software package for data reconciliation and gap filling in preparation of Water and Resource Recovery Facility Modeling
-
Developing a framework to model the primary drying step of a continuous freeze-drying process based on infrared radiation
-
Potential of near-infrared chemical imaging as process analytical technology tool for continuous freeze-drying
-
Solution of bivariate aggregation population balance equation : a comparative study
-
Global Sensitivity Analysis as Good Modelling Practices tool for the identification of the most influential process parameters of the primary drying step during freeze-drying
-
Model calibration and validation of a full-scale reverse osmosis process
-
- Journal Article
- A1
- open access
Model-based analysis of the potential of macroinvertebrates as indicators for microbial pathogens in rivers
-
- Journal Article
- A1
- open access
A comparative study of numerical approximations for solving the Smoluchowski coagulation equation
-
Liquid-to-solid ratio control as an advanced process control solution for continuous twin-screw wet granulation
-
Control of three different continuous pharmaceutical manufacturing processes : use of soft sensors
-
Biological impact assessment of sewage outfalls in the urbanized area of the Cuenca River basin (Ecuador) in two different seasons
-
Mixing analysis of a non-Newtonian fluid stirred with a hydrofoil impeller : particle image velocimetry vs computational fluid dynamics
-
A population balance based rheological model for fresh cement paste
-
- Journal Article
- A1
- open access
Multi-point monitoring of nitrous oxide emissions in three full-scale conventional activated sludge tanks in Europe
-
Technical and economic assessment of real-time control strategies for micropollutant removal by ozonation at pilotscale
-
Technical and economic assessment of real-time control strategies for micropollutant removal by ozonation at pilot-scale
-
Twin-screw granulation process development: present approaches, understanding and needs
-
- Conference Paper
- P1
- open access
Multi-point monitoring of nitrous oxide emissions and aeration efficiency in a full-scale conventional activated sludge tank
-
Evaluation of the impact of wet-weather events on Influent Flow and Loading of Water Resource Recovery Facility
-
- Conference Paper
- C3
- open access
Towards improved solid-liquid separation in High Rate Activated Sludge systems by unravelling flocculation behaviour
-
Model-based optimisation of design and operation of bioreactors with a focus on gas-liquid mass transfer
-
- Conference Paper
- C3
- open access
Towards a general model for twin-screw wet granulation : application of a novel validated PBM model to a hydrophilic compound and linking model parameters to blend properties
-
- Journal Article
- A1
- open access
A methodology to model environmental preferences of EPT taxa in the Machangara River Basin (Ecuador)
-
On constitutive functions for hindered settling velocity in 1-D settler models : selection of appropriate model structure
-
Full-scale direct contact membrane distillation (DCMD) model including membrane compaction effects
-
Towards advanced aeration modelling : from blower to bubbles to bulk
-
Concentration-driven models revisited : towards a unified framework to model settling tanks in water resource recovery facilities
-
- Journal Article
- A1
- open access
Elucidation and visualization of solid-state transformation and mixing in a pharmaceutical mini hot melt extrusion process using in-line Raman spectroscopy
-
- Conference Paper
- C3
- open access
A dynamic model for reverse osmosis as part of decision support tool for water fit-for-use
-
- Conference Paper
- C3
- open access
Spatio-temporal modelling of filter cake formation in filtration processes
-
- Conference Paper
- C3
- open access
Acoustic positioning telemetry in reflective environments : a practical guidance for error analysis
-
- Conference Paper
- C3
- open access
Eel behaviour at navigation locks : finding the true path in acoustic telemetry data
-
Application of iterative robust model-based optimal experimental design for the calibration of biocatalytic models
-
- Conference Paper
- C3
- open access
Visualization of compaction behavior of pharmaceutical powders in solid-dosage manufacturing using finite element analysis
-
- Conference Paper
- C3
- open access
Kinetic model of hexanoic acid production by Clostridium kluyveri shows product toxicity even at neutral pH
-
- Conference Paper
- C3
- open access
Kinetic model of hexanoic acid production by Clostridium kluyveri shows product toxicity even at neutral pH
-
Surrogate-based correlation models in view of real-time control of ozonation of secondary treated municipal wastewater-model development and dynamic validation