prof. dr. Kim Van Tittelboom

Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content

Manu K Mohan (UGent) , Rahul Attupurathu Vijayan (UGent) , Kim Van Tittelboom (UGent) and Geert De Schutter (UGent)

(2021) CEMENT AND CONCRETE RESEARCH. 139.

Add to list

Miscellaneous

Chloride-indringing 3D-geprint beton : onderzoek naar de invloed van de laagopbouw op chloride-indringing en levensduur

Jacques Linssen, Jolien Van Der Putten (UGent) , Melissa De Volder, Philip Van den Heede (UGent) , Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2020) CEMENT. 6(23/09/2020). p.6-11

Add to list

3D concrete printing on site : a novel way of building houses?

Jolien Van Der Putten (UGent) , Alex Van Olmen, Marijke Aerts, Emiel Ascione, Joeri Beneens, Jan Blaakmeer, Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2020) Second RILEM International Conference on Concrete and Digital Fabrication, Digital Concrete 2020. In RILEM Bookseries 28. p.712-719

Add to list

Printed concrete as formwork material : a preliminary study

Michiel Bekaert (UGent) , Kim Van Tittelboom (UGent) and Geert De Schutter (UGent)

(2020) Second RILEM International Conference on Concrete and Digital Fabrication, Digital Concrete 2020. In RILEM Bookseries 28. p.575-583

Add to list

3D printing of concrete : the influence on chloride penetration

Jolien Van Der Putten (UGent) , Melissa De Volder, Philip Van den Heede (UGent) , Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2020) Second RILEM International Conference on Concrete and Digital Fabrication (DC 2020). In RILEM 28. p.500-507

Add to list

Effect of limestone powder substitution on fresh and hardened properties of 3D printable mortar

Yaxin Tao (UGent) , Karel Lesage (UGent) , Kim Van Tittelboom (UGent) , Yong Yuan and Geert De Schutter (UGent)

(2020) Second RILEM International Conference on Concrete and Digital Fabrication - Digital Concrete. In RILEM Bookseries 28. p.135-143

Add to list

Conference Paper
C1
open access

Durability based service life estimation for chloride exposed cracked and self-healed concrete

Nele De Belie (UGent) , Bjorn Van Belleghem (UGent) , Sylvia Keßler, Philip Van den Heede (UGent) and Kim Van Tittelboom (UGent)

(2020) Current topics and trends on durability of building materials and components. p.1901-1908

Add to list

Neutron radiography to study the water ingress via the interlayer of 3D printed cementitious materials for continuous layering

Jolien Van Der Putten (UGent) , Mahzad Azima, Philip Van den Heede (UGent) , Tim Van Mullem (UGent) , Didier Snoeck (UGent) , C. Carminati, J. Hovind, P. Trtik, Geert De Schutter (UGent) and Kim Van Tittelboom (UGent)

(2020) CONSTRUCTION AND BUILDING MATERIALS. 258.

Add to list

Journal Article
A1
open access

Addressing the need for standardization of test methods for self-healing concrete : an inter-laboratory study on concrete with macrocapsules

Tim Van Mullem (UGent) , Giovanni Anglani, Marta Dudek, Hanne Vanoutrive, Girts Bumanis, Chrysoula Litina, Arkadiusz Kwiecień, Abir Al-Tabbaa, Diana Bajare, Teresa Stryszewska, et al.

(2020) SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS. 21(1). p.661-682

Add to list

Evaluating the influence of aggregate content on pumpability of 3D printable concrete

Manu K Mohan (UGent) , Rahul Attupurathu Vijayan (UGent) , Kim Van Tittelboom (UGent) and Geert De Schutter (UGent)

(2020) DC 2020: Second RILEM International Conference on Concrete and Digital Fabrication. In RILEM Bookseries 28. p.333-341

Academic Bibliography

prof. dr. Kim Van Tittelboom

Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content

Chloride-indringing 3D-geprint beton : onderzoek naar de invloed van de laagopbouw op chloride-indringing en levensduur

3D concrete printing on site : a novel way of building houses?

Printed concrete as formwork material : a preliminary study

3D printing of concrete : the influence on chloride penetration

Effect of limestone powder substitution on fresh and hardened properties of 3D printable mortar

Durability based service life estimation for chloride exposed cracked and self-healed concrete

Neutron radiography to study the water ingress via the interlayer of 3D printed cementitious materials for continuous layering

Addressing the need for standardization of test methods for self-healing concrete : an inter-laboratory study on concrete with macrocapsules

Evaluating the influence of aggregate content on pumpability of 3D printable concrete

Contents

Support

Contact