Department of Mechanical construction and production
1564 publications
Show
Sort by
-
Modelling traffic flow with constant speed using the Galerkin finite element method
-
Tribotesting of large-scale specimens: the necessity of proper design
-
Impact of wire EDM on reciprocating sliding fricion and wear response of WC based cemented carbides
-
Parametric model for evaluating the performance of threaded pipe connections
-
- Conference Paper
- C1
- open access
Development of a strain-based flaw assessment methodology for pipeline welds
-
Analysis of the make-up and break-out behaviour of API line pipe threaded connections
-
- Conference Paper
- C1
- open access
Study of the static and fatigue behaviour of threaded pipe connections
-
Online monitoring of polymer matrix composites
-
Abrasive wear of different polymer/steel gear pairs
-
Numerical and experimental analysis of friction of large scale self lubricating radial bearings
-
Friction of polymer/steel gear pairs
-
Experimental investigation of the friction behaviour of engineering plastics on a rotating pin-on-disc type tribotester
-
Influence of secondary electro-conductive phases on the friction and wear response of ZrO2-based composites
-
Mechanische Bewerkingen
(2008) -
Tank test of vessel entry and exit for third set of Panama locks
-
Fatigue testing of carbon fabric thermoplastics: different testing and instrumentation strategies.
-
A clamped three-point bending setup for fatigue of thin composite laminates
-
A modified three-rail shear test for fatigue of composite laminates
-
High strain measurements during fatigue cycling in fibre reinforced thermoplastic composites using imbedded draw tower fibre Bragg grating sensors
-
The effect of concrete floor roughness on bovine claws using finite element analysis
-
Dynamics of a freely rotating cutting brush subjected to variable speed
-
Continuum damage modelling of environmental degradation in joints bonded with EA9321 epoxy adhesive
-
Strength wearout of adhesively bonded joints under constant amplitude fatigue
-
Dynamics and vibration: an introduction
(2008) -
Environmental degradation
-
Research publications in Adhesive bonding technology: Dynamics and vibration of structures ; Fracture mechanics and finite element analysis
(2008) -
Fatigue in adhesive bonding
-
Implementation of supplemental instruction for Surrey engineering students
-
Fatigue damage study of adhesively bonded joints on thick laminated substrates
-
EDM machinability and frictional behaviour of ZrO2-TiCN composites
-
Influence of deceleration phase on properties of friction welded pipelines using intermediate ring
-
Submerged arc welding of thick ferritic martensitic 12Cr stainless steel with a variety of consumables
-
Tribological properties of PVD tool coatings in forming operations of steel sheet
-
- Conference Paper
- C1
- open access
Experimental and numerical study of the energy absorption capacity of pultruded composite tubes
-
Influence of electrical discharge machining on tribological behavior of ZrO2-TiN composites
-
Reciprocative sliding wear of ZrO2-TiCN composites against WC-Co cemented carbide
-
Contact pressure distribution in postmortem human knee during dynamic flexion-extension movement
-
Physically based modeling of the mechanical behavior of TRIP steels
-
Testing of a prestressed concrete girder to study the enhanced performance of monitoring by integrated optical fiber sensors, part 1
-
Knee biomechanics of cadavric knees
-
Influence of forge pressure on properties of friction welded pipelines using intermediate ring
-
- Conference Paper
- C1
- open access
Influence of the geometry of hat-shaped specimens on the formation of adiabatic shear bands
-
EXPERIMENTAL INVESTIGATION OF THE FRICTION DYNAMICS FOR APPLICATION IN WET-FRICTION CLUTCHES
-
Influence of secondary electro-conductive phases on the tribological response of Zirconia based composites against WC-Co cemented carbide
-
Biomechanical behavior of the patello-femoral joint
-
Design and construction of pin-on-disc test rig, importance of loading system
-
Evaluating self-lubricating materials for large scale bearings functioning under seawater conditions
-
The sliding behaviour of sintered and thermoplastic polyimides investigated by thermal and Raman spectroscopic measurements
-
Effect of graphite powder on sliding performance of sintered polyimide composites at various normal loads and sliding velocities
-
Patello-femoral contact pressures
-
Analysis of a preloaded conical threaded pipe connection
-
Extended characterisation and modelling of TRIP steel sheet materials and structures
-
Blast loading response of typical coca-cola cans
-
Influence of electrical discharge machining on the reciprocating sliding friction and wear response of WC based cemented carbides
-
Reciprocating sliding friction and wear behavior of Zirconia-based composites against WC-Co cemented carbide
-
Influence of surface finishing on tribological behavior of ZrO2-based ceramic composites against WC-Co cemented carbides
-
EDM machinability and dry sliding friction and wear behavior of Zirconia composites
-
Comparison of classic and robust Gauss filtering for the determination of waviness of non-isotropic surfaces
-
- Conference Paper
- C1
- open access
Aesthetic surfaces created with the Electron Beam texturing technology
-
A new device for fretting fatigue testing
-
Interpretation of sliding-roll phenomena in the examination of knee biomechanics
-
- Conference Paper
- C1
- open access
MSC.ADAMS programrendszer felhasználása a biomechanikai modellezésben
-
Computational human knee joint model for determining sliding-rolling properties
-
- Journal Article
- A2
- open access
Csúszva gördülés értelmezése térdízület biomechanikai vizsgálatához
-
Comparison of the modified three-rail shear test and the [(+45 degrees,-45 degrees)](ns) tensile test for pure shear fatigue loading of carbon fabric thermoplastics
-
On the repeatability of friction and wear tests for polyimides in a hertzian line contact
-
Patellofemoral contact pressures
-
Identification of wear mechanisms of glass/polyester composites by means of acoustic emission
-
Dry reciprocating sliding friction and wear response of WC-Ni cemented carbides
-
Influence of secondary electro-conductive phases on the electrical discharge machinability and frictional behavior of ZrO2-based ceramic composites
-
Realistic finite element-based stent design: The impact of balloon folding
-
Tribochemical reactions on polyimide sliding surfaces evaluated with Raman spectroscopy and atomic force microscopy
-
Design of mechanical clamps with extra long wedge grips for static and fatigue testing of composite materials in tension and compression
-
Design of a modified three-rail shear test for shear fatigue of composites
-
Sliding wear of electrically conductive ZrO2-WC composites against WC-Co cemented carbide
-
A finite element analysis of scarf joint for controlling the triaxiality function in adhesive bonding
-
Electrical resistance measurement on carbon fiber-reinforced thermoplastics with rivets as electrodes
-
Interaction between material properties, inspection accuracy and defect acceptance levels in strain based pipeline design
-
- Journal Article
- A1
- open access
Liquid metal embrittlement susceptibility of ferritic-martensitic steel in liquid lead alloys
-
- Journal Article
- A1
- open access
Astir: An irradiation experiment in liquid Pb-Bi eutectic environment
-
The use of optical fibers for fatigue testing of fiber-reinforced thermoplastics
-
Non-destructive evaluation of composite structures using an innovative Bragg sensor
-
Monitoring of a curved beam test structure using Bragg sensors
-
Calculation and significance of the maximum polymer surface temperature T* in reciprocating cylinder-on-plate sliding
-
Effectividad de los cepillos laterales para barrido de calles
-
Determinación del coefficiente de fricción entre cerdas de acero de cepillos laterales para barrer calles
-
- Conference Paper
- C1
- open access
Numerical methods for determining local motions of human knee joint
-
Biomechanics of the human knee joint
-
- PhD Thesis
- open access
Advanced Use of a Split Hopkinson Bar Setup - Application to TRIP Steels
(2008) -
- PhD Thesis
- open access
Experimental and numerical study of different setups for conducting and monitoring fatigue experiments of fibre-reinforced thermoplastics
(2008) -
- Conference Paper
- P1
- open access
A thin foil optical strain gage based on silicon-on-insulator microresonators - art. no. 661914
-
Influence of surface finishing and binder phase on friction and wear of WC based hardmetals
-
Heating effects in WC-Co cemented carbides as a result of reciprocative dry sliding friction
-
Reciprocating friction and wear behavior of WC-Co based cemented
-
Influence of secondary electro-conductive phases on sliding wear performance of zirconia based ceramic composites
-
Edge effects in sliding wear behavior of ZrO2-WC composites and WC-Co cemented carbides
-
Torsional vibrations of wet clutches : influence of mechanical parameters
-
Thermal and spectroscopic analysis of worn polyoxymethylene surfaces and wear debris explaining degradation and polymerisation mechanisms
-
Friction, wear and transfer of pure and internally lubricated cast polyamides at various testing scales
-
Application of ultrasonic phased array for nondestructive detection of damage in biaxial cruciform
-
Glass-Metal Joining in Nuclear Environment: The State of the Art
-
Numerical modelling of wave energy absorption by a floating point absorber system
-
Biaxial testing of fibre reinforced composites
-
Monitoring fatigue damage in fibre-reinforced plastics through the Poisson's ratio degradation
-
Performance of a point absorber heaving with respect to a floating platform
-
Wave energy extraction in the North Sea by a heaving point absorber
-
A review of biaxial test methods for composites
-
Leaky Rayleigh waves propagating around the corner of a thick solid plate
-
A methodology for evaluating the controllability of a ship navigating in a restricted channel
-
Caracteristicas morfologicas de los dientes anteriores y su efecto sobre la torsion.
-
- Journal Article
- A2
- open access
Reciprocating friction and wear behavior of WC-Co based cemented carbides manufactured by electro-discharge machining
-
- Journal Article
- A2
- open access
Influence of surface finishing and binder phase on friction and wear of WC based hardmetals
-
- Journal Article
- A2
- open access
Influence of secondary electro-conductive phases on sliding wear performance of zirconia based ceramic composites
-
- Journal Article
- A2
- open access
Edge effects in sliding wear behavior of zirconia-based nanocomposites and WC-Co based cemented carbides
-
- Journal Article
- A2
- open access
Heating effects in WC-Co cemented carbides as a result of reciprocative dry sliding friction
-
Material Test requirements for Strain-Based Pipeline Design
-
Extended dynamic characterization and modelling of multiphase trip steels for automotive applications
-
On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions
-
Analysis of a curved composite test specimen with Fibre Bragg gratings
-
Study of the deformation characteristics of window security film with optical techniques
-
Development of a sliding tester
-
Ground reaction force of a drop jump on different kinds of artificial turf
-
- Conference Paper
- C1
- open access
Influence of Secondary Electro-Conductive Phases on the Electrical Discharge Machineability and Tribological Behavior of Zirconia-Based Ceramic Composites
-
Dynamic behaviour and modelling of multiphase trip steels: A comparison between the phenomenological and micro-mechanical approach
-
Comparison of different set-ups for fatigue testing of thin composite laminates in bending
-
A new method to test the resilience of a yarn for application in artifical turf
-
Development of a setup for the study of ball roll behaviour in soccer on artificial turf
-
The sliding tester: a new testing device for artificial turf
-
Development of high-performance artificial turf for soccer applications
-
- Conference Paper
- C1
- open access
Evaluation of Glass Domes Using PyFormex
-
Strain monitoring in thermoplastic composites with optical fiber sensors: embedding process, visualization with micro-tomography, and fatigue results
-
Physical based model static and dynamic behaviour of TRIP steel
-
Modelling rotary sweeping brushes and analyzing brush characteristic using finite element method
-
Dynamics of an unconstrained oscillatory flicking brush for road sweeping
-
Continuum damage modelling of environmental degradation in joint bonded with E32 epoxy adhesive
-
Fatigue initiation in adhesively-bonded single-lap joints
-
Modelling the environmental degradation of adhesively bonded aluminium and composite joints using a CZM approach
-
Design of a tribotester for evaluation of polymer components under static and dynamic sliding conditions
-
Effect of test scale on the friction properties of pure and internal-lubricated cast polyamides at running-in
-
New friction welding process for pipeline girth welds: parameter optimization
-
- Journal Article
- A1
- open access
Gas metal arc welding of modified X2CrNi12 ferritic stainless steel
-
Online wear monitoring of polymer matrix composites with advanced measurement techniques
(2007) -
Influence of cylinder-on-plate or block-on-ring sliding configurations on friction and wear of pure and filled engineering polymers
-
Experimental extrapolation model for friction and wear of polymers on different testing scales
-
Wear debris analysis of polyoxymethylene by DTA/TGA and mathematical morphology
-
Knee-simulator for the analysis of patello-femoral forces
-
A combination of mathematical morphology and thermal analysis of wear debris explaining polymer sliding mechanisms
-
Finite element stent design: modeling braided wirestent expansion
-
The impact of plasticity on the mechanical behavior of cardiovascular stents during insertion and after placement
-
Optimization of self-expandable braided wire stents
-
- Conference Paper
- C1
- open access
Fatigue Behaviour of Threaded Pipe Connections
-
Impact of the balloon folding pattern on the transient stent expansion behaviour: a finite element study
-
Improving side branch access during bifurcation stenting - a finite element study
-
Finite element analysis of bifurcation stenting
-
Impact of the balloon folding pattern on the stent strut distribution
-
Numerical simulations and bifurcation stenting: a promising combination
-
Impact of the balloon folding pattern on the transient stent expansion behaviour - A finite element study
-
Efficiency of graphite additives on friction and wear properties of sintered polyimide
(2007) ANTEC 2007. -
Thermo-analytical evaluation of wear debris for thermoplastic and sintered polyimide
-
The efficiency of internal lubricants for polymers under various sliding conditions: an overview of tribophysical phenomena
-
Tribochemical reactions on polyimide sliding surfaces evaluated with Raman spectroscopy and atomic force microscopy
-
Plasticity as a lifesaver in the design of cardiovascular stents
(2007) ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2. 340-341. p.841-846 -
Plasticity in the mechanical behaviour of cardiovascular stents during stent preparation (crimping) and placement (expansion)
(2007) ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2. 340-341. p.847-852 -
Finite element stent design: Parametric modeling of braided wirestents using pyformex
-
Friction and wear mechanisms of sintered and thermoplastic polyimides under adhesive sliding
-
Inverse method for parameter determination of biaxially loaded cruciform composite specimens
-
Blast loading response of typical steel cans
-
Simulating the plastic bending of innovative tube connections.
-
Experimental evaluation of fracture matching methods based on 3D imaging techniques
-
Laser cutting of tubes: possibilities in lightweight structures
-
Feasibility study of an embedded Multi-Axial fibre bragg grating sensor
(2007) PROCEEDINGS OF THE SOCIETY OF PHOTO-OPTICAL INSTRUMENTATION ENGINEERS (SPIE). 6585. p.U113-U122 -
A relation between laboratory and full-scale testing of polyester/polyester composites under static and dynamic load
-
Projection moire measurement of the deflection of composite plates subject to bird strike impact - art. no. 66162Z
-
Effect of microstructure on edge wear mechanisms in WC–Co
-
How hardmetals react to wear: nano is not always the best
-
Online wear monitoring of polymer matrix composites
-
Effect of triaxiality on damage parameters in adhesive
-
Fast characterization of carbon/epoxy rings for use in the ball-joints of the Maeslant storm surge barrier
-
Characterization of composites for use in the ball-joints of the Maeslant storm surge barrier
-
Edge effects in sliding wear behavior of ZrO/sub 2/-WC composites and WC- Co cemented carbides
-
Damage assessment of adhesively bonded FRP beams using modal parameters
-
Apical root resorption of upper incisors during the torquing stage of the tip-edge technique
-
The use of rivets for electrical resistance measurement on carbon fibre-reinforced thermoplastics
-
Modeling the maneuvering behavior of container carriers in shallow water
-
Wear transitions and stability of polyoxymethylene homopolymer in highly loaded applications compared to small-scale testing
-
A methodology for evaluating the controllability of a ship navigating in a restricted channel
-
Poisson's ratio as a sensitive indicator of (fatigue) damage in fibre-reinforced plastics
-
Influence of surface finishing and binder phase on friction and wear of WC based hard metals
-
Heating effects in WC-Co cemented carbides as a result of reciprocative dry sliding friction
-
Reciprocating friction and wear behavior of WC-Co based cemented carbides manufactured by electro-discharge machining
-
Short-beam-shear testing of composite rings with variable cross section as representative for full-scale delamination
-
Global analysis and constructional aspects in the redesign of bearing elements for a movable storm surge barrier
-
Full-scale analysis of deformation and stress distribution for constrained composite bearing elements under compressive yielding conditions
-
Finite element analysis of transmission of leaky Rayleigh waves at the extremity of a fluid-loaded thick plate
-
Investigation of a failed axle of a reduction gearbox
-
Dynamic response of aluminium containing TRIP steel and its constituent phases
-
Frictional behavior of glass fiber reinforced polyester under different loads
-
Atomic force microscopy of sintered and thermoplastic polyimide surfaces after macroscopic wear tests
-
Testing of a prestressed concrete girder to study the enhanced performance of monitoring by integrating optical fiber sensors
-
Three-dimensional strain and temperature monitoring of composite laminates
-
The effect of silicon, aluminium and phosphor on the dynamic behaviour and phenomenological modelling of multiphase TRIP steels
-
Evaluation of safety of navigation in muddy areas through real-time maneuvering simulation
-
Acoustic emission as analyzing tool for wear mechanisms of composite materials
-
Comparison of different identification techniques for measurement of quasi-zero Poisson's ratio of fabric-reinforced laminates
-
- PhD Thesis
- open access
Manoeuvreergedrag van containerschepen in slibrijke vaarwateren Manoeuvring Behaviour of Container Vessels in Muddy Navigation Areas
(2007) -
- Conference Paper
- C1
- open access
Improving side branch access during bifurcation stenting: a finite element study
-
- PhD Thesis
- open access
Tribophysical Interpretation of Scaling Effects in Friction and Wear for Polymers
(2007) -
Influence of loading rate on concrete cone failure
-
Multi-axial fiber Bragg sensors for monitoring purposes
-
Prediction of ship manoeuvrability of an 8000 TEU containership in deep and shallow water: mathematical modelling and captive model testing
-
Characterisation of the high strain rate properties of advanced high strength steels
-
Dynamic characterization and modelling of multiphase TRIP steels for automotive applications
-
The sliding behaviour of sintered and thermoplastic polyimides investigated by thermal and Raman spectroscopic measurements
-
The 45° fibre orientation and its influence on the frictional behaviour of composites
-
Finite element model of the free expansion of a 3-folded angioplasty balloon
-
Finite Element Simulation of the free Expansion of the Cypher Stent Crimped on a Tri-folded Balloon
-
A novel way to build geometric models of wire stents
-
A novel methodology for revision of the nautical bottom.
-
A novel way to build geometric models of wire stents
-
Thermal transitions in polyimide transfer under sliding against steel, investigated by Raman spectroscopy and thermal analysis
-
Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites
-
Finite element simulation of the free expansion of the Cypher stent crimped on a tri-folded balloon
-
FEASIBILITY STUDY ON MEASURING AXIAL AND TRANSVERSE STRESS/STRAIN COMPONENTS IN COMPOSITE MATERIALS USING BRAGG SENSORS
-
Fiber optic sensing system for discriminating multi-axial strain components in composite elements
-
Fracture assessment of carbon fibre/epoxy reinforcing rings through a combination of full-scale testing, small-scale testing and stress modeling
-
Impact damage model for fibre-reinforced composite materials
-
Monitoring of fatigue, impact and wear in Cetex TPC
-
Characterization of composites for the Maeslant storm surge barrier
-
Reliable small-scale qualification tests for carbon/epoxy rings in the Maeslant storm surge barrier
-
Experimental charaterisation and numerical modelling of impact damage in fibre-reinforced composites
-
Optimization of digital speckle photography for study of the tear resistance of window security film
-
The nautical bottom concept in the harbour of Zeebrugge
-
Effects of a muddy bottom on the straight-line stability
-
A new approach for defining the nautical bottom in the harbour of Zeebrugge
-
Electroslag Welding Process and Industrial Applications (Elektrocuruf Kayanak Yöntemi ve Endüstriyel Uygulamalari)
-
New 12% Cr-steel for tubes and pipes in power plants with steam temperatures up to 650 °C - Weldability and high temperature behavior
-
Friction stir welding of a high pressure EN AC-4600 die cast aluminium alloy
-
Roestvast staal type X2CrNi12 voor constructiedoeleinden - Lasbaarheid, lastechnologie en eigenschappen van gelaste verbindingen Acier inoxydable type X2CrNi12 de construction - Soudabilité, technologie du soudage et propriétés des soudures
-
Chromium stainless steels and modified types Kromlu Paslanmaz çelikler ve modifiye edilmiş türleri
-
Friction stir welding and hybrid laser welding applied to 6056 alloy
-
Weldability and high temperature behaviour of 12%Cr-steel for tubes and pipes in power plants with steam temperatures up to 650°C
-
Weldability and high temperature behavior of 12% Cr-steel for tubes and pipes in power plants with steam temperatures up to 650 °C
-
Toekomst van het wetenschappelijk lasonderzoek - Keynote lecture
-
On the design of ships for estuary service
-
Risk analysis for inland vessels in estuary service
-
Numerical modelling of wave energy absorption by a floating point absorber system
-
Softening and melting mechanisms of polyamides interfering with sliding stability under adhesive conditions
-
Friction induced conformational changes on large-scale and small-scale polyester sliding surfaces
-
Friction and wear evaluation of internal lubricated polyamides at various testing scales
-
Experimental Study of the Friction and Wear Behaviour of a Polymer Disc / Primer Coating Combination Used in Ball-Joints by Means of Large-Scale Testing